Pt Quantum Dots Deposited on N-Doped (bio)(2)co3: Enhanced Visible Light Photocatalytic No Removal and Reaction Pathway

Xing'an Dong

DOI: https://doi.org/10.1039/c6cy02444k

IF: 6.177

2017-01-01

Catalysis Science & Technology

Abstract:The reaction pathway for visible light photocatalytic NO removal with Pt quantum dots/N-doped (BiO)2CO3 was revealed with in situ FT-IR and ESR spectroscopy.

What problem does this paper attempt to address?

Pt quantum dots deposited on N-doped (BiO)2CO3: enhanced visible light photocatalytic NO removal and reaction pathway

Xing'an Dong,Wendong Zhang,Wen Cui,Yanjuan Sun,Hongwei Huang,Zhongbiao Wu,Fan Dong

DOI: https://doi.org/10.1039/c6cy02444k

2017-01-01

Abstract:The reaction pathway for visible light photocatalytic NO removal with Pt quantum dots/N-doped (BiO)2CO3 was revealed with in situ FT-IR and ESR spectroscopy.
Carbonate doped Bi2MoO6 hierarchical nanostructure with enhanced transformation of active radicals for efficient photocatalytic removal of NO

Wangchen Huo,Weina Xu,Tong Cao,Ziyang Guo,Xiaoying Liu,Guangxu Ge,Nan Li,Tian Lan,Hong-Chang Yao,Yuxin Zhang,Fan Dong

DOI: https://doi.org/10.1016/j.jcis.2019.09.089

2019-12-01

Abstract:Doping heteroatoms in photocatalyst is an effective strategy to signally enhance the photocatalytic activity. Herein, we have favorably fabricated the carbonate doped Bi2MoO6 via a facile one-pot solvothermal method, which was verified by structure and constituent characterization analysis. In addition, the NO removal efficiency of carbonate-intercalated Bi2MoO6 is ~34%, far-exceeding that of the pure Bi2MoO6 (~13%), whilst exhibits a good stability and durability, owing to that the dopants could modulate the electron states of the Bi2MoO6, thus stimulating charge separation and migration, incenting transformation of reactive oxygen species and facilitating reactants activation, which are synthetically investigated by experimental characterization coupled with DFT calculation. Significantly, the in situ DRIFTS measurement was employed to dynamic monitor the NO oxidation process and clarify the photocatalytic mechanism under visible light irradiation. This work provides an efficient strategy to design photocatalysts with tunable motivating charge conversion and reactants activation towards NO photooxidation.
Novel Dual Z-scheme Bi/BiOI-Bi2O3-C3N4 Heterojunctions with Synergistic Boosted Photocatalytic Degradation of Phenol

Qi Wang,Ningyi Li,Meng Tan,Man Deng,Guoxiang Yang,Qiang Li,Hao Du

DOI: https://doi.org/10.1016/j.seppur.2022.122733

IF: 8.6

2022-01-01

Separation and Purification Technology

Abstract:Photocatalysis is an emerging technique for the remediation of refractory organic contaminants. Herein, a novel dual Z-scheme Bi/BiOI-Bi2O3-C3N4 heterojunctions were constructed through a calcining process following with I- etching and UV-reduction processes. Various analytical technologies were adopted to characterize the materials. As a result, the Bi-0 decorated composite presented improved visible-light-response and rapid charge transfer. Due to the synergy of Bi-0 and dual Z-scheme heterostructures, a remarkable photocatalytic performance toward phenol degradation was achieved with the highest degradation efficiency of 93.2% and rate constant of 0.0161 min(-1) over the optimal composite within 75 min of visible light irradiation. Interestingly, the concen-tration of the yielded benzoquinone considerably decreased with the introduction of C3N4. Trapping experiments and electron spin resonance (ESR) tests indicated that h(+), O-2(center dot-), (OH)-O-center dot and e(-) contributed to phenol remediation, and h(+) and O-2(center dot-) were the crucial species toward phenol degradation. Furthermore, outstanding stability was obtained only with a decline of 3.8% after 4 cycles. A reasonable charge transfer mechanism was also proposed. This work provides a new route for in situ construction of Bi-0 decorated dual Z-scheme heterojunction for phenolic compounds degradation.
Controlled synthesis and excellent visible light photocatalytic performance of in situ N-doped (BiO)2CO3 hierarchical microspheres self-assembled by nanosheets

