Abstract:The phenomenon of vibration is quite frequent in various engineering works. Vibration analysis and monitoring occupy a significant place in scientific measurements and engineering applications. The quality of the underline structure actively influences the response of high-speed railway track plate and trackside. Due to years of service and under the action of train loads, bond failure between supporting track plate and cement asphalt mortar layer will imminently occur. And this will significantly influence the vertical dynamic response of a track slab and severely affect the safe operation of the entire railway system which can subsequently lead to a risk of derailment. Firstly, the purpose of the present study is to develop a practical 2D dynamic interaction model of vehicle-track subgrade based on a two-step simulation capable of analyzing the dynamic response of a track slab under different fault distribution in the CA mortar layer by using the commercial software Abaqus. Secondly, the distributed optical vibration sensing (DOVS) technology is discussed and applied on a section of high-speed railway near the Hongqiao station which has been in operation after a long period of degradation for real-time vibration monitoring. Overall, the numerical simulation results show that, in the elastic field, the track plate defects have a significant amplification effect on the vibration, and the magnification can be more than 2 to 3 times. The vibration monitoring results reveal two elements of the fault effects on the track slab dynamic response: the amplification of the dynamic response when the train is arriving and leaving the monitoring section and also causing extreme resonance when the train is passing increasing the vibration signal largely.

Wheel Vibration Estimation of Railway Vehicle Utilizing State Observer

Estimation of wheel–rail structural interactions from motion signals of high-speed train bogie

State Observers for Suspension Systems with Interacting Multiple Model Unscented Kalman Filter Subject to Markovian Switching

Identification of track irregularities with the multi-sensor acceleration measurements of vehicle dynamic responses

An approach for the estimation of vertical wheel/rail force using dynamic signals

State Estimation for 4WD Vehicle Based on Information of Tyre Force Sensor

Real-time road condition estimation for four-wheel-drive vehicle

In-Wheel Motor Electric Vehicle State Estimation By Using Unscented Particle Filter

Non-Linear Observer For Slip Parameter Estimation Of Unmanned Wheeled Robots

Quantitative Detection of Vertical Track Irregularities under Non-Stationary Conditions with Variable Vehicle Speed

In-Service Detection and Quantification of Railway Wheel Flat by the Reflective Optical Position Sensor

State Estimation for 4WD In-Wheel Motor Electric Vehicle

Rail CM: Lateral Contact Forces Estimation of Locomotive Wheelsets Using a Model-Based Filter for Condition Monitoring

Track Irregularities Estimation Based on the Vibration of Car-Body

An on-board detection framework for polygon wear of railway wheel based on vibration acceleration of axle-box

Vehicle State And Friction Force Estimation Using Nonlinear Observer Strategies

Study of a Space-Time Monitoring of High-Speed Railway Underline Structure Using Distributed Optical Vibration Sensing Technology

Real Time Estimation Algorithm For 4 Wheel Independent Driven Vehicle'S Velocity

Fault Diagnosis in a Momentum Wheel System Based on Unknown Input Observer

Research on Numerical Simulation Method of Nonstationary Random Vibration Signal Sensor in Railway Transportation

Design Method of Sliding Model Observer for Vehicle State