Abstract:Solid–liquid phase change problems have been extensively investigated by the lattice Boltzmann (LB) method in the past two decades, and the usual Boussinesq approximation with the assumption that the fluid density linearly varies with the temperature is widely applied. However, the actual variation of the fluid density with the temperature could be very complex for the phase change material near its solidus and liquidus temperatures. In this work, a double-distribution-function LB model is adopted to simulate the melting and solidification processes in a square cavity. The buoyancy force is directly calculated via the fluid density determined by temperature rather than the usual volume expansivity and temperature difference, and thus the present LB model can handle the nonlinear variation of the fluid density. Four different density variations (i.e., linear expansion, convex expansion, concave expansion, and water) are considered. The simulation results show that the convex and concave expansion variations can be roughly approximated by the linear expansion variation for both the melting and solidification processes. Due to the anomalous expansion over the temperature range of 0–4.0293 °C, the water variation cannot be approximated by the linear expansion variation, unless the involved temperature range is relatively large. The density variation determines the structure and strength of natural convection, thereby significantly affecting the melting and solidification processes.

2D and 3D Lattice Boltzmann Simulation for Natural Convection Melting

Lattice Boltzmann Simulation for Three-Dimensional Natural Convection with Solid-Liquid Phase Change

Lattice Boltzmann Method for Heat Transfer in Melting with Natural Convection

Lattice boltzmann simulation of melting problem

Lattice Boltzmann Method Simulation of 3-D Melting Using Double MRT Model With Interfacial Tracking Method

Analysis of Melting with Natural Convection and Volumetric Radiation Using Lattice Boltzmann Method

Three-Dimensional Numerical Simulation of Thermosolutal Convection in Enclosures Using Lattice Boltzmann Method

Comparative study on natural convection melting in square cavity using lattice Boltzmann method

Lattice Boltzmann Simulation of Melting in a Cubical Cavity with a Local Heat-Flux Source

A New Lattice Boltzmann Model for Solid–liquid Phase Change

Lattice boltzmann simulation of natural convection dominated melting in a rectangular cavity filled with porous media

Simulation study for melting of porous media in a square cavity based on the pore scale

Probing the Rayleigh–Benard Convection Phase Change Mechanism of Low-Melting-point Metal Via Lattice Boltzmann Method

Investigation of Heat Source Location on Solid-Liquid Phase Change Using Lattice Boltzmann Method

Lattice Boltzmann Simulation of Convection Melting in Complex Heat Storage Systems Filled with Phase Change Materials

An Improved Lattice Boltzmann Method for Solid-Liquid Phase Change in Porous Media under Local Thermal Non-Equilibrium Conditions

Lattice Boltzmann Simulation of Tree-Shaped Fins Enhanced Melting Heat Transfer

Lattice Boltzmann Modeling of Melting of Phase Change Materials in Porous Media with Conducting Fins

Lattice Boltzmann Method Simulation of 3-D Natural Convection with Double MRT Model

Lattice Boltzmann Simulation of Solid–liquid Phase Change with Nonlinear Density Variation

Three–dimensional Lattice Boltzmann Models for Solid–liquid Phase Change