Abstract:The anaerobic digestion model No 1 (ADM1), with fixed fractions of the substrate components, is currently used to simulate methane production during the anaerobic digestion (AD) of waste activated sludge (WAS). However, the goodness-of-fit for the simulation is not ideal due to the different characteristics of WAS from different regions. In this study, a novel methodology based on a modern instrumental analysis and 16S rRNA gene sequence analysis for the fractionation of organic components and microbial degraders in the WAS is investigated to modify the fractions of the components in the ADM1. The combination of Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (NMR) analyses were used to achieve a rapid and accurate fractionation of the primary organic matters in the WAS that was verified using both the sequential extraction method and the excitation-emission matrix (EEM). The protein, carbohydrate, and lipid contents in the four different sludge samples measured using the above combined instrumental analyses were 25.0 - 50.0%, 2.0 - 10.0%, and 0.9 - 2.3%. The microbial diversity based on 16S rRNA gene sequence analysis was utilized to re-set the initial fractions of the microbial degraders in the ADM1. A batch experiment was utilized to further calibrate the kinetic parameters in the ADM1. Based on the above optimization of the stoichiometric and kinetic parameters, the ADM1 with full parameter modification for WAS (ADM1-FPM) simulated the methane production of the WAS very well with a Theil's inequality coefficient (TIC) of 0.049, which was increased by 89.8% than that of the default ADM1 fit. The proposed approach, with its rapid and reliable performance, demonstrated a strong application potential for the fractionation of organic solid waste and the modification of ADM1, which contributed to a better simulation of methane production during the AD of organic solid wastes.

Investigating the Possibility of Applying an ADM1 Based Model to a Full-Scale Co-Digestion Plant

Examining a Pretty Simple and Low Cost Method for Modeling of Biogas Production from Biodegradable Solids

Examining A Hybrid Plug-Flow Pilot Reactor Foranaerobic Digestion of Farm-Based Biodegradable Solids

Application of a simplified ADM1 for full-scale anaerobic co-digestion of cattle slurry and grass silage: assessment of input variability

A novel approach for the fractionation of organic components and microbial degraders in ADM1 and model validation based on the methanogenic potential

ADM1-Based Modeling of Biohydrogen Production through Anaerobic Co-Digestion of Agro-Industrial Wastes in a Continuous-Flow Stirred-Tank Reactor System

Modeling the dynamic performance of full-scale anaerobic primary sludge digester using Anaerobic Digestion Model No. 1 (ADM1)

Modeling and Simulation of Biogas Production in Full Scale with Time Series Analysis

Application of anaerobic digestion model No. 1 for simulating fermentation of maize silage, pig manure, cattle manure and digestate in the full-scale biogas plant

A hybrid approach of anaerobic digestion model no. 1 and machine learning to model and optimize continuous anaerobic digestion processes

Modeling the Performance of Anaerobic Digestion Reactor by the Anaerobic Digestion System Model (ADSM)

Modifications to the anaerobic digestion model no. 1 (ADM1) for enhanced understanding and application of the anaerobic treatment processes - A comprehensive review

Analysis of biogas production from sewage sludge combining BMP experimental assays and the ADM1 model

Anaerobic Co-Digestion of Municipal Biomass Wastes and Waste Activated Sludge: Dynamic Model and Material Balances

Simulation of integrated anaerobic digestion-gasification systems using machine learning models

Anaerobic Co-Digestion of Food Waste with Sewage Sludge: Simulation and Optimization for Maximum Biogas Production

A new integrated system for loading and scheduling in cellular manufacturing

Modification of Anaerobic Digestion Model No.1 with Machine Learning Models Towards Applicable and Accurate Simulation of Biomass Anaerobic Digestion

Assessment of a full-scale solid-state anaerobic co-digestion: A multi-component substrate analysis by using ORWARE

Modeling key intermediates during anaerobic digestion of lipid rich kitchen waste with an extended ADM1

Improvement of Biogas Production Utilizing a Complex Anaerobic Digestion Model and Gradient-Based Optimization