Abstract:Developing advanced electrochemical double-layer supercapacitors (EDLCs) with high energy density and capacitance can be realized by exploring the electrodes possessing large specific surface area and high electronic conductivity. Here, we fabricated rambutan-like activated carbon sphere/carbon nanotube (ACS/CNT) composites which can be used as electrode materials in EDLCs. Curved CNTs have a polycrystalline structure with tens of nanometers in diameter and hundreds of nanometers in length and are uniformly grown on the surface of the ACS. The unique three-dimensional (3D) microstructure contributes to the ideal electrochemical performance of composite electrodes by combining high specific surface area and superior electrical conductivity. The specific capacitance of the ACS/CNT composite is 180 F/g, which is over threefold that of the pristine ACS electrode at a current density of 2.5 A/g. ACS/CNT electrodes exhibit an excellent cyclical ability at 10 mV/s sweep rate in the working voltage range, and the capacitance retention is almost 80% after 1000 cycles. The preparation of 3D microstructure opens up a new way of designing electrodes with a 3D conductive network and lays the foundation for the development of lightweight energy storage supercapacitors.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c00189?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c00189</a>.Morphology and microstructure of the rambutan-like composite; N2 adsorption isotherms and the BJH pore size distributions of the ACS and ACS/CNT composite with different CNT proportions; comparison of galvanostatic charge/discharge times in the discharge process between the pristine ACS and ACS/CNT composite electrode; rate capability of the ACS/CNT composite electrode at current densities of 0.25, 0.60, 1.25, 2.50, and 5.00 A g–1 in the range 0.01–0.4 V; cycling life of the ACS/CNT composite electrode used in a supercapacitor in the range 0.01–0.4 V; cycling life of the ACS/CNT composite electrode used in a supercapacitor in the cutoff voltage range 0.01–1.0 V at a current density of 0.125 A/g; corresponding size distribution of the ACS, nickel catalyst and CNTs grown on the surface of the ACS in the following preparation process; analysis parameters of the EELS C k edge with a fitting range of 120 eV and signal being extracted from 279 eV; Raman spectra of the ACS/CNTs and the ACS samples; specific surface area and pore volume for the ACS/CNTs and the ACS samples; and comparison of specific capacities of various carbon materials as supercapacitor electrode materials (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c00189/suppl_file/ef1c00189_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication and Activation of Carbon Nanotube Foam and Its Application in Energy Storage

Expanded Carbon Nanotube Fiber at the Liquid-Air Interface for High-Performance Fiber-Based Supercapacitors and Electrochemical Sensors

Core-Shell Assembly Of Carbon Nanofibers And A 2d Conductive Metal-Organic Framework As A Flexible Free-Standing Membrane For High-Performance Supercapacitors

Design of a porous cobalt sulfide nanosheet array on Ni foam from zeolitic imidazolate frameworks as an advanced electrode for supercapacitors.

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

In Situ Growth of Nico2s4 Nanotube Arrays on Ni Foam for Supercapacitors: Maximizing Utilization Efficiency at High Mass Loading to Achieve Ultrahigh Areal Pseudocapacitance

Synthesis of Three Dimensional Carbon Nanostructure Foams for Supercapacitors

Preparation of Three-Dimensional Carbon Microtube/Carbon Nanotube Composites and Their Application in Supercapacitor

A novel catalyst derived from Co-ZIFs to grow N-doped carbon nanotubes for all-solid-state supercapacitors with high performance

Fabrication of Rambutan-like Activated Carbon Sphere/Carbon Nanotubes and Their Application as Supercapacitors

Carbon nanotubes aerogels dispersed by thermal excitation on Ni Foam@NiCo2O4 nanoneedles with enhanced properties for supercapacitor

Fabrication of high value cellulose nanofibers@Ni foam by non carbonization: various application developed during the preparation

Heteroatom doping and activation of carbon nanofibers enabling ultrafast and stable sodium storage

Electrochemical Activation‐Induced Structural Transformation in Ni(OH)2/Ti3C2Tx/NF Systems with Enhanced Electrochemical Performance for Hybrid Supercapacitors

The preparation of liquefied bio-stalk carbon nanofibers and their application in supercapacitors

Three dimensional few layer graphene and carbon nanotube foam architectures for high fidelity supercapacitors

N-doped carbon foam constructed by liquid foam with hierarchical porous structure for supercapacitor

N-Doped Carbon Knotting Carbon Nanotube Sponge Networks for Lithium-Ion Capacitor Anodes

Atomic layer deposition-induced integration of N-doped carbon particles on carbon foam for flexible supercapacitor

Rational Design of Porous Nanowall Arrays of Ultrafine Co4N Nanoparticles Confined in a La2O2CN2 Matrix on Carbon Cloth for a High-Performing Supercapacitor Electrode

Synthesis of Multiporous Carbon Nanofibers and Their Application in Supercapacitors