Abstract:Preparation of hemp hurd‐based biomaterials and characterization of their structural, morphological, mechanical and thermal properties. Biocomposites are an emerging field in plastic industry. The incorporation of agri‐food waste in conventional or biobased polymer matrices allows the industry to lessen its carbon footprint, while producing recyclable plastic products. In this work, hemp hurd, a byproduct of hemp fiber production process, was used as a filler to prepare novel compostable composites in two different loadings (22% and 32% w/w respectively). Waste hemp hurds were selected due to their abundance and the lack of derived high‐value products. Three different polymers were used, namely poly[(tetramethyleneadipate)‐co‐(tetramethyleneterephthalate)] (PBAT) and poly(tetramethylene succinate) (PBS) as compostable polymers and a polyethylene elastomer for comparison. The bare polymers and prepared blends were then characterized for their structure and morphology by XRD and FESEM, as well as for their wettability, thermal and mechanical properties (namely energy absorbed on impact and flexural modulus). Structural and morphological characterization unveiled the different interactions occurring between hemp and the polymer matrices, suggesting the major impact of the type of used polymer when compared with biomass loading percentages. Mechanical tests showed that both PBAT and PBS blends properties are comparable to those of the pure polymers (i.e., in the case of PBAT the flexural modulus of the pure polymer was 82.2 MPa while the hemp‐loaded blends stood at around 50 MPa, whereas all PBS polymers and blends were 220 MPa, with no statistical difference between samples). These biomaterials have also similar thermal properties with respect to the bare polymers, underlining the promising potential as sustainable alternative to pure polymers. Highlights Waste hemp hurds were used to load biodegradable polymers at different percentages. Hemp hurd‐based biomaterials with excellent properties were prepared. Polymer flexural behavior was maintained even after hemp addition. Polymer‐hemp interactions for each polymeric matrix were elucidated. Hemp substitutes up to 32% w/w of polymer without affecting its properties.

Improving the performance of hemp hurd/polypropylene composites using pectinase pre-treatments

Combining Fiber Enzymatic Pretreatments and Coupling Agents to Improve Physical and Mechanical Properties of Hemp Hurd/Wood/Polypropylene Composite

Mechanical performance of epoxy matrix composites reinforced by physically and chemically treated hemp fiber

Study on Mechanical Properties and Thermal Stability of Polypropylene/hemp Fiber Composites

Improvement of Mechanical Properties of Noil Hemp Fiber Reinforced Polypropylene Composites by Resin Modification and Fiber Treatment

Preparation of hemp‐based biocomposites and their potential industrial application

Enhancing hemp fiber performance: insights into chitosan treatment and structural evolution

Fabrication of Pondcypress Fiber with Intact Structure and Multiple Active Hydroxyl Groups by Alkali Aided Two-Step Mechanical Refining

The physical and chemical properties of hemp fiber prepared by alkaline pectinase–xylanase system

Alkali Synergetic Two-Step Mechanical Refining Pretreatment of Pondcypress for the Fiber with Intact 3D Structure and Ultrahigh Cellulose Accessibility Fabrication

Preparation of waste Camellia oleifera shell and high‐density polyethylene composites: Effect of pretreatment on fiber and materials properties

Enhancing green polyethylene composites with filler heat treatment: Pecan nutshells and Pinus sawdust impact

Characterisation of microcrystalline cellulose from waste green pea pod sheath and its sunn hemp fibre‐polyester composite: A step towards greener manufacturing

Reuse polyester/cotton blend fabrics to prepare fiber reinforced composite: Fabrication, characterization, and interfacial properties evaluation

Development of hemp fiber composites with recycled high density polyethylene grocery bags

Multifunctional Properties of PBAT with Hemp (Cannabis sativa) Micronised Fibres for Food Packaging: Cast Films and Coated Paper

Effect of Chemical Treatments on the Mechanical Properties of Jute/Polyester Composites

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

3D printing of polypropylene reinforced with hemp fibers: Mechanical, water absorption and morphological properties

Efficient Hydrophobic Modification of Old Newspaper and Its Application in Paper Fiber Reinforced Composites

Experimental investigation of mechanical properties of jute/hemp fibers reinforced hybrid polyester composites