Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Enhanced H2S Gas Sensing Properties Based on SnO2 Quantum Wire/reduced Graphene Oxide Nanocomposites: Equilibrium and Kinetics Modeling

Sensitive Room-Temperature H2S Gas Sensors Employing SnO2 Quantum Wire/Reduced Graphene Oxide Nanocomposites

Facile synthesis of reduced graphene oxide/hexagonal WO3 nanosheets composites with enhanced H2S sensing properties

Reduced Graphene Oxide Mediated SnO2 Nanocrystals for Enhanced Gas-sensing Properties

Porous CuO/SnO2 Composite Nanofibers Fabricated by Electrospinning and Their H2S Sensing Properties

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Rgo Doped Mofs-Derived Cuo Nanocomposites As Flexible Room-Temperature Sensors for Ppb-Level H2s Detection

Formaldehyde Sensing Performance of Reduced Graphene Oxide-Wrapped Hollow SnO2 Nanospheres Composites

High-response H2S sensor based on ZnO/SnO2 heterogeneous nanospheres

Highly Selective Detection of Sulfur Hexafluoride Decomposition Components H2S and SOF2 Employing Sensors Based on Tin Oxide Modified Reduced Graphene Oxide

Ultraviolet-Induced Gas Sensing Performance of Ag/WO 3 /rGO Nanocomposites for H 2 S Gas Sensors

Enhanced Catalytic Activity of SnO2 Quantum Dot Films Employing Atomic Ligand-Exchange Strategy for Fast Response H2S Gas Sensors

3D Porous MXene Nanosheet/SnO2 Nanoparticle Composites for H2S Gas Sensing

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Solution-processed SnO2 nanowires for sensitive and fast-response H2S detection

Hydrothermal Fabrication of Ag-Decorated MoSe₂/Reduced Graphene Oxide Ternary Hybrid for H₂S Gas Sensing

Microwave-assisted Preparation of Hierarchical CuO@rGO Nanostructures and Their Enhanced Low-Temperature H2S-sensing Performance

The Enhanced NO2 Sensing Properties of SnO2 Nanoparticles/reduced Graphene Oxide Composite.

Solution-Processed Metal Doping of Sub-3 nm SnO2 Quantum Wires for Enhanced H2S Sensing at Low Temperature

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Cu2+-Doped SnO2 Nanograin/Polypyrrole Nanospheres with Synergic Enhanced Properties for Ultrasensitive Room-Temperature H2S Gas Sensing.