Abstract:Capacitor voltage balancing is a critical issue for neutral-point-clamped-based converters, including the two/three-level dual-active-bridge dc–dc converters. The unbalanced capacitor voltage will increase the voltage stress on power devices and negatively affect the reliability of the converters. Two typical problems during the capacitor voltage balancing process should be solved, i.e., power fluctuation minimization and determination of the transformer current polarity. Accordingly, this article proposes a balancing control scheme based on the complementary switching-state (CSS) method. In the CSS method, the switching states, which are identified to be adverse for balancing, will be replaced by their corresponding CSSs to control the neutral-point current while keeping the voltage and current waveforms unchanged. By doing so, the power fluctuation and current overshoot during the balancing process can be significantly reduced. Moreover, since the dynamic voltage and current waveforms are identical to the steady-state waveforms, the transformer current polarity during the balancing process can be identified based on the steady-state power and current models. Therefore, the determination of the transformer current polarity can be simplified compared to the traditional balancing control scheme. Finally, experimental results are carried out to verify the performance of the proposed balancing control scheme.

DC Bus Balancing Control Techniques for the Cascaded Neutral Point Clamped Modular Converter

Neutral Point Voltage Control For Three-Level Fuel Cell Power Conversion System

Capacitor Voltage Balancing for Multi-Level Dual-Active-Bridge DC-DC Converters

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

A Fo-Adrc Based Neutral-Point Potential Balancing For Three-Level Inverter

A DC Bus Voltage Balancing Technique for the Cascaded H-Bridge STATCOM with Improved Reliability under Grid Faults

A Neutral-Point Potential Balancing Control Method with Third Harmonic Injected Pulse Width Modulation for Three-Level Converters

A new voltage-balancing controller in cascaded multilevel converters

Control of the Hybrid Cascaded Converter under Unbalanced Conditions

Capacitor Voltage Balancing Control for a Novel 5-Level Dual Active Bridge Converter

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

High Power Modular Multilevel DC-DC Converter Based on Dual-Loop CPS Modulation

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

A Neutral-Point Voltage Balancing Algorithm for Six-phase H-Bridge Neutral-Point-Clamped Converter

Average Power Control of DC Bus Voltages of Cascaded H-bridge Multilevel Converters

Managed DC voltage utilization technique for the renewable energy source based on the star-connected cascaded H-bridges converter

Modulation and Voltage Balance Control of a Four-Level ANPC H-Bridge Converter for Ship Medium-Voltage Propulsion Systems

A Modulation Technique for Neutral Point Voltage Control of the Three-Level Neutral-Point-Clamped Converter

Voltage-Balancing Strategy for Three-Level Neutral-Point-Clamped Cascade Converter under Sequence Smooth Modulation