Abstract:A set of triaxial magnetic transmitting coils fed with low frequency sinusoidal signals can be tracked with a rotating uniaxial sensing coil. This is because the specific output signal of the sensing coil will reach a maximum value when the direction of its induced magnetic field points to the transmitting coils. Usually, a rotating method is used to find the maximum output direction based on the output signals from the sensing coil. This method needs a horizontal rotation phase and a vertical rotation phase to search for the maximum output and its accuracy depends on the rotation step size. In order to simplify the rotation process while maintaining the accuracy without reducing the rotation step size, an improved magnetic tracking method is proposed in this paper. It is found that when the sensing coil rotates in the horizontal plane, the specific output signals compose a sinusoidal curve. By extracting the amplitude, phase, and dc component of this sinusoidal signal, the distance and direction information between the sensing coil and transmitting coils can be estimated and no vertical rotating phase is needed. Another advantage of this method is that the tracking accuracy does not depend on the rotation step size once the sampling rate fulfills the Nyquist-Shannon sampling theorem. Therefore, we can use sparse points to reconstruct the sinusoidal signal. Experimental results will show the effectiveness of this tracking method.

An electromagnetic tracking method based on fast determination of the maximum magnetic flux density vector represented by two azimuth angles

Research of an Electromagnetic Tracking Method Based on Two Electrically-Controlled Magnetic Sources

Real-Time Orientation-Invariant Magnetic Localization and Sensor Calibration Based on Closed-Form Models

An Electromagnetic Tracking Method Based on Phase Difference Detection

An Electromagnetic Tracking Method Using Rotating Orthogonal Coils

An Efficient Magnetic Tracking Method Using Uniaxial Sensing Coil

A Novel Non-Model-Based 6-Dof Electromagnetic Tracking Method Using Non-Iterative Algorithm

6-D Electromagnetic Tracking Approach Using Uniaxial Transmitting Coil and Tri-Axial Magneto-Resistive Sensor

An analytic algorithm based position and orientation detection using a tri-axial magnetoresistive sensor.

A Three-Axis Magnetic Sensor Array System for Permanent Magnet Tracking.

Dual Vector Aeromagnetic Survey Based Gradient Imaging and Detection of Target Magnetic Anomaly

A New Electromagnetic Positioning Method for Tracking Invaded Medical Devices Using Marg Sensors

An Improved Magnetic Tracking Method Using Rotating Uniaxial Coil With Sparse Points and Closed Form Analytic Solution

Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains

An Electromagnetic Localization and Orientation Method Based on Rotating Magnetic Dipole

A Robust Tracking Method for Multiple Moving Targets Based on Equivalent Magnetic Force

Localization of Ferromagnetic Target with Three Magnetic Sensors in the Movement Considering Angular Rotation.

An Efficient Method for Tracking a Magnetic Target Using Scalar Magnetometer Array.

The Simulations and Experiments of the Electromagnetic Tracking System Based on Magnetic Dipole Model

Multiple Objects Positioning and Identification Method Based on Magnetic Localization System

[Design of Electromagnetic Tracking System Using Rotating Magnetic Field Based on DSP].