Abstract:The vector sum method (VSM) based on real stress state has been applied recently for analysing the slope stability, considering its clear physical meaning. However, the factor of safety (FoS) defmed by VSM could be negative in the case where total normal force vector projection is negative, and its absolute value is larger than total shear force vector projection. Moreover, deduced by Pan's Principle, the direction of shear resistance stress vector of every point on potential slip surface is currently defmed to be opposite to that of the projection of the potential slip direction of the possible slip mass on the tangential surface through this point. However, according to the definition of VSM safety factor and Pan's Principle, the direction of the projection of the potential slip direction on the tangential surface through this point is opposite to that of the total resistance stresses including shear and normal ones. In this study, a vector-sum-based slip surface stress method for analysing slip mass stability was proposed to overcome these two disadvantages above of VSM. The slip surface was treated as a thin slip band, and forces undertaken by an arbitrary element of the slip band was analysed. The direction of the limit resisting shear stress of an arbitrary element was defined as the opposite direction of the real shear stress, and the possible slip direction was defmed as the opposite direction of the resultant limit resisting shear force. Finally, FoS was defmed as the ratio of the projection of the limit resisting shear force vector sum in the opposite possible slip direction to that of real dynamic shear force vector sum in the possible slip direction. Compared with the limit equilibrium method, the proposed method satisfied the force and moment equilibrium equations and compatibility conditions without any assumption. Compared with the shear strength reduction method, the proposed method defmed that the FoS was explicit form avoiding iteration. The classic two-dimension static slope case was used to verify the proposed method with comparisons among main methods for slope stability analysis, which indicated that the proposed method was feasible. Additionally, the proposed method was applied to a three-dimensional engineering case to study its stability during the excavation process, which showed the proposed method could be used for practical application.

Three-dimensional Slope Stability Analysis Using Independent Cover Based Numerical Manifold and Vector Method

Assessing Slope Stability with an Improved 3D Numerical Manifold Method

Limit equilibrium analysis method based on vector sum method for 3D slope

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Dynamic stability analysis of soil slopes based on numerical manifold method

A LIMIT EQUILIBRIUM METHOD BASED ON MORGENSTERN-PRICE METHOD FOR 3D SLOPE STABILITY ANALYSIS

Unified Continuum/discontinuum Modeling Framework for Slope Stability Assessment

Numerical Implementation of Three-Dimensional Nonlinear Strength Model of Soil and Its Application in Slope Stability Analysis

Appraisal and Analysis of Three-Dimensional Slope Stability Based on Elastoplastic FEM

3D slope reliability analysis based on the intelligent response surface methodology

3D slope stability analysis with kinematical element technique

Numerical Modeling of 3D Slopes with Weak Zones by Random Field and Finite Elements

Simulation Analysis on Three-Dimensional Slope Failure under Different Conditions

Vector-sum-based slip surface stress method for analysing slip mass stability

Searching slope critical slip surface based on the NMM and equivalent plastic strain

Three-Dimensional Stability Analysis Of Slope With Weak Interlayer

LEM for Stability Analysis of 3D Slopes with General-Shaped Slip Surfaces

A GIS-based 3D slope stability analysis method based on the assumed normal stress on the slip surface

Three-dimensional method for slope stability with the curvilinear route of the main sliding

Stability of Slope with the Weak Structural Plane Based on 2-D Nonlinear Finite Element Method

Three Problems in Slope Stability Analyses with Finite Element Method