Fan Dong,Haitao Liu,Min Fu,Haidong Zhang,Yanke Jiang,Ji Bian,Zhongbiao Wu

2013-01-01

Abstract:In situ N-doped (BiO)2CO3 hierarchical microspheres were fabricated by a one-pot hydrothermal method using dicyandiamide and bismuth citrate as raw materials. The as-prepared samples were characterized by XRD, SEM, FT-IR, UV-vis DRS and PL. The results indicated that the addition of dicyandiamide has significant impact on morphological structure, band gap and electronic-hole recombination rate of the as-prepared (BiO)2CO3. During the hydrothermal process, bismuth citrate were hydrolyzed by dicyandiamide, and N atoms were in situ doped into the (BiO)2CO3 lattice. N doping made the light response spectra of (BiO)2CO3 extend into visible light region significantly. The band gap narrowing of (BiO)2CO3 due to N doping was evidenced by valence band XPS. The in situ N-doped (BiO)2CO3 hierarchical microspheres structure showed excellent visible light photocatalytic activity toward aqueous Rh B and gas-phase NO degradation, which was higher than N-doped TiO2 and C-doped TiO2. The present investigation has significant implication on extending the effect of N doping into non-TiO2 system.
Palladium Nanoparticles Embedded Nutshell-like Bi 2 WO 6 as an Efficient and Stable Visible-Light-Responsive Photocatalysts for NO Removal

Wei Zhang,Jie Zhao,Ahmed A. Allam,Yue Xin,Jingqi Lin,Ting Gao,Jamaan S. Ajarem,Ximing Li,Chuanyi Wang,Detlef W. Bahnemann

DOI: https://doi.org/10.1021/acs.energyfuels.2c02542

IF: 4.6541

2022-10-31

Energy & Fuels

Abstract:Bi2WO6 is a promising photocatalyst for NO x removal, owing to its wide solar light absorption and specific photoelectric properties. Nevertheless, enhancing its efficiency remains a major concern. Palladium proves to be a good co-catalyst for semiconductor materials, but how the combination of Pd and bismuth tungstate affects the efficiency of NO removal and relevant process is still vague. In this work, nutshell-like bismuth tungstate was synthesized using a hydrothermal method, followed by photo-depositing Pd nanoparticles with different contents. The obtained photocatalysts were characterized by X-ray diffraction, specific surface area analyzer (BET), X-ray photoelectron spectroscopy, and scanning electron microscopy. Among the prepared photocatalysts, Bi2WO6 deposited with 1 wt % Pd shows the best photocatalytic activity with a NO removal efficiency of 58%, which is 2.9 times that of the Bi2WO6 under the same conditions. The enhanced photocatalytic activities were attributed to the comprehensive effects of the high efficiency in separating electrons and holes, improvement in invisible light utilization and BET specific surface areas of Pd–Bi2WO6 nanocomposites. More importantly, it was found that NO2 is the main product over Bi2WO6, whereas the conversion of NO to NO3 – (an environmentally friendly product) is dominant over Pd-modified Bi2WO6 due to the enhanced separation of electrons and holes. Active species capture experiments show that photo-generated holes (h+) and •O2 – play an important role in NO removal. The present work provides new insights into the role of Pd cocatalysts in NO removal.

energy & fuels,engineering, chemical
Enhancing visible-light-driven photocatalytic degradation of nitric oxide with lignite-derived graphene quantum dots/BiOBr heterojunctions

Qianqian Nie,Liuhu Jia,Yunpei Cui,Jianfu Luan,Zhongchao Tan,Hesheng Yu

DOI: https://doi.org/10.1016/j.seppur.2024.127118

IF: 8.6

2024-03-19

Separation and Purification Technology

Abstract:In this work, lignite was used to prepare value-added graphene quantum dots (L-GQDs) via the chemical oxidation process. The prepared L-GQDs were then hybridized with bismuth oxybromide (BiOBr) to form composite photocatalysts by a semi-solvothermal method. The composites catalytically degraded NO under visible-light irradiation. Multiple characterizations demonstrated that L-GQDs were successfully deposited onto BiOBr without changing the valence states of the elements in BiOBr. The addition of L-GQDs not only boosted the NO removal efficiency from 48.44% to 80.17%, but also significantly improved the environmental friendliness of the catalyst. Experimental investigations and theoretical calculations confirmed the formation of a type II heterojunction between L-GQDs and BiOBr. Such a heterojunction facilitated the separation of photogenerated electrons and holes, thus enhancing the photocatalytic activity. Furthermore, the prepared composite catalyst demonstrated good stability, maintaining 94.40% of its original photocatalytic activity after five cycles. The synthesis and environmentally conscious application of the value-added L-GQDs in this work provides a cleaner alternative for utilizing low-rank coals.

engineering, chemical
Ti3C2@TiO2/g-C3N4 heterojunction photocatalyst with improved charge transfer for enhancing visible-light NO selective removal

