Abstract:Magnetic refrigeration technology can achieve higher energy efficiency based on the magnetocaloric effect (MCE). However, the practical application of MCE materials is hindered by their poor mechanical properties, making them challenging to process into devices. Conventional strengthening strategies usually lead to a trade-off with refrigeration capacity reduction. Here, a novel design is presented to overcome this dilemma by forming dual-phase alloys through in situ precipitation of a tough magnetic refrigeration phase within an intermetallic compound with excellent MCE. In the alloy 87.5Gd-12.5Co, incorporating the interconnected tough phase Gd contributes to enhanced strength (approximate to 505 MPa) with good ductility (approximate to 9.2%). The strengthening phase Gd simultaneously exhibits excellent MCE, enabling the alloy to achieve a peak refrigeration capacity of 720 J kg-1. Moreover, the alloy shows low thermal expansion induced by the synergistic effect of the two phases. It is beneficial for maintaining structural stability during heat exchange in magnetic refrigeration. The coupling interaction between the two magnetic phases can broaden the refrigeration temperature range and reduce hysteresis. This study guides the development of new high-performance materials with an excellent combination of mechanical and magnetic refrigeration properties as needed for gas liquefaction and refrigerators. A universal and straightforward method for preparing high-performance magnetocaloric effect (MCE) materials is proposed in this study. By employing a direct melting approach, the magnetocaloric phase precipitates within MCE intermetallic compounds. The prepared dual-phase alloy achieves a commendable equilibrium between refrigeration capacity and mechanical properties. This strategy holds significant promise for the large-scale production of magnetic refrigeration materials. image

Achieving A Table-Like Magnetocaloric Effect and Large Refrigerant Capacity in in Situ Multiphase Gd65mn25si10 Alloys Obtained by Crystallization Treatment

Magnetic Properties and Magnetocaloric Effect of Nd<sub>0.7</sub>Gd<sub>0.3</sub>Mn<sub>2</sub>Si<sub>2</sub> Alloy

Magnetic Properties and Magnetocaloric Effect of Nd0.7Gd0.3Mn2Si2 Alloy

Table-like Magnetocaloric Effect and Enhanced Refrigerant Capacity in Crystalline Gd 55 Co 35 Mn 10 Alloy Melt Spun Ribbons

Table-like Magnetocaloric Effect and Large Refrigerant Capacity in Gd65Mn25Si10-Gd Composite Materials for Near Room Temperature Refrigeration

Effects of Crystallization Treatment on the Structure and Magnetic Properties of Gd65Fe25Zn10 Alloy Ribbons for Magnetic Refrigeration

Magnetic and magnetocaloric properties of GdNi x Al 2− x (0.35 ≤ x ≤ 0.70) alloys with multiphase structure

Enhanced Refrigerant Capacity in Gd-Al-Co Microwires with a Biphase Nanocrystalline/amorphous Structure

Magnetic Properties and Large Magnetocaloric Effects in Amorphous Gd-Al-Fe Alloys for Magnetic Refrigeration

Magnetic Properties and Magnetocaloric Effects of Gd–Mn–Si Ribbons in Amorphous and Crystalline States

Enhanced Magnetocaloric Performance in Nanocrystalline/amorphous Gd3Ni/Gd65Ni35 Composite Microwires

Table-like Magnetocaloric Effect and High Magnetocaloric Response in Gd-Mn-Fe-Al Amorphous/crystalline Dual-Phase System

Structure and magnetocaloric effect of Gd5Si1.975Ge1.975T0.05 (T=Ni, Fe, Cr, Mn, Co) alloys

Magnetocaloric Effect and Critical Behavior in Melt-Extracted Gd60Co15Al25microwires

Amorphous and crystallized (Gd4Co3) 100-xBx alloys for magnetic refrigerants working in the vicinity of 200 K

Excellent Magnetocaloric Properties of Melt-Extracted Gd-based Amorphous Microwires

Design of Excellent Mechanical Performances and Magnetic Refrigeration Via in Situ Forming Dual-Phase Alloys

Table-like Magnetocaloric Effect in the Gd-Co-Al Alloys with Multi-Phase Structure

Comparative Study of the Magnetocaloric Effect in Multiphase Gd Ni Al Alloys: Single Peak Versus Table-Like Profile in Magnetic Entropy Changes

Large Magnetic Refrigerant Capacity in Gd71fe3al26 and Gd65fe20al15 Amorphous Alloys

Giant refrigerant capacity in Gd-based amorphous/nanocrsytalline composite fibers