Abstract:During the past years, much effort has been concentrated on the effect of biaxial load on fracture character. But fracture parameters often studied are line elastic fracture parameters such as stress intensity factor K and energy release ratio G , which are used for elastic materials. It is not appropriate for pressure vessel steels which are often elastic plastic material. The development of local approach to fracture put forward a new parameter, Weibull stress, which is widely used as a measure of the probability of brittle failure of elastic plastic steel. In order to find the effect of biaxial load on Weibull stress, a computer program of Weibull stress is developed and is tested and proved true. Finite element method has been adopted to analyze the stress and strain fields of a finite plate containing a through thickness crack. The finite plate is made of ASTM A36 steel and is subjected to biaxial load under plane stress and plane strain conditions. Combined the finite element calculation results and the Weibull stress computer program, the Weibull stress and the brittle fracture probability of the finite plate under different biaxial load are analyzed. The calculation results show that the biaxial load almost has no effect on Weibull stress and on brittle fracture probability under plane stress condition, however, Weibull stress and brittle fracture probability increase with the increase of the ratio of biaxial load under plane strain condition. When the load ratio is 0.9 and the ratio of biaxial load equals to 2, the difference between the Weibull stress under biaxial load and that under axial load is maximal and it reaches 29%.

STATISTICAL ANALYSIS OF BENDING STRESS INTENSITY FACTORS FOR CRACKED PLATE WITH UNCERTAIN PARAMETERS

ANALYSIS OF INTERFACE CRACKS AT A FIBER END

Interaction between rectangular cracks embedded in infinite medium

ELASTIC PLASTIC ASYMPTOTIC ANALYSIS OF CRACKS ON BIMATERIAL INTERFACE UNDER THREE DIMENSIONAL CONSTRAINT

Stress Intensity Factor and Ultimate Tensile Strength Analysis of Eccentrically Cracked Plates

Probabilistic residual ultimate strength assessment of cracked unstiffened and stiffened plates under uniaxial compression

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Interaction and Influence Between Cracks in Different Positions Through Finite Element Analysis

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

STUDY ON PARAMETER OF WEIBULL STRESS UNDER BIAXIAL LOAD

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

A numerical analysis of stress intensity factors for cracks emanating from an elliptical hole in a rectangular plate under biaxial loads

Ultimate Fracture Strength Analysis of Thin Rectangular Plate with Inclined Center Crack

Crack Arrest Behavior of Central-Cracked Stiffened Plates under Uniform Tensions

DEPENDENCE OF MECHANICAL PROPERTIES ON STRESS STATES OF ROCK MASS WITH RANDOMLY DISTRIBUTED CRACKS

Research on the stress intensity factor calculation of multi-elliptical hole-edge crack

Ultimate Tensile Strength Analysis of Rectangular Plate with Center Through-thickness Crack

Numerical Simulation of Stress Intensity Factor under Multiaxial Loading

Three-dimensional Stress and Stress Intensity for Tensioned Flat Plates with Edge Cracks

ELASTIC-PLASTIC ANALYSIS OF A DYNAMICALLY LOADED DOUBLE NOTCH THIN PLATE

Study on stress intensity factor with single edge defect crack under tensile load