Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

Passivity-Based Elastic Joint Robot Control with On-Line Gravity Compensation

An adaptive compliance position control based on EKF for series elastic actuation

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Adaptive Robust Posture Control of A Pneumatic Muscles Driven Parallel Manipulator with Redundancy

Standing Posture Control of Bipedal Robots with Adaptive Compliance under Unknown Payload Variations and External Disturbances

Passivity-Based Motion and Force Tracking Control for Constrained Elastic Joint Robots

Resonance Analysis and Unified Compliance Controller Design for Elastic Joint Robots

Decoupled Torque Control of Series Elastic Actuator with Adaptive Robust Compensation of Time-Varying Load-Side Dynamics.

A Variable Structure Passivity Control Method for Elastic Joint Robots Based on Cascaded High-Order State Estimation

Constrained Passive Interaction Control: Leveraging Passivity and Safety for Robot Manipulators

Passivity based control of flexible joint robot with dynamic friction compensation

A Method to Regulate the Torque of Flexible-Joint Manipulators with Velocity Control Inputs

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Active Control of Contact Force for a Quasi-Translational Flexible-Link Parallel Mechanism

Interconnection and Damping Assignment Passivity-Based Control for Flexible Joint Robot

Cooperative compliance control of the dual-arm manipulators with elastic joints

Research on Gravity Compensation in Motion Control of Multi-joint Robot

FPGA-implementation of passivity-based control for elastic-joint robot

Whole Body Control of an Autonomous Mobile Manipulator Using Series Elastic Actuators

Adaptive Passivity-Based Pose Tracking Control of Cable-Driven Parallel Robots for Multiple Attitude Parameterizations