Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

A micro contact model for electrical contact resistance prediction between roughness surface and carbon fiber paper

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

An Analytical Model for Pressure Distribution in Automated Fiber Placement on Irregular Surfaces and Its Application in Aeronautical Manufacturing

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Micro contact modeling of electrical current conduction behavior between carbon fiber yarns

On the multi-physics elastoplastic electrical contact of rough surfaces

Mesoscopic modeling of mechanical erosion for the ablation-erosion behavior of 3D C/C composites

Modeling of contact mechanics and defects investigation in automated fiber placement

A Novel Fractal Model for Contact Resistance Based on Axisymmetric Sinusoidal Asperity

Multiscale simulation of thermal contact resistance in electronic packaging

A Novel Micro-Contact Stiffness Model for the Grinding Surfaces of Steel Materials Based on Cosine Curve-Shaped Asperities

Modeling multi-physics electrical contact on rough surfaces considering elastic-plastic deformation

Numerical model of unidirectional CFRP in machining: Development of an amended friction model

Modeling Contact of Rough Surfaces with Bearing Ratio Curves

Modeling of the effective permittivity of insulating presspaper

Numerical Study of Coupled Electrical-Thermal-Mechanical-Wear Behavior in Electrical Contacts

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Volumetric contact theory to electrical contact between random rough surfaces

An efficient method for electro-thermo-mechanical coupling effect in electrical contact on rough surfaces

A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue