Abstract:Influence of temperature and humidity on the stress‐strain curves of flax fiber composites using untreated, sodium hydroxide‐, silane‐ or siloxane‐modified flax fibers as reinforcements. Natural fibers are a sustainable alternative to synthetic fibers due to their high weight‐specific Young's moduli and strengths. However, the mechanical properties of natural fibers are very sensitive to their moisture content. Therefore, chemical treatments are often applied to natural fibers to lower their water absorption and enhance fiber‐matrix interaction. The aim is to study the effects of fiber modifications with sodium hydroxide, silane, and siloxane on the water uptake and tensile properties of flax fiber composites produced via prepreg technology. In addition, the effect of moisture on the composites' tensile properties was investigated by conditioning one part of the tensile specimens according to DIN EN 2823 (at 70°C and 85% relative humidity). The NaOH treatment was the only modification that had positive effects on the Young's modulus and tensile strength in the unconditioned and conditioned state. The increase of the tensile modulus and strength are most likely due to changes in flax fiber composition, crystallinity of the cellulose and the rougher fiber surface of NaOH modified fibers. This shows that chemical treatment of natural fibers may improve the performance level of natural fiber composites and prevent a loss in their mechanical properties in humid environments. Highlights Flax fiber modifications with sodium hydroxide, silane, and siloxane. Flax fiber composite production via prepreg technology. Water uptake after conditioning at 70°C and 85% relative humidity. Tensile tests before and after conditioning. SEM images of modified flax fibers.

Enhancement of Tensile Properties of Flax Filaments Through Mercerization under Sustained Tension

Effect of Lye Disposal and Draw on Performance of Floss Silk

Effects of Tension to the Mercerization of Natural Bamboo Fibers

Morphological modification of the technical flax fibre bundles to improve the longitudinal tensile properties of flax fibre reinforced epoxy composites

Chemical and Mechanical Properties Studies of Chinese Linen Flax and Its Composites

Characterization and Properties of Alkali Treated Flax

Characterization of Flax Fibres Modified by Alkaline, Enzyme, and Steam-Heat Treatments

Mechanical property enhancement of flax fibers via supercritical fluid treatment

Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of flax fiber composites

The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites

Mechanical Property Enhancement of Flax Fibre-Based Green Composites for Civil Structural Application

Improved Mechanical Properties of Carbon Nanotubes-Coated Flax Fiber Reinforced Composites

Surface Modification of Flax Yarns by Enzymatic Treatment and Their Interfacial Adhesion with Thermoset Matrices

Retain strength, gain ductility: tough and transparent nanopapers by mercerisation

Evolution of stiffness in flax yarn within flax fiber reinforced composites during moisture absorption

A Review on the Mercerization of Natural Fibers: Parameters and Effects

In Situ Modification of Alginate Fibers by Nano-montmorillonite for Enhancing the Mechanical Properties

Analysis of morphological changes leading to the enhancement of tensile properties of yarns from Manila hemp fiber

Grafting of Nano-Tio2 Onto Flax Fibers and the Enhancement of the Mechanical Properties of the Flax Fiber and Flax Fiber/epoxy Composite

Nanostructural Biochemical Modification Of Flax Fiber In The Processes Of Its Preparation For Spinning

Surface Grafting of Flax Fibres with Hydrous Zirconia Nanoparticles and the Effects on the Tensile and Bonding Properties