Abstract:In order to realize the efficient and stable operation of the solid oxide fuel cell (SOFC)-combined heat and power (CHP) system in the typical applied scenario, three different energy management schemes are proposed in this study. First, a coupled calculation model of the solid oxide fuel cell-gas turbine-combined heat and power (SOFC-GT-CHP) system with a rated power of 30 kW for the SOFC stack is constructed. The inlet temperature and inlet pressure of the SOFC stack are optimized. The recommended design for the proposed system is thence obtained. Second, three operation schemes of SOFC-GT-CHP are proposed. They consist of the operation scheme of single-stack, multi-stack and optimal operation scheme coupled with vanadium redox flow battery (VRB). Finally, four types of typical applied scenarios in North China are selected. The real-time performance of the SOFC-GT-CHP system when applying three different operation schemes is obtained and comparatively analyzed. The results are presented as follows. First, the SOFC-GT-CHP system achieves a rated power of 44.50 kW and a rated system efficiency of 47.20% when the inlet temperature and pressure of the stack are preferably 505°C and 709.1 kPa. Second, the application of the multi-stack SOFC-GT-CHP system has the advantage of high efficiency in the low-load operation domain. With a net output power at 20 kW, the time average efficiency of SOFC-GT-CHP is increased from 38.37% to 46.96%. Finally, the SOFC-GT-CHP system achieves the highest time average generation efficiency of 46.13% in the hotel applied scenario when applying the optimal operation scheme coupled with VRB. This meets the practical operation requirement of the SOFC stack. The reduction of the net output power range of SOFC-GT-CHP is 67.87%. It shows that the optimal operation scheme is efficient and stable. The study can provide a reference for the energy management of the SOFC-GT-CHP system in typical applied scenarios.

Comparative Study of Solid Oxide Fuel Cell Combined Heat and Power System with Multi-Stage Exhaust Chemical Energy Recycling: Modeling, Experiment and Optimization

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

Optimization of Anode Off-Gas Recycle Ratio for a Natural Gas-Fueled 1 Kw SOFC CHP System

Performance evaluation of a solid oxide fuel cell multi-stack combined heat and power system with two power distribution strategies

System Simulation and Parametric Analysis of Low-Concentration Coal Mine Gas Fed SOFC-CHP with Deoxygenation and Enrichment Pretreatment

Experimental study on reactor integrating catalytic combustion and steam reforming for 1 kW SOFC-CHP

Thermodynamic assessment of a system configuration strategy for a cogeneration system combining SOFC, thermoelectric generator, and absorption heat pump

Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC

Numerical Modeling of a Cogeneration System Based on a Direct Carbon Solid Oxide Fuel Cell and a Thermophotovoltaic Cell

Thermodynamic analysis of a novel combined heating and power system based on low temperature solid oxide fuel cell (LT-SOFC) and high temperature proton exchange membrane fuel cell (HT-PEMFC)

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process

Novel SOFC system concept with anode off-gas dual recirculation: A pathway to zero carbon emission and high energy efficiency

Optimal Energy Management Based on Real-Time Performance Analysis for the Solid Oxide Fuel Cell-Combined Heat and Power System

Energy, exergy, exergoeconomic, environmental (4E) evaluation and multi-objective optimization of a novel SOFC-ICE-SCO 2 -HRSG hybrid system for power and heat generation

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization

Employing a Booster/ejector-Assisted Organic Flash Cycle to Heat Recovery of SOFC System; Exergy- and Economic-Based Optimization

Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Thermodynamic Analysis of a New Combined Cooling, Heat and Power System Driven by Solid Oxide Fuel Cell Based on Ammonia–water Mixture