Abstract:The self-closed bonds limit the molecular adsorption on graphene, which in turn leads to low sensitivity of the gas sensors. In this article, a gas sensor based on surface-oxidized chemical vapor deposited (CVD) graphene is presented for ammonia (NH3) gas sensing. Oxygen functional groups are introduced in graphene through the in situ UV-ozone (UVO) treatment, which is considered to be convenient, low cost, and compatible with large-scale preparation. The NH3 with concentration ranging from 50 to 500 ppm has been tested to evaluate the sensing performance of the proposed gas sensors. The results show that sensor treated for 4 min exhibits the best response to NH3 which is over four times than that of pristine graphene. More importantly, the sensing response increases linearly from 8.93% to 43.11% under 500-ppm NH3 as UVO treatment time increase in the range from 0 to 4 min, whereas the gas response decreased to 28.15% after exposure time is up to 8 min. This may be because surface oxidation dominates during short-term UVO exposure, but destructive etching dominates during a long-term exposure. In addition, the response speed of UVO-treated gas sensor is much faster than that of pristine graphene, whereas no significant change is observed in the recovery process. The proposed gas sensor also exhibits good selectivity, while there is a slight degradation of 5% in long-term stability after 18 days. The proposed facile method may provide reference value for the improvement of surface modification and gas sensing properties of other two-dimensional (2-D) materials.

Morphology Optimization of Cvd Graphene Decorated with Ag Nanoparticles As Ammonia Sensor

Quantitative Description of Ag Nanoparticles-Graphene Hybrids with Optimized Morphology on Sensing Performance

Controllable Decoration of CVD-grown Graphene with Au NP As a Promising Ammonia Sensing Platform

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Controllable Synthesis Of Silver Nanoparticle-Decorated Reduced Graphene Oxide Hybrids For Ammonia Detection

Excellent Ammonia Sensing Performance of Gas Sensor Based on Graphene/titanium Dioxide Hybrid with Improved Morphology

Graphene/NiCo<sub>2</sub>S<sub>4</sub> Hybrid System for Ammonia Gas Sensing Application

Graphene oxide reinforced core-shell structured Ag@Cu2O with tunable hierarchical morphologies and their morphology-dependent electrocatalytic properties for bio-sensing applications

NH3 gas-sensing application of Ag-doped ZnO–CuO nanocomposite synthesized via chemical route

Sensitivity Investigation for the Dependence of Monolayer and Stacking Graphene Nh3 Gas Sensor

Optimization Study on Graphene-Coated Microfiber Bragg Grating Structures for Ammonia Gas Sensing

A Facile Way to Improve the Sensing Performance of CVD Graphene

Preparation and Test of NH3 Gas Sensor Based on Single-Layer Graphene Film

Metal Decoration Effects on the Gas-Sensing Properties of 2D Hybrid-Structures on Flexible Substrates

Unique Modulation Effects of Performance of Graphene-Based Ammonia Sensors via Ultrathin Bimetallic Au/Pt layers & Gate Voltages

Nitrogen-doped graphene network supported copper nanoparticles encapsulated with graphene shells for surface-enhanced Raman scattering

Highly Dispersive Ag Nanoparticles on Functionalized Graphene for an Excellent Electrochemical Sensor of Nitroaromatic Compounds

Ag Decorated CuGaO2 Nanosheets for Enhanced Ethylene Glycol Detection

Developing Graphene-based Nanohybrids for Electrochemical Sensing

Effective Room-Temperature Ammonia-Sensitive Composite Sensor Based on Graphene Nanoplates and PANI

Highly Sensitive Surface Enhanced Raman Spectroscopy from Ag Nanoparticles Decorated Graphene Sheet