Xingmao Zhang,Junli Nie,Fei Rao,Hongxia Liu,Yijin Wang,Danyao Qu,Weiwei Wu,Peng Zhong,Gangqiang Zhu

DOI: https://doi.org/10.1016/j.ceramint.2021.08.003

IF: 5.532

2021-11-01

Ceramics International

Abstract:Control of Nitrogen dioxide (NO2) byproducts is of great importance for the photocatalytic NO removal and environmental remedy. However, individual semiconductor photocatalysts generally show limited capabilities for selective NO removal due to severe charge recombination and inadequate redox potentials. Herein, the cotton-like g-C3N4 was modified with Ti3C2@TiO2 to construct a heterojunction photocatalyst Ti3C2@TiO2/g-C3N4, which showed outperformed photocatalytic NO removal and MB degradation abilities compared to the individual photocatalysts under visible light irradiation. The UV–vis absorption spectra and photoluminescence (PL) spectra confirmed that Ti3C2@TiO2/g-C3N4 photocatalyst was endowed with superior light utilization and separation/transfer ability of charge carriers due to the presence of n-n heterojunction and Schottky barrier. Furthermore, the g-C3N4, Ti3C2, and TiO2 were closely contacted showing a high specific surface area, which promoted the charge transfer and the exposure of more active sites, further inducing the formation of more active species. Therefore, the designed photocatalyst delivered a high removal rate of NO and a suppressed discharge of NO2. Notably, the photocatalyst Ti3C2@TiO2/g-C3N4 also presented superior NO removal ability during the cycling experiment, indicating their outstanding stability and recyclability. Besides, the effects of active species were monitored using a trapping experiment to propose probable photocatalytic mechanism. This study could shed a new light to the design of photocatalyst for air purification in the future.

materials science, ceramics
Mechanisms of Interfacial Charge Transfer and Photocatalytic NO Oxidation on BiOBr/SnO2 p-n Heterojunctions

Huizhong Wu,Chaowei Yuan,Ruimin Chen,Jiadong Wang,Fan Dong,Jieyuan Li,Yanjuan Sun

DOI: https://doi.org/10.1021/acsami.0c12628

2020-09-30

Abstract:In this work, hydrothermally prepared p-n heterojunction BiOBr/SnO2 photocatalysts were applied to eliminate NO in visible light. The as-synthesized BiOBr/SnO2 photocatalysts exhibit superior photocatalytic activity and stability through the establishment of a p-n heterojunction, resulting in a significant improvement in charge separation and transfer properties. The morphological structure and optical property of the BiOBr/SnO2 heterojunction were also investigated comprehensively. Extended light absorption into the visible range was achieved by SnO2 coating on the surface of the BiOBr microsphere through the constructed heterojunction between BiOBr and SnO2, thus achieving efficient NO removal. Moreover, the transfer channels and directions of charge at the BiOBr/SnO2 interface were determined by a combination of theoretical calculations and experimental studies. Within this p-n heterojunction, the charge in SnO2 migrates into BiOBr through the preformed electron transfer channels, thus generating an internal electric field (IEF) between SnO2 and BiOBr. Under the influence of IEF, the photogenerated electrons of BiOBr migrate from the conduction band (CB) to the CB of SnO2, thus promoting the separation of electrons (e-)-holes (h+) pairs. The intermediates and final products were monitored by the in situ DRIFTS technology in the process of removal of NO in visible light; hence, the oxidation pathways of NO were reasonably proposed. Meanwhile, the construction of the heterojunction not only achieves more efficient NO photocatalytic oxidation but also inhibits the production of more toxic NO2. This work provides mechanistic insights into the interfacial charge transfer for heterojunction photocatalysts and reaction mechanism for efficient air purification.
Coral-Shaped TiO 2−δ Decorated with Carbon Quantum Dots and Carbon Nanotubes for NO Removal

Yucheng Ou,Gangqiang Zhu,Fei Rao,Jianzhi Gao,Jun Chang,Xiaotao Xie,Weibin Zhang,Yu Huang,Mirabbos Hojamberdiev

