Abstract:Large-scale and high precision absolute distance measurement is essential in aerospace technology and advanced manufacturing. Traditional method of measuring distance cannot meet this requirement. Since the advent of optical frequency comb, it has brought a revolutionary breakthrough to absolute distance measurement. In the past decade, there were proposed many methods to measure long absolute distances with high accuracy. Especially, the simple method of using adjacent pulse-to-pulse distance as a ruler for distance measurement has been widely used. The accuracy of this method depends mainly on the knowledge of relative positions of the two overlapped pulses, i.e., pulse-to-pulse alignment. In our previous study, we have proposed a heterodyne interferometer based on synthetic wavelength method with femtosecond laser. The synthetic wavelength is derived from the virtual second harmonic and the real second harmonic, and the real second harmonic is produced by a piece of periodically poled LiNbO3 (PPLN) crystal. However, the second harmonic generation system makes the system complicated, and causes a great optical energy loss. In order to solve this problem, we generate the synthetic wavelength by two spatial band-pass filters in our present study, which can simplify the system greatly. Moreover, we can reduce the optical energy loss and tune the synthetic wavelength by controlling the angle of the filter. The synthetic wavelength used in the present system is 71.39 μm. The interferometricphase of the synthetic wavelength is used as a mark for the pulse-to-pulse alignment. In order to reduce the influences of air disturbance and temperature variation, we set up a thermal-insulated cover for the interferometer to stabilize the environment in the system. By using this cover, the optical path length difference of the system in 450 s can be reduced from 8.56 μm to 0.21 μm. To demonstrate the e?cacy of the method described above, the target mirror is moved by eight steps in steps of 5 mm. We compare the measurement results with those obtained by a commercial interferometer, and the residual error is less than 100 nm. Since the measurement range is larger than our previous study, the relative accuracy is better than the previous system. In conclusion, we demonstrate a synthetic-wavelength based absolute distance measurement by using heterodyne interferometry of a femtosecond laser. Two spatial band-pass filters are used to generate the synthetic wavelength, which can simplify the system. The comparison results show that the system has an accuracy better than 100 nm in a displacement of 40 mm. The accuracy of the experimental system can be further improved by making the common-path of the two interferometers longer, locking the fceo to the atomic clock and sampling the data synchronously.

Synchronous Phase Demodulation for Real-Time Absolute Distance Measurement Based on Optical Comb Multi-Wavelength Interferometry

Efficient Phase Demodulation of Optical Carrier-Based Microwave Interferometry for High-Precision Dynamic Distance Measurement

Real-time Absolute Distance Measurement by Multi-Wavelength Interferometry Synchronously Multi-Channel Phase-Locked to Frequency Comb and Analysis for the Potential Non-Ambiguity Range

Synthetic-wavelength-based Dual-Comb Interferometry for Fast and Precise Absolute Distance Measurement

Synthetic Wavelength Interferometry of an Optical Frequency Comb for Absolute Distance Measurement.

Absolute distance measurement by dual-comb interferometry with multi-channel digital lock-in phase detection

A PM-based Approach for Doppler Frequency Shift Measurement and Direction Discrimination

Simultaneous Phase Detection of Multi-Wavelength Interferometry Based on Frequency Division Multiplexing

Phase Measurement Method Based on Digital Dual Frequency Comb for High-Precision High-Speed Heterodyne Interferometry

A Photonic Approach for Doppler Frequency Shift Measurement with Dispersion Medium

Simplified Phase-Stable Dual-Comb Interferometer for Short Dynamic Range Distance Measurement.

Absolute Distance Measurement by Two-Color Heterodyne Pulse-to-pulse Interferometry of Optical Frequency Combs

Absolute Distance Measurement by Dual-Comb Nonlinear Asynchronous Optical Sampling.

Phase-shifted demodulation scheme for fiber-optic interferometric sensors with combined waveform phase modulation

Synthetic-wavelength Based Absolute Distance Measurement Using Hetero Dyne Interferometry of a Femtosecond Laser

Absolute Distance Measurement Using Frequency-Sweeping Heterodyne Interferometer Calibrated by an Optical Frequency Comb

High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

Strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear detection by numerical simulation

Length measurement based on multi-wavelength interferometry using numerous stabilized frequency modes of an optical comb

High-Speed and High-Resolution Low-Coherence Interferometric Demodulation Without Phase Jumps

Absolute Distance Measurement Using an Optical Comb and an Optoelectronic Oscillator