Abstract:High-performance polymer-based aerogel fibers with ultrahigh porosity, mechanical robustness and outstanding thermal stability are demanded for applying in effective thermal insulation devices, especially in harsh environment. However, the poor mechanical properties and thermal stability of the commonly reported polymer-based aerogel fibers restricted their applications in many areas. As a special nano-build-block, aramid nanofiber-based aerogel fiber is expected to conquer this problem in virtue of the outstanding performance, intrinsically related to aramid fibers. Herein, a series of aramid nanofiber-based aerogel fibers were fabricated via a facial wet-spinning method combined with freeze–drying technique. The effects of coagulation bath temperature and the solid contents of the spinning precursors on their morphologies and mechanical properties were systematically studied. The obtained aerogel fibers possessed high porosity (> 92%), good mechanical properties (tensile strength ~ 8.1 MPa) and high specific surface area (~ 239 m2/g). Meanwhile, the woven textiles exhibited a low thermal conductivity (~ 34 mW/(m·K)) and outstanding thermal insulation properties under a wide range of temperature. In addition, surface modification by Teflon resin could make the ANAFs hydrophobic, thus exhibiting their applicational prospects in a humid environment. Overall, the aramid nanofiber-based aerogel fibers and their textile throw light in a favorable direction for developing high-performance thermal insulation fibers and textiles.Graphical AbstractAramid nanofiber-based aerogel fibers with high porosity (> 92%), good mechanical properties (tensile strength ~ 8.1 MPa) and high specific surface area (~ 239 m2/g) are fabricated by a novel and facial strategy including wet-spinning, solvent replacement and freeze–drying processes. Meanwhile, the weaved textiles exhibit a low thermal conductivity (~ 34 mW/(m·K)) and outstanding thermal insulation properties under a wide range of temperatures.

Nanoporous SiO 2 Grafted Aramid Fibers with Low Thermal Conductivity

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Gradient All-Nanostructured Aerogel Fibers for Enhanced Thermal Insulation and Mechanical Properties

Controllable Strong and Ultralight Aramid Nanofiber-Based Aerogel Fibers for Thermal Insulation Applications

Aramid Fibers Reinforced Silica Aerogel Composites with Low Thermal Conductivity and Improved Mechanical Performance

Flexible Silica Aerogel Composites Strengthened with Aramid Fibers and Their Thermal Behavior

Experimental Characterization of the Thermal Conductivity and Microstructure of Opacifier-Fiber-Aerogel Composite

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Ultra-Light and Ultra-Low Thermal Conductivity of Elastic Silica Nanofibrous Aerogel with TiO2 Opacifier Particles as Filler

Biomimetic Nanoporous Aerogels from Branched Aramid Nanofibers Combining High Heat Insulation and Compressive Strength

A study on aramid nano-aerogel fiber and its fabric thermal conductivity

A Synergistic Strategy for Fabricating an Ultralight and Thermal Insulating Aramid Nanofiber/polyimide Aerogel

Silica Aerogel/aramid Pulp Composites with Improved Mechanical and Thermal Properties

Synthesis and characterization of ambient-dried microglass fibers/silica aerogel nanocomposites with low thermal conductivity

Thermal Conductivity of Fiber and Opacifier Loaded Silica Aerogel Composite

Bio-Inspired Aramid Fibers@silica Binary Synergistic Aerogels with High Thermal Insulation and Fire-Retardant Performance

Fumed Silica-Derived, Ambient Dried, and Low-Cost Nanoporous Aerogel-like Monoliths for Thermal Insulation

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

A lightweight and high compressive resistance thermal insulation material with dual-network structure

Preparation of needled nonwoven enhanced silica aerogel for thermal insulation

Electrospun nanofiber composites with micro-/nano-particles for thermal insulation