DOI: https://doi.org/10.1021/acsanm.1c01306

IF: 6.14

2021-06-29

ACS Applied Nano Materials

Abstract:Coral-like TiO2−δ microstructures with high surface area were synthesized by a simple hydrothermal method, followed by thermal treatment in a N2 atmosphere. The introduction of oxygen vacancies (OVs) to TiO2 significantly improved light absorption and inhibited the recombination of photogenerated charge carriers. Then, multiwalled carbon nanotubes (CNTs) and N-doped carbon quantum dots (N-CQDs) were decorated on the surface of coral-like TiO2−δ microstructures. The CNTs could greatly improve the separation and transfer efficiency of photogenerated charge carriers, while the N-CQDs could further extend light absorption to longer wavelengths, including the IR region. According to the results of electron spin resonance (ESR) spectroscopy, the introduction of OVs to TiO2−δ and surface modification with CNTs and N-CQDs promoted the generation of •O2– and •OH active species. The formation of •O2– and •OH active species on the surface of TiO2−δ/CNTs/N-CQDs played an important role in the deep oxidation and selective conversion of NO into nitrate. Density functional theory calculations revealed the adsorption and reaction sites for H2O and O2 separately in space over the surface of TiO2−δ/CNTs/N-CQDs. Namely, the reaction sites of H2O and O2 are on the surface of TiO2−δ and CNTs, respectively. The electron transfer from TiO2−δ to CNTs was further verified through the differential charge density. This study demonstrates a straightforward approach for designing full-spectrum-responsive photocatalysts with high efficiency, stability, and selectivity for NO removal.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c01306?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c01306</a>.Synthetic methods of TiO2, CNTs, and N-CQDs, photocatalytic NO removal experiments and DFT calculations, XRD pattern and Raman spectrum of CNTs, XPS spectrum of CNT, SEM images of TiO2, TiO2−δ/CNTs, TiO2−δ/N-CQDs, and TiO2−δ/CNTs/N-CQDs, TEM and HRTEM images of CNTs, N2 adsorption–desorption isotherms and corresponding pore-size distribution curves of TiO2, TiO2−δ/N-CQDs, and TiO2−δ/CNTs/N-CQDs, forbidden gaps of TiO2 and TiO2−δ, nitrogen species after 30 min of visible-light irradiation and pseudo-first-order kinetic constants for photocatalytic NO removal of the samples, calculated electrostatic potentials of TiO2−δ (a) and CNTs (b) and interface band bending diagram and interfacial electron transfer between TiO2−δ and CNTs, H2O adsorption of TiO2−δ and TiO2, photocatalytic NO removal efficiency in the presence of various scavengers, and relative contents of the Ti4+, Ti3+, and oxygen species of the samples (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c01306/suppl_file/an1c01306_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
S-scheme Sb2WO6/g-C3N4 photocatalysts with enhanced visible-light-induced photocatalytic NO oxidation performance

Yuyu Ren,Yuan Li,Xiaoyong Wu,Jinlong Wang,Gaoke Zhang

DOI: https://doi.org/10.1016/s1872-2067(20)63631-2

IF: 16.5

2021-01-01

Chinese Journal of Catalysis

Abstract:Normal photocatalysts cannot effectively remove low-concentration NO because of the high recombination rate of the photogenerated carriers. To overcome this problem, S-scheme composites have been developed to fabricate photocatalysts. Herein, a novel S-scheme Sb2WO6/g-C3N4 nanocomposite was fabricated by an ultrasound-assisted method, which exhibited excellent performance for photocatalytic ppb-level NO removal. Compared with the pure constituents of the nanocomposite, the as-prepared 15%-Sb2WO6/g-C3N4 photocatalyst could remove more than 68% continuous-flowing NO (initial concentration: 400 ppb) under visible-light irradiation in 30 min. The findings of the trapping experiments confirmed that •O2 − and h+ were the important active species in the NO oxidation reaction. Meanwhile, the transient photocurrent response and PL spectroscopy analyses proved that the unique S-scheme structure of the samples could enhance the charge separation efficiency. In situ DRIFTS revealed that the photocatalytic reaction pathway of NO removal over the Sb2WO6/g-C3N4 nanocomposite occurred via an oxygen-induced route. The present work proposes a new concept for fabricating efficient photocatalysts for photocatalytic ppb-level NO oxidation and provides deeper insights into the mechanism of photocatalytic NO oxidation.

chemistry, physical,engineering, chemical, applied
Characterization and activity of Pd-modified TiO2 catalysts for photocatalytic oxidation of NO in gas phase.

