Mechanical Simulation of Neural Electrode-Brain Tissue Interface under Various Micromotion Conditions

Wenguang Zhang,Zhengwei Li,Merceron Gilles,Dongdong Wu

DOI: https://doi.org/10.5405/jmbe.1444

IF: 2

2014-01-01

Journal of Medical and Biological Engineering

Abstract:Micromotion is one of the most important factors that influence the long-term stability of neural electrodes. In order to improve the long-term stability of brain-implanted electrodes, this study uses finite element simulation for static and transient analyses. In particular, the effects of micromotion frequency and adhesion state on the mechanical state of the electrode-brain tissue interface are investigated based on the commercial electrode A1x16-3-100-413. The results demonstrate that micromotion frequency has a great effect on the maximum von Mises (VM) stress, revealing that higher frequencies are more harmful than lower frequencies in terms of the long-term stability of the electrode. When the frequency is 20 Hz, the stress reaches its maximum value, and then increases very slightly with frequency increasing. Results also show that the degree of physical coupling between the electrode and the brain tissue has a significant influence on the interfacial mechanical state. Enhancing the adhesion between the electrode and the brain tissue can effectively decrease the stress, strain, and delamination of the microelectrode tip with respect to the adjacent neural tissue, and thus improve the working life of implanted electrodes. The cyclic hysteresis energy is highly dependent on the adhesion of the electrode-tissue interface; the energy values are highest for a low electrode-tissue physical coupling. The results indicate that it is important to minimize the micromotion of the brain tissue caused by neural electrodes. A neural electrode with a biofouling-resistant coating should thus be developed to optimize the interface to enhance the adhesion between the brain tissue and electrodes.