Abstract:The no-insulation (NI) high-temperature superconductor (HTS) winding technique enables the fabrication of highly compact magnets with self-quench protection. NI pancake coils are implemented to develop a 28-T HTS magnet for the operation of a 792-GHz gyrotron, which is a microwave source for dynamic nuclear polarization nuclear magnetic resonance. To this end, three NI all-GdBCO double pancake (DP) magnets were fabricated using different winding diameters and procedures. The objective was to explore different mechanical coil protection mechanisms at high magnetic fields, including clamping, overband, and solder impregnation. Experiments in liquid helium using magnets with winding diameters of 18, 25, and 66 mm yielded a center field of 14.4, 11.2, and 8.1 T, respectively. The maximum currents applied to the DP magnets ranged from 780 to 1000 A. Both the 18 and 66 mm DP coils contained 400 m (2 × 200 m) HTS tape, while the 25 mm seamless DP coil consisted of only one continuous 200 m HTS tape. The 25 mm magnet with solder impregnation showed the best repeatability, although the current density was reduced owing to the solder thickness between the coil windings. Critical to the implementation of such coils in liquid helium is to effectively transfer high currents to the magnet, while not compromising the helium boil-off. Furthermore, the design of hybrid copper-HTS current leads capable of carrying current larger than 1000 A from room temperature to the HTS magnet at 4.2 K is presented. The implementation of liquid nitrogen-cooled hybrid copper-HTS current leads reduced the helium boil-off and permitted independent temperature control of the current leads.

Performance and Analysis of No-Insulation HTS Toroidal Magnet

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Thermal Analysis of a Toroidal Field Model Magnet with HTS Wires

Numerical Simulation of a No-Insulation BSCCO Toroidal Magnet Applied in Magnetic Confinement Fusion

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Feasibility Analysis of Partially Insulated Nb3Sn EU DEMO Toroidal Field Coil

Research of Hts Application on Tokamak Magnets

Thermal Stability and Mechanical Behavior in No-Insulation High-Temperature Superconducting Pancake Coils

Operation of Prototype Race-Track Closed-Loop HTS Coil with Metal-as-Insulation in Solid Nitrogen

Study on the Thermal Characteristic of a 150 Kj/100 Kw Conduction-Cooled HTS Magnet

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

An HTS NI Magnet Charged by Multiple Flux Pumps: Construction and Test of the Prototype

Analysis of Charging Characteristics of a 500 MHz HTS-LTS Series NMR Magnet with an Intra-Layer No-Insulation HTS Layer-Wound Coil Structure

ANALYSIS OF A CONDUCTION-COOLED HTS MAGNET

Test and Analysis of an Ybco Toroidal Magnet

Design of a 10 MJ HTS Superconducting Magnetic Energy Storage Magnet

Design and Operating Characteristics Analysis of HTS Magnets for Dipole-Type DC Induction Heating

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

A Real-time Monitoring System for Investigating Electromagnetic Behaviors of An HTS Coil

Electromagnetic Properties Analysis On Superconducting Magnet Coil For Magnetoplasmadymamic Thruster

Development of Testing Device for Critical Current Measurements for HTS/LTS