Abstract:Auxetic honeycombs have a variety of potential applications in aerospace engineering due to their excellent mechanical and multidisciplinary properties. A novel class of auxetic honeycombs have been invented recently named as Re-entrant circular (REC) honeycombs. The REC honeycombs can be obtained by replacing the sloped cell walls of the well-known re-entrant (RE) unit honeycombs with double circular arc walls to dissipate more energy. This study aims to investigate the in-plane dynamic crushing responses of the novel REC honeycombs through numerical simulations and theoretical analyses. LS-DYNA based numerical simulations revealed the "X" and "I" combined deformation mode of the REC honeycomb under low velocity crushing, and the "I" mode under high velocity loading. The geometric parameters of unit cell and the crushing velocity were both found to have great effects on the proximal end crushing stress of the REC honeycomb. It was also shown that the REC honeycomb presents obvious negative Poisson's ratio (NPR) effect, attributed to its re-entrant characteristic. Based on the meso-scale deformation mechanisms of the representative unit cell, theoretical models have been established to predict the plateau stress of the REC honeycomb under different crushing velocities. The theoretical predictions were in good agreement with the numerical simulation results. Moreover, the dynamic sensitivity index and the deformation mode map of the REC honeycomb were obtained to evaluate its dynamic response sensitivity to the loading velocity. Finally, the in-plane crushing characteristics of the REC and the RE honeycombs were compared. The REC honeycomb was found to show higher specific energy absorption (SEA) and penetration resistance than its RE counterpart, due to the more plastic hinges formed during the dynamic crushing process.

Large Deformation Modeling of a Re-Entrant Honeycomb under Tensile Load

In-Plane Compressive Responses of Non-Homogenous Re-Entrant Honeycombs Fabricated by Fused Deposition Modelling Manufactured

Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb

The Effective In-Plane Elastic Properties of Hexagonal Honeycombs with Consideration for Geometric Nonlinearity

Crushing performance of a novel tetra-missing rib honeycomb: Experimental and numerical studies

On In-Plane Crushing Behavior of a Combined Re-Entrant Double-Arrow Honeycomb

Plastic Analyses of Thin-Walled Steel Honeycombs with Re-Entrant Deformation Style

In-plane crushing behavior of a novel re-entrant diamond-shaped honeycomb and its variant structures

Dynamic crushing response of novel re-entrant circular auxetic honeycombs: Numerical simulation and theoretical analysis

The compressive responses and failure behaviors of composite graded auxetic re-entrant honeycomb structure

Crushing Response and Optimization of a Modified 3D Re-Entrant Honeycomb

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

Design and mechanical analysis of deformable honeycomb structures

The Structure Response of Sandwich Beams with Metallic Auxetic Honeycomb Cores under Localized Impulsive Loading-Experiments and Finite Element Analysis

Nonlinear Mechanics of a Thin-Walled Honeycomb with Zero Poisson’s Ratio

Insight into the Negative Poisson's Ratio Effect of Metallic Auxetic Reentrant Honeycomb under Dynamic Compression

Fabrication and In-Plane Compressive Collapse of CFRP Honeycomb Metamaterials

Comparative Study of the In-Plane Uniaxial and Biaxial Crushing of Hexagonal, Re-Entrant, and Mixed Honeycombs

Numerical Modeling of Elastic Modulus and Bucking Load of Honeycombs

Experimental and Numerical Research on Foam Filled Re-Entrant Cellular Structure with Negative Poisson's Ratio

In-plane crushing behaviour of hierarchical honeycombs: finite element simulation and analytical modelling