Zhongbiao Wu,Zhongyi Sheng,Yue Liu,Haiqiang Wang,Nian Tang,Jie Wang

DOI: https://doi.org/10.1016/j.jhazmat.2008.08.028

IF: 13.6

2009-01-01

Journal of Hazardous Materials

Abstract:Pd-modified TiO2 prepared by thermal impregnation method was used in this study for photocatalytic oxidation of NO in gas phase. The physico-chemical properties of Pd/TiO2 catalysts were characterized by X-ray diffraction analysis (XRD), Brunauer-Emmett-Teller measurements (BET), X-ray photoelectron spectrum analysis (XPS), transmission electron microscopy (TEM), high resolution-transmission electron microscopy (HR-TEM), UV–vis diffuse reflectance spectra (UV–vis DRS) and photoluminescence spectra (PL). It was found that Pd dopant existed as PdO particles in as-prepared photocatalysts. The results of PL spectra indicated that the photogenerated electrons and holes were efficiently separated after Pd doping. During in situ XPS study, it was found that the content of hydroxyl groups on the surface of Pd/TiO2 increased when the catalyst was irradiated by UV light, which could result in the improvement of photocatalytic activity. The activity test showed that the optimum Pd dopant content was 0.05wt.%. And the maximum conversion of NO was about 72% higher than that of P25 when the initial concentration of NO was 200ppm, which showed that Pd/TiO2 photocatalysts could be potentially applied to oxidize higher concentration of NO.
Novel in Situ N-Doped (bio)2co3 Hierarchical Microspheres Self-Assembled by Nanosheets As Efficient and Durable Visible Light Driven Photocatalyst

Fan Dong,Yanjuan Sun,Min Fu,Wing-Kei Ho,Shun Cheng Lee,Zhongbiao Wu

DOI: https://doi.org/10.1021/la202752q

IF: 3.9

2011-01-01

Langmuir

Abstract:Novel N-doped (BiO)(2)CO3 hierarchical microspheres (N-BOC) were fabricated by a facile one-pot template free method on the basis of hydrothermal treatment of bismuth citrate and urea in water for the first time. The N-BOC sample was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, scanning electron microscopy, transmission electron microscopy, N-2 adsorption-desorption isotherms, and Fourier transform-infrared spectroscopy. The N-BOC was constructed by the self-assembly of single-crystalline nanosheets. The aggregation of nanosheets led to the formation of hierarchical framework with mesopores, which is favorable for efficient transport of reaction molecules and harvesting of photoenergy. Due to the in situ doped nitrogen substituting for oxygen in the lattice of (BiO)(2)CO3, the band gap of N-BOC was reduced from 3.4 to 2.5 eV, making N-BOC visible light active. The N-BOC exhibited not only excellent visible light photocatalytic activity, but also high photochemical stability and durability during repeated and long-term photocatalytic removal of NO in air due to the special hierarchical structure. This work demonstrates that the facile fabrication method for N-BOC combined with the associated outstanding visible light photocatalytic performance could provide new insights into the morphology-controlled fabrication of nanostructured photocatalytic materials for environmental pollution control.
Deactivation Mechanism of Ptox/Tio2 Photocatalyst Towards the Oxidation of No in Gas Phase

Zhongbiao Wu,Zhongyi Sheng,Yue Liu,Haiqiang Wang,Jiansong Mo

DOI: https://doi.org/10.1016/j.jhazmat.2010.10.013

IF: 13.6

2011-01-01

Journal of Hazardous Materials

Abstract:This study has been undertaken to investigate the roles of PtO and PtO2 deposits in photocatalytic oxidation of NO over Pt-modified TiO2 catalysts. These photocatalysts were prepared by neutralization method and characterized by XRD, BET, XPS, TEM and FTIR. It was found that Pt dopant existed as PtO and PtO2 particles in as-prepared photocatalysts. And these Pt dopants would change their oxidation states during the photocatalytic oxidation reaction. An in situ XPS study indicated that a portion of PtO2 on the surface of Pt/TiO2 was reduced to PtO under UV irradiation. The migration of electrons to PtO2 particles could separate the electrons and holes, resulting in the improvement of photocatalytic activity. And the depletion of PtO2 by electrons could lead to the deactivation of Pt/TiO2 catalyst. Moreover, PtO particles could be corroded to form Pt2+ ions by HNO3, which was one of the products of photocatalytic oxidation of NO. NO would adsorb on Pt2+ related sites to form Ptn+–NO nitrosyls, retarding photocatalytic oxidation of NO to NO2.
NiCoP/g-C3N4 Schottky heterojunctions towards efficient photocatalytic NO oxidation

