Abstract:Microseismic source location is a fundamental research interest in real-time microseismic monitoring and hazard risk assessment, and it provides the basis for determining the fracture zones and calculating seismic source parameters of the microseismicity (e.g., the event magnitude, the focal mechanism). In the present work, we carefully relocate some microseismic earthquakes that occurred in the Yongshaba mine (China) using the shooting 3-D ray-tracing (3D-RT) method based on a high-resolution 3-D velocity model, which is determined by a large amount of seismic data. Furthermore, a semiautomatic waveform cut method based on the cross-correlation (CC) technique (WCC) is developed for a quick, robust and precise determination of the direct P-phase relative delay times. Compared with the full waveform cross-correlation (FWCC)-based method, the WCC-based method is free from the influence of complex later-phase waveform spectra. To verify the proposed method, we artificially generate the locations of 892 synthetic microseismic events, the P-phase travel times of which are calculated based on the given 3-D velocity model and the 3-D ray-tracing technique. The relocated hypocentres of these synthetic events obtained by the developed method are improved compared with those obtained by a homogeneous velocity model and the straight line-ray tracing based L1 norm time difference (TD) method (HV-SL-TD1), as well as those obtained by the 3-D velocity model and the straight line-ray tracing based L1 norm and L2 norm TD methods (3D-SL-TD1 and 3D-SL-TD2). Finally, we apply the proposed method to eight experimental blasts with pre-measured locations. The synthetic and application tests show that, despite some multi-path phenomena existing in the ray-tracing methods, the WCC-based method performs as well as the experienced manual picking method, and the results obtained by the 3D-RT location have smaller location errors (~30 m) than those of the homogeneous velocity model-based methods (>40 m). The TD-based method is slightly better than the trigger time (TT)-based method when using the same norm, and the location precision of the L1 norm-based methods have a better resilience to larger picking errors than that of the L2 norm-based methods. Further improvements can be obtained by improving the resolution of the 3-D velocity model and including spatial voids in the model (e.g., tunnels and cavities) for the inversion.

Micro-Seismic Monitoring in Mines Based on Cross Wavelet Transform

Estimation of TDOA with Cross Wavelet Analysis

Source Identification of Microseismic Events in Underground Mines with Interferometric Imaging and Cross Wavelet Transform

Micro-seismic Event Detection and Location in Underground Mines by Using Convolutional Neural Networks (CNN) and Deep Learning

Automatic Microseismic Event Detection and Arrival Picking Based on Waveform Cross-Correlation

Automatic P-Phase-Onset-Time-Picking Method of Microseismic Monitoring Signal of Underground Mine Based on Noise Reduction and Multiple Detection Indexes

Microseismic Time Delay Estimation Method Based on Continuous Wavelet

Microseismic Source Location Using the Log-Cosh Function and Distant Sensor-Removed P-wave Arrival Data

Frequency spectrum analysis on microseismic monitoring and signal differentiation of rock material

The Monitoring of Microseismic Clusters from the Joint of the Reversed P and S Wave Fields

Automatic Events Recognition in Low SNR Microseismic Signals of Coal Mine Based on Wavelet Scattering Transform and SVM

Detection and Monitoring of Mining-Induced Seismicity Based on Machine Learning and Template Matching: A Case Study from Dongchuan Copper Mine, China

Recognition of mine microseismic signals based on FSWT time-frequency analysis

Study on effective seismic signals identification method based on WPT-LMD pre-processing method

Theoretical and Experimental Studies of Localization Methodology for AE and Microseismic Sources Without Pre-Measured Wave Velocity in Mines.

Relocating Mining Microseismic Earthquakes in a 3-D Velocity Model Using a Windowed Cross-Correlation Technique

Adaptive filtering of microseismic data for monitoring a water-conducting fractured zone in a mine

A novel identification method of microseismic events based on empirical mode decomposition and artificial neural network features

A Waveform Image Method for Discriminating Micro-Seismic Events and Blasts in Underground Mines

Microseismic event detection based on synchrosqueezing wavelet transform

Application of Multistep Source Localization Method with Narrowing Velocity Interval in Mines