Abstract:Single cell trapping increasingly serves as a key manipulation technique in single cell analysis for many cutting-edge cell studies. Due to their inherent advantages, microfluidic devices have been widely used to enable single cell immobilization. To further improve the single cell trapping efficiency, this paper reports on a passive hydrodynamic microfluidic device based on the "least flow resistance path" principle with geometry optimized in line with corresponding cell types. Different from serpentine structure, the core trapping structure of the micro-device consists of a series of concatenated T and inverse T junction pairs which function as bypassing channels and trapping constrictions. This new device enhances the single cell trapping efficiency from three aspects: (1) there is no need to deploy very long or complicated channels to adjust flow resistance, thus saving space for each trapping unit; (2) the trapping works in a "deterministic" manner, thus saving a great deal of cell samples; and (3) the compact configuration allows shorter flowing path of cells in multiple channels, thus increasing the speed and throughput of cell trapping. The mathematical model of the design was proposed and optimization of associated key geometric parameters was conducted based on computational fluid dynamics (CFD) simulation. As a proof demonstration, two types of PDMS microfluidic devices were fabricated to trap HeLa and HEK-293T cells with relatively significant differences in cell sizes. Experimental results showed 100% cell trapping and 90% single cell trapping over 4 x 100 trap sites for these two cell types, respectively. The space saving is estimated to be 2-fold and the cell trapping speed enhancement to be 3-fold compared to previously reported devices. This device can be used for trapping various types of cells and expanded to trap cells in the order of tens of thousands on 1-cm(2) scale area, as a promising tool to pattern large-scale single cells on specific substrates and facilitate on-chip cellular assay at the single cell level. (C) 2015 AIP Publishing LLC.

A novel biomems device for efficient on-chip single cell loading and 3D rotation

Study of a Microfluidic Chip Integrating Single Cell Trap and 3D Stable Rotation Manipulation.

Towards on-chip single cell manipulation of trap and rotation

Flexible Trapping and Manipulation of Single Cells on a Chip by Modulating Phases and Amplitudes of Electrical Signals Applied Onto Microelectrodes.

3D cell electrorotation and imaging for measuring multiple cellular biophysical properties.

Versatile Microfluidic Platform Embedded with Sidewall Three-Dimensional Electrodes for Cell Manipulation

Trapping and Manipulation of Bioparticles by a 3-D Optimal Multiple-Designed Offset Carbon-Microelectrode Array in C-MEMS Fabrication

A Microfluidic Chip for Single-Cell 3D Rotation Enabling Self-Adaptive Spatial Localization

On-chip dielectrophoretic single-cell manipulation

Trapping of a Single Microparticle using AC Dielectrophoresis Forces in a Microfluidic Chip

On‐chip technology for single‐cell arraying, electrorotation‐based analysis and selective release

Multiplexing Microelectrodes for Dielectrophoretic Manipulation and Electrical Impedance Measurement of Single Particles and Cells in a Microfluidic Device

A microfluidic device enabling high-efficiency single cell trapping.

A Self-Digitization Dielectrophoretic (SD-DEP) Chip for High-Efficiency Single-Cell Capture, On-Demand Compartmentalization, and Downstream Nucleic Acid Analysis

On-Chip Cell-Cell Interaction Monitoring at Single-Cell Level by Efficient Immobilization of Multiple Cells in Adjustable Quantities

A Mechanically Tunable Microfluidic Cell-Trapping Device.

On-chip multiplexed single-cell patterning and controllable intracellular delivery

An integrated micro-chip for cell array positioning, in-situ impedance measurement and electroperation

Single-cell 3D electro-rotation.

Integrated Cell Manipulation Systems

3D Electro-Rotation of Single Cells