Xiang Xia,Baogang Xu,Hongyu Zhang,Kang Ji,Xingshuai Ji,Dan Wang,Ping Yang

DOI: https://doi.org/10.1016/j.jallcom.2022.167207

IF: 6.2

2022-12-20

Journal of Alloys and Compounds

Abstract:NiCoP/g-C3N4 Schottky heterojunctions were created by a two-step synthesis for enhanced NO oxidation. NiCo-layered double hydroxides (LDH) were grown on superior thin graphic carbon nitride (g-C3N4) nanosheets by a controlling chemical co-precipitation method. A phosphating process at 300 °C resulted in the transformation in situ of NiCo-LDH into NiCoP composite nanoparticles to create Schottky heterojunctions. Using optimized conditions, heterojunction sample 15-NiCoP/CN revealed excellent photocatalytic NO oxidation with a removal rate of 78%. Photogenerated electrons were efficiently separated and transferred because of Schottky barrier, interfacial charge transport channel, and enhanced light absorption efficiency. Photogenerated electrons reacted with adsorbed O2 to generate superoxide radicals (·O2 ̄) as crucial active species of NO oxidation. The test indicated that the concentration of·O2 ̄ for sample 15-NiCoP/CN reached 7.1 × 10−5 M which was 6.5 times higher than that of g-C3N4 after light irradiation. In addition, low NO2 generation and mineralization rate (92%) suggested that NO was converted into NO3- or NO2- rather than NO2 to mitigate secondary pollution. This result supplied a novel approach to explore the application of transition metal phosphides and g-C3N4 in photocatalytic NO oxidation.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
A Direct Z-scheme Bi2WO6/NH2-UiO-66 Nanocomposite As an Efficient Visible-Light-driven Photocatalyst for NO Removal

Yiqiu Liu,Yi Zhou,Qijun Tang,Qian Li,Si Chen,Zhuxing Sun,Haiqiang Wang

DOI: https://doi.org/10.1039/c9ra09270f

IF: 4.036

2020-01-01

RSC Advances

Abstract:To explore an efficient photocatalyst for NO pollution, a direct Z-scheme photocatalytic system is successfully fabricated by coupling Bi2WO6 with NH2-UiO-66 via a simple hydrothermal synthesis technique. The Z-scheme system promotes the NO photocatalytic oxidation activity with an optimum NO removal rate of 79%, which is 2.7 and 1.2 times that obtained by using only pristine Bi2WO6 and NH2-UiO-66, respectively. Simultaneously, superior selectivity for converting NO to NO3 -/NO2 - is observed. The enhanced photocatalytic performance of the Bi2WO6/NH2-UiO-66 hybrids is attributed to the following two aspects: (i) large specific area of NH2-UiO-66, which exposes more active sites and is beneficial to the adsorption and activation of NO; (ii) outstanding Z-scheme structure constructed between BiWO6 and NH2-UiO-66, which can improve the efficiency of the separation of electron-hole pairs and preserves the strong oxidation ability of hybrids. ESR analysis shows that ·O2 - and ·OH contribute to NO removal. A possible photocatalytic mechanism of NO oxidation on the direct Z-scheme photocatalyst (BWO/2NU) under visible light irradiation is proposed. This work displays the BWO/2NU hybrid's potential for treating low-concentration air pollutants, and the proposed Z-scheme photocatalyst design and promotion mechanism may inspire more rational synthesis of highly efficient photocatalysts for NO removal.
Superior NOx Photocatalytic Removal over Hybrid Hierarchical Bi/BiOI with High Non-No2 Selectivity: Synergistic Effect of Oxygen Vacancies and Bismuth Nanoparticles

Qian Li,Shan Gao,Jing Hu,Haiqiang Wang,Zhongbiao Wu

DOI: https://doi.org/10.1039/c8cy01466c

IF: 6.177

2018-01-01

Catalysis Science & Technology

Abstract:To achieve an efficient photocatalyst for NO pollution control, abundant oxygen vacancies and metallic bismuth (Bi) nanoparticles were simultaneously introduced into three-dimensional hierarchal BiOI via in situ self-reduction with aqueous NaBH4. The obtained 20-Bi/BiOI exhibited superior NOx (NO and NO2) removal efficiency with high selectivity for non-NO2, compared to pristine BiOI. After careful analysis of various characterization results, it was found that such an enhancement was attributed to the synergistic results of shallow donors formed by oxygen vacancies and the surface plasmonic resonance (SPR) effect of Bi nanoparticles, both of which contributed to the promotion of light harvesting and the suppression of the recombination of photoinduced charge carriers. What's more, oxygen vacancies can improve NO adsorption, strongly combine with NO2, and facilitate the formation of OH and O-2(-) radicals, promoting the deep oxidation of NOx (NO and NO2) to NO2- and NO3-, robustly evidenced by the results of ion chromatography. Overall, this work highlights the synergistic effects of Bi and oxygen vacancies introduced by a self-reduction strategy and opens up an effective avenue for addressing NO pollution.
Hierarchical TiO2-g-C3N4 Photocatalyst with Purification Effect for NOx Oxidation Under Cyan Light

Ahmed Al Mayyahi,Archana Sekar,Sabari Rajendran,Shusil Sigdel,Lianying Lu,Juan Wang,Guohong Wang,Jun Li,Placidus B. Amama

