Abstract:In this article, based on sampled-data modeling technique, a second-order equivalent circuit that can describe the global dynamic characteristics of dual active bridge (DAB) converter is developed. The proposed technique can characterize the dynamics of the ac current through the transformer and the output voltage. Afterward, by using a sensitive-based tool, named participation factor, it is identified which state variables are critical for system stability and which state variables provide negligible effects. On this basis, the large-signal equivalent circuit is simplified, meanwhile, the parasitic resistance is still taken into account by an intuitive “loss branch.” This model can be used to comprehensively investigate the relationship of the DAB converter stability versus circuit parameters, controller gain, input/reference voltage, and the load conditions, and these results can be expressed analytically. Furthermore, a linearized control method is proposed to eliminate the nonlinear terms in the equivalent circuit model. It facilitates to reduce the sensitivity of system stability to the load condition and reference voltage and helps to enlarge the stable region. Finally, the proposed model is validated by comparing the results obtained by the model with the simulations and experimental results. The effectiveness of the linearized control method is also demonstrated.

Common Duty Ratio Control of Series Resonant Dual Active Bridge Converter

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

A Control Method Based on Minimum Conduction Losses for High Efficiency Isolated Dual-bridge Series Resonant Converters.

Modeling and Analysis of 2/3-Level Dual-Active-Bridge DC-DC Converters with the Five-Level Control Scheme

Average Modeling of Dual-side LCC Resonant Converter with Semi-bridgeless Active Rectifier

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Common-Duty-Ratio Control of Input-Series Output-Parallel Connected Phase-shift Full-Bridge DC–DC Converter Modules

A Constant Current Digital Control Method for Primary-Side Regulation Half-Bridge LLC Resonant Converter

An Asymmetrical Duty Cycle Control of Three Phase LCL Dual Active Bridge Converter to Reduce RMS Phase Current

A novel three-phase seven-level active clamped converter using H-bridge as a level doubling network

Control and Study of the Three-Phase Three-Level Dual Active Bridge DC Converter

Small-Signal Models of Resonant Converter with Consideration of Different Duty-Cycle Control Schemes

Using Sampled-Data Modeling Method to Derive Equivalent Circuit and Linearized Control Method for Dual-Active-Bridge Converter

Average Modeling of a Dual-Half-Bridge Converter Modulated With Three Degrees of Freedom

Power Flow and Inductor Current Analysis of PWM Control for Dual Active Bridge Converter

Modified Unified PWM Control to Operate the Dual Active Bridge Converters under ZVS in the Whole Load Range

ZVS Control Strategy of Dual Active Bridge DC/DC Converter with Triple-Phase-shift Modulation Considering RMS Current Optimization

Optimized Modulation and Dynamic Control of a Three-Phase Dual Active Bridge Converter with Variable Duty Cycles

Accurate Frequency‐domain Analysis and Hybrid Control Method for Isolated Dual Active Bridge Series Resonant DC/DC Converters

Comprehensive Analysis and Efficiency-Optimized Modulation of Resonant Dual Active Bridge DC-DC Converters with T-Type Impedance Network