Abstract:Epoxy resin nanocomposites are widely used in the field of electrical insulation packaging. It is of great significance to regulate the dielectric and insulation properties of composite materials by introducing nano-filler to meet special application requirements. This work proposes a chemical copolymerization method, fluorinated polystyrene nanospheres are synthesized through an addition reaction as filler, and finally the epoxy nanocomposites are prepared. The polystyrene nanospheres have a uniform size and good compatibility with the epoxy resin. The introducing of nanospheres reduces the dielectric constant of the epoxy resin composite material and increases the breakdown strength simultaneously. Although the dielectric loss increases, the composites' imaginary part remains below 0.04 within 1 MHz frequency. In particular, the fluorinated polystyrene/epoxy composite with a mass fraction of 2% exhibits a decrease in dielectric constant and DC conductivity, while the AC breakdown strength and DC breakdown strength increase by 12.6% and 6%, respectively. The results of the pulse electro-acoustic method indicate that the charge injection of the epoxy resin filled with non-fluorinated polystyrene nanospheres is evident, while the introduction of fluorinated nanospheres significantly reduces the charge injection level. Calculations based on the depolarization process reveal that the introduction of fillers leads to an increase in trap density and depth of energy levels in the composites. Notably, the epoxy resin filled with fluorinated fillers has the deepest trap levels, providing an explanation for the improved insulation breakdown performance. The research can provide guidance for regulating dielectric properties of epoxy composites and material synthesis for the application of electrical insulation packaging.

Understanding surface discharge activity with epoxy silicon carbide nanocomposites: Understanding Surface Discharge Activity with Epoxy Silicon Carbide Nanocomposites

Investigation of Electrical and Thermal Properties of Epoxy Resin/Silicon Carbide Whisker Composites for Electronic Packaging Materials

Space Charge Dynamics in Epoxy Based Composites under DC and Square Pulse Wave of Different Polarities and Frequencies

Surface charge dissipation and DC flashover characteristic of DBD plasma treated epoxy resin/AlN nanocomposites

Improving Insulation Properties of Epoxy Filled with Surface Fluorinated Polystyrene Nanospheres

Potential of Epoxy Nanocomposites for Packaging Materials of High Voltage Power Modules: A Validation Using Experiments and Simulation

Surface Potential Decay on LDPE and Its Nanocomposites

Non-linear AC Dielectric Properties of Epoxy Composites Filled with Core-shell SiC Particles

Influence of Interfacial Contact Morphology on High Frequency Breakdown Strength and Partial Discharge Characteristics of Epoxy-Polyimide

Electrical Modeling of Dielectric Barrier Discharge Considering Surface Charge on the Plasma Modified Material

Electrical Surface Breakdown Characteristics of Micro- and Nano-Al2O3 Particles Co-doped Epoxy Composites

Surface Discharge Phenomena of Silicon in Atmospheric Air

The mechanism of EP/SiC coating modulated DC flashover characteristics of epoxy composites in SF6/N2 mixtures

Enhancing Surface Insulation of Epoxy Composite by Constructing Nanofiller‐skeleton Charge Channel

Electrical Characterization of Epoxy Nanocomposite under High DC Voltage

Properties and Simulating Research of Epoxy Resin/Micron-SiC/Nano-SiO2 Composite

Application of surface-modified XLPE nanocomposites for electrical insulation- partial discharge and morphological study

Temperature dependent surface potential decay and flashover characteristics of epoxy/SiC composites

Surface Charge Properties of Epoxy Composites under DC Voltage Affected by Surface and Bulk Conductivity

Dynamic Observation of Dc Surface Charge Dissipation for Epoxy-Resin/alumina Composite

Phase Dependence of Surface Charge Measurement on Epoxy Insulator in C4F7N/CO2 under AC Voltage