Improved analytical model for calculating mesh stiffness and transmission error of helical gears considering root curve: Theoretical analysis and experiments
Ziqian Liu,Yanjun Jiang,Ruitian Luo,Yangda Wu,Jiaopeng Huang,Nan Feng,Kui Li
DOI: https://doi.org/10.1177/16878132241228196
IF: 2.1
2024-02-10
Advances in Mechanical Engineering
Abstract:Advances in Mechanical Engineering, Volume 16, Issue 2, February 2024. A modified algorithm is proposed in this study to correct time-varying mesh stiffness (TVMS) and transmission error (TE) in helical gears considering tooth root transition curve. The parametric model of helical gear is established by using the meshing principle of helical gear and hob in order to obtain the accurate tooth root transition curve. Moreover, a TE test rig is set up to compare the theoretical and experimental results. The results of the improved algorithm are very similar to the experimental results compared to the traditional model, and the relative error of TE is also small. In this study, the effect of multi-parameters (e.g. pressure angle, meshing position, transverse contact ratio, and overlap ratio) on TE are investigated by comparing theory with experimental analysis. Through the analysis of parameters, it has been established that an elevation in pressure angle leads to a decrease in TE, followed by an increase. In the event that the meshing position is situated closer to the nodal point, the TE slightly decreases. Moreover, as the transverse contact ratio and overlap ratio increase, the TVMS increases, while the TE decreases. When the overlap ratio approaches an odd multiple of 0.5, the TE displays a significant peak.
engineering, mechanical,thermodynamics