Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Perovskite Solar Cells: Perovskite Solar Cells on Corrugated Substrates with Enhanced Efficiency (Small 46/2016)

Perovskite Solar Cells on Corrugated Substrates with Enhanced Efficiency.

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Surface Analytical Investigation on Organometal Triiodide Perovskite

Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Improved Fill Factor Via Interface Engineering with Graphene.

Enhancing Perovskite Solar Cell Performance Through Surface Engineering of Metal Oxide Electron-Transporting Layer

Numerical Simulation: Toward The Design Of High-Efficiency Planar Perovskite Solar Cells

(Invited) Uniform Nanostructures for Highly Efficient and Reproducible Perovskite Solar Cells

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Refining the Substrate Surface Morphology for Achieving Efficient Inverted Perovskite Solar Cells (Adv. Energy Mater. 43/2023)

Engineering of Electron-Selective Contact for Perovskite Solar Cells with Efficiency Exceeding 15%.

Recent progress and challenges of organometal halide perovskite solar cells

Morphology Optimization of Perovskite Films for Efficient Cells and Modules through Solvent Engineering

Novel Planar Heterostructure Perovskite Solar Cells with CdS Nanorods Array As Electron Transport Layer

Recent Advances in Perovskite Solar Cells: Morphology Control and Interfacial Engineering

Highly Efficient and Reproducible Planar Perovskite Solar Cells with Mitigated Hysteresis Enabled by Sequential Surface Modification of Electrodes

Tailoring Perovskite Compounds for Broadband Light Absorption

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Rational Interface Design and Morphology Control for Blade‐Coating Efficient Flexible Perovskite Solar Cells with a Record Fill Factor of 81%