DOI: https://doi.org/10.1016/j.jphotochem.2023.114965

2023-06-01

Abstract:NOx photocatalytic oxidation is a promising approach for practical NOx abatement at sub-ppb levels and under ambient conditions. However, conventional photocatalysts are characterized by their low NOx adsorption capacity and activity under visible light. This results in poor NO (g) conversion and may form more toxic NO2 (g), hampering the utilization of photocatalysis in NOx removal. Herein, we employed a hierarchical macro-mesoporous structure composed of Z-scheme TiO2-g-C3N4 hybrid embedded in parallel TiO2 channels as a high adsorption capacity and low band gap photocatalyst for NOx oxidation. This unique structure provides aligned macroporous channels and mesoporous walls for efficient NOx adsorption and storage of NOx oxidation product (i.e., NO 3 - (s)) while enabling visible light absorption. NOx oxidation was conducted in a laminar-flow reactor under 50% relative humidity and simultaneous exposure to blue and green lights (cyan light). TiO2-g-C3N4 showed NO conversion (37%) which is four times higher than that of TiO2 (7%) and two times higher than that of g-C3N4 (17%). In addition, TiO2-g-C3N4 hybrids showed high NOx adsorption capacity and converted NO to nontoxic NO 3 - with minimal formation of NO2, evident by its positive DeNOx index (+74 ppm) in contrast to g-C3N4 with a negative DeNOx (-4 ppm) and TiO2 with a slightly positive DeNOx index (+15 ppm). The study demonstrates the delicate relationship between H2O adsorption on the hybrid structure and NOx photooxidation reaction and provides detailed mechanistic insights on the photocatalytic response. It is expected that the results of this study will benefit ongoing efforts to design visible-light active photocatalysts.

chemistry, physical
Visible light-driven novel Bi2Ti2O7/CaTiO3 composite photocatalyst with enhanced photocatalytic activity towards NO removal

Menglin Shi,Baker Rhimi,Ke Zhang,Jingkun Xu,Detlef W Bahnemann,Chuanyi Wang,Detlef W. Bahnemann

DOI: https://doi.org/10.1016/j.chemosphere.2021.130083

IF: 8.8

2021-07-01

Chemosphere

Abstract:Photocatalysis is regarded as a promising technology for removal of nitrogen oxide (NO), however, the low photocatalytic efficiencies under visible light irradiation and the deactivation of the photocatalyst are as yet the significant issues that should be addressed. In this work, visible-light-driven Bi2Ti2O7/CaTiO3 heterojunction composites were synthesized by a facile in-situ hydrothermal method. The Bi2Ti2O7/CaTiO3 composites displayed superior visible light photocatalytic activity than pure CaTiO3 and pure Bi2Ti2O7 in the removal of NO at the 600 ppb level in air. Among all the composites, Bi2Ti2O7/CaTiO3 containing 20 wt% Bi2Ti2O7 exhibited the best photocatalytic activity, achieving a maximum removal efficiency of 59%. The improved photocatalytic performance is mainly attributed to the strong visible-light-absorbing ability, the presence of an appropriate density of oxygen vacancy defects and the formation of heterojunction between CaTiO3 and Bi2Ti2O7, resulting in an efficient charge separation at the interface as proven by photoluminescence (PL) and photo-induced current measurements. According to trapping experiments and spin-trapping ESR analysis, the •O2- and h+ are the principal reactive species involved in the photocatalytic NO removal. In addition, the as-obtained Bi2Ti2O7/CaTiO3 composite showed good chemical stability, which is beneficial for practical applications in air pollution removal.

environmental sciences
Doping and facet effects synergistically mediated interfacial reaction mechanism and selectivity in photocatalytic NO abatement

Hao Ma,Ye He,Xing'an Dong,Jianping Sheng,Si Chen,Fan Dong,Gengxin Xie,Yanjuan Sun

DOI: https://doi.org/10.1016/j.jcis.2021.07.018

IF: 9.9

2021-12-01

Journal of Colloid and Interface Science

Abstract:The surface atomic coordination and arrangement largely determine photocatalytic properties. Whereas, the intrinsic impact of surface microstructures on the reaction mechanism and pathway is still unclear. Herein, via constructing N-doped Bi2O2CO3 photocatalysts with diverse exposed facets, (110) and (001) facet, we testify that the pivotal roles of crystal facet and doping effect on the intermediate production and reactivity for photocatalytic nitric oxide (NO) abatement. The photoreactivity of N-doped Bi2O2CO3 is documented to be higher than that of the pure samples because of the enhanced light absorption and charge transfer. Further in situ probing experiments and theoretical calculations verify that the unique adsorption patterns and activated intermediates on the (110) facet facilitate the formation of final products and inhibit the generation of toxic NO2 by-product in terms of thermodynamics. More importantly, we found that the selective and nonselective oxidation processes are emerged over (110) and (001) facets of Bi2O2CO3, respectively.

