Abstract:The study of the pyrolysis characteristics of oil shale, an important strategic resource, is of great significance for oil shale refining and in situ underground mining. In this study, using the oil shale from Jimsar region of Xinjiang, in combination with thermogravimetric analyzer (TG), Fourier transform infrared spectroscopy (FTIR), and mass spectrometry (MS) techniques, the pyrolysis characteristics and mechanism of the oil shale are analyzed according to the experimental results and explored the effect of its pyrolysis on the development of the pore. The results, the pyrolysis with three stages, show the following: (1) The first stage is 23-390°C. The precipitation of adsorbed water within the oil shale and the dehydration of gypsum are mainly at 100°C or so, appearing some microcapillary pores and other temperature sections change little. (2) The second stage is 390-527°C. The organic matter pyrolysis of Jimsar oil shale accounts for 71.1% of the total weight loss of oil shale. This stage has the greatest impact on the evolution of pore structure, and there are two weight loss peaks at 458°C and 506°C, respectively, in the thermogravimetric curve. Combined with FTIR-MS, the main products of its pyrolysis gas are H2, H2O, CO2, CH4, and CnHm and will change the original pore surface of oil shale, create new pore volume, and produce complex and irregular pore structure. (3) In third stage (527-800°C), the formation of H2, CO2, and hydrocarbon gases suggests that this stage includes not only the decomposition of major inorganic components like carbonate and clay but also the degradation process of some organic matter. At this stage, the CO2 generated in the precipitation process will lead to a large number of pores in oil shale. Crack grids will appear, due to the melting and recrystallization of some clay minerals. Once the interaction between the two is particularly intense, the mineral skeleton may rupture and collapse. The pyrolysis characteristics above provide a basis for the analysis of the pore structure evolution of oil shale and are of implications and practical application value to the exploitation of shale oil.

Influence of Temperature on the Product Distribution During the Fast Pyrolysis of Indonesian Oil Sands and the Relationships of the Products to the Oil Sand Organic Structure

Experimental Study on Biomass Pyrolysis in Fluidized Bed

Changes of Components and Chemical Structure of Bitumen-Derived Liquids During Retorting Indonesian Oil Sands

Study on the Staged and Direct Fast Pyrolysis Behavior of Waste Pine Sawdust Using High Heating Rate TG-FTIR and Py-GC/MS

The core factors in determining product distributions during pyrolysis: The synergistic effect of volatile-char interactions and temperature

Effect of Torrefaction Pretreatment on the Fast Pyrolysis Behavior of Biomass: Product Distribution and Kinetic Analysis on Spruce-Pin-fir Sawdust

Influence of Temperature on Products from Fluidized Bed Pyrolysis of Wood and Solid Recovered Fuel

Pyrolysis of vegetable oil soapstock in fluidized bed: Characteristics of thermal decomposition and analysis of pyrolysis products

Pyrolysis Characteristics and Effect on Pore Structure of Jimsar Oil Shale Based on TG-FTIR-MS Analysis

Molecular Composition Characterization of Oilsand Heating Experiments to Investigate Steam-Solvent Effects and Chemical Reactions During Thermal Recovery

Pyrolysis characteristics of oil shale semi-coke and its extracted bitumen

Chemical characterization of bitumen-derived pyrolysis oil

Effect of Temperature and Hydrogen on Product Distribution and Evolution of Char Structure During Pyrolysis of Bituminous Coal in a Drop Tube Furnace

Pyrolysis Behaviors of Oilfield Sludge Based on Py-GC/MS and DAEM Kinetics Analysis

In Situ FTIR Analysis of the Evolution of Functional Groups of Oil Shale During Pyrolysis

Influence of pyrolysis temperature and time on the cellulose fast pyrolysis products: Analytical Py-GC/MS study

Online characterization of pyrolysis products and kinetics study for the pyrolysis of a coal

Studies of Fast Co-Pyrolysis of Oil Shale and Wood in a Bubbling Fluidized Bed

Pyrolysis behaviors and product distribution of Shenmu coal at high heating rate: A study using TG-FTIR and Py-GC/MS

Experimental Investigation on Gas-Liquid-solid Tri-Phase Product Distributions During the Simulated In-Situ Pyrolysis of Tar-Rich Coal

Pyrolysis temperature effect on compositions of basic nitrogen species in Huadian shale oil using positive-ion ESI FT-ICR MS and GC-NCD