Abstract:By combining inorganic hydrated salt phase change materials (PCMs) with traditional building materials, new multifunctional building materials are prepared, which can achieve energy optimization of building envelope structures and improve indoor thermal comfort. This study chose disodium hydrogen phosphate dodecahydrate (DHPD) as PCM and 4 % Na 2 SiO 3 ·9H 2 O as the nucleating agent to prepare a modified PCM with extremely low supercooling degree (0.3 °C). Then, the modified PCM was introduced into 45 % diatomite to gain a composite PCM (CPCM) with a melting temperature of 30.4 °C, a melting enthalpy of 130.1 J/g, and a thermal conductivity of 0.24 W m −1 K −1 by melt mixing method, being suitable for building insulation. The corrosion test of steel bar showed the introduction of diatomite can solve the corrosion problem of reinforcing steel bar by DHPD. The results of SEM, pore structure analysis, FT-IR and XRD illustrated that the pores and disc surfaces of diatomite were almost covered by the modified PCM, and that were combination between the diatomite and PCM was a physical interaction. After 200 cold-heating cycles, the melting temperature change of the CPCM was less than 3 % with the loss of melting enthalpy of only 4.7 %, indicating its good thermal stability. In addition, the CPCM was filled into polycarbonate hollow panels to produce PCM board, and its temperature regulation performance was evaluated through two experimental rooms. The results showed that the thermal comfort time of the room equipped with PCM board accounted for 47.46 %, which was 40.09 % higher than that of (7.37 %) the one without PCM board, presenting a better building energy-saving effect. Therefore, the prepared CPCM has broad application prospect in the building energy conservation.

Preparation and Properties of Phase Change Ceramisite Loaded with Inorganic Salt Hydrate

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Cement-based materials incorporated with polyethylene glycol/sepiolite composite phase change materials: hydration, mechanical, and thermal properties

CH3COONa·3H2O/flaky modified vermiculite composite phase change materials enhanced phase change behavior and thermal storage through curing lotus root starch modification

Preparation and Properties of Na2HPO4∙12H2O/Silica Aerogel Composite Phase Change Materials for Building Energy Conservation

Preparation and properties of CaCl2·6H2O/silica aerogel composite phase change material for building energy conservation

Preparation and Characteristics of Composite Phase Change Material (CPCM) with SiO2 and Diatomite As Endothermal-Hydroscopic Material

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Phase Compositions and Pore Structure of Phosphate Modified Calcium Aluminate Cement Hardened Pastes with Varied Dosages of Sodium Polyphosphate

Design of Na2HPO4·12H2O/diatomite composite phase change materials with low supercooling degree, excellent thermal properties and corrosion resistance for building energy conservation

Preparation and characterization of an aluminum ammonium sulfate dodecahydrate-based composite phase change material with low supercooling and high thermal conductivity

Preparation and Characteristics of Na2HPO4·12H2O-K2HPO4·3H2O/SiO2 Composite Phase Change Materials for Thermal Energy Storage

Surface evolution of eutectic MgCl2·6H2O-Mg(NO3)2·6H2O phase change materials for thermal energy storage monitored by scanning probe microscopy

Preparation and Hygrothermal Properties of Composite Phase Change Humidity Control Materials

Preparation of energy storage materials working at 20–25 °C as a cold source for long-term stable operation

Calcium chloride hexahydrate based supercooling phase change material for a long-term recovery of low-grade thermal energy

Synthesis and Characterization of Composite Phase Change Material (CPCM) with SiO2 and Diatomite as Endothermal-hygroscopic Material

Preparation and assessment of paraffin/SiO2composite phase change material based on the efficacy coefficient method

Characterization of novel lamellar porous Ti 3 SiC 2 as shape-stabilized high-temperature phase change materials composites for durable enhancement thermal storage properties

Preparation and Heat-Moisture Properties of Phase Change Hygroscopic Materials

Thermal Performance of Lauric Acid/Bentonite/Carbon Nanofiber Composite Phase-Change Materials for Heat Storage