chemistry, physical
2D/3D g-C3N4/BiOI heterostructure catalyst for efficient and robust photocatalytic NO removal

Bin Liu,Hanyuan Huang,Zhijian Xiao,Jingling Yang,Mingshan Zhu

DOI: https://doi.org/10.1016/j.seppur.2023.123183

IF: 8.6

2023-04-01

Separation and Purification Technology

Abstract:Developing visible light responsive photocatalysts with strong light capture ability for catalytic NO removal is of great significance. In this work, we coupled the narrow-gap semiconductor BiOI with graphite-like carbon nitride (g-C3N4) to construct 2D/3D heterostructure and applied it for efficient photocatalytic elimination of NO under visible light irradiation. At relative humidity (RH) of 15 %, g-C3N4/BiOI achieves remarkable NO removal activity (80.5 %) under a gas hourly space velocity (GHSV) of 1,740,000 mL h−1 g−1. Outstanding durability was realized that the NO removal efficiency of g-C3N4/BiOI after 6 consecutive runs. Even at high RH of 50 % and 80 %, g-C3N4/BiOI still exhibited excellent NO removal performances of 80.3 % and 78.5 %, respectively. The heterostructure of g-C3N4/BiOI endowed the enhanced light harvesting, efficient charge separation and rapid charge transfer, which enables sufficient superoxide radicals (O2 −) production to improve the efficiency and strengthen the durability of photocatalytic NO removal. This work provides insights into the rational design of heterostructure photocatalyst toward air purification.

engineering, chemical

Pt Quantum Dots Deposited on N-Doped (bio)(2)co3: Enhanced Visible Light Photocatalytic No Removal and Reaction Pathway

Pt quantum dots deposited on N-doped (BiO)<sub>2</sub>CO<sub>3</sub>: enhanced visible light photocatalytic NO removal and reaction pathway

Carbonate doped Bi2MoO6 hierarchical nanostructure with enhanced transformation of active radicals for efficient photocatalytic removal of NO

Novel Dual Z-scheme Bi/BiOI-Bi2O3-C3N4 Heterojunctions with Synergistic Boosted Photocatalytic Degradation of Phenol

Controlled synthesis and excellent visible light photocatalytic performance of in situ N-doped (BiO)2CO3 hierarchical microspheres self-assembled by nanosheets

Palladium Nanoparticles Embedded Nutshell-like Bi 2 WO 6 as an Efficient and Stable Visible-Light-Responsive Photocatalysts for NO Removal

Enhancing visible-light-driven photocatalytic degradation of nitric oxide with lignite-derived graphene quantum dots/BiOBr heterojunctions

Ti3C2@TiO2/g-C3N4 heterojunction photocatalyst with improved charge transfer for enhancing visible-light NO selective removal

Mechanisms of Interfacial Charge Transfer and Photocatalytic NO Oxidation on BiOBr/SnO2 p-n Heterojunctions

Coral-Shaped TiO 2−δ Decorated with Carbon Quantum Dots and Carbon Nanotubes for NO Removal

S-scheme Sb2WO6/g-C3N4 photocatalysts with enhanced visible-light-induced photocatalytic NO oxidation performance

Characterization and activity of Pd-modified TiO2 catalysts for photocatalytic oxidation of NO in gas phase.

Novel in Situ N-Doped (bio)2co3 Hierarchical Microspheres Self-Assembled by Nanosheets As Efficient and Durable Visible Light Driven Photocatalyst

Deactivation Mechanism of Ptox/Tio2 Photocatalyst Towards the Oxidation of No in Gas Phase

NiCoP/g-C3N4 Schottky heterojunctions towards efficient photocatalytic NO oxidation

A Direct Z-scheme Bi2WO6/NH2-UiO-66 Nanocomposite As an Efficient Visible-Light-driven Photocatalyst for NO Removal

Superior NOx Photocatalytic Removal over Hybrid Hierarchical Bi/BiOI with High Non-No2 Selectivity: Synergistic Effect of Oxygen Vacancies and Bismuth Nanoparticles

Hierarchical TiO2-g-C3N4 Photocatalyst with Purification Effect for NOx Oxidation Under Cyan Light

Visible light-driven novel Bi2Ti2O7/CaTiO3 composite photocatalyst with enhanced photocatalytic activity towards NO removal

Doping and facet effects synergistically mediated interfacial reaction mechanism and selectivity in photocatalytic NO abatement

2D/3D g-C3N4/BiOI heterostructure catalyst for efficient and robust photocatalytic NO removal