Dielectric-grating-coupled Surface Plasmon Resonance for Ultrasensitive Sensing

Shaohua Pi,Xie Zeng,Nan Zhang,Dengxin Ji,Haoming Song,Suhua Jiang,Qiaoqiang Gan

DOI: https://doi.org/10.1364/fio.2016.jw4a.30

2016-01-01

Abstract:We proposed a dielectric grating that can launch surface plasmon resonance mode efficiently on the other side of flat metal films with normal incident light, which is suitable for the integration with optical fiber tips.

What problem does this paper attempt to address?

Dielectric-Grating-Coupled Surface Plasmon Resonance from the Back Side of the Metal Film for Ultrasensitive Sensing

Shaohua Pi,Xie Zeng,Nan Zhang,Dengxin Ji,Borui Chen,Haomin Song,Alec Cheney,Yun Xu,Suhua Jiang,Dalin Sun,Yun Song,Qiaoqiang Gan

DOI: https://doi.org/10.1109/jphot.2015.2509870

IF: 2.4

2016-01-01

IEEE Photonics Journal

Abstract:We propose a dielectric grating that can launch surface plasmon resonance (SPR) modes efficiently on the other side of flat metal films, which is similar to the conventional prism coupling mechanism. Importantly, this structure can excite SPR under the normal incident light, which is particularly suitable for the integration with optical fiber tips. By launching the SPR mode near the wavelength of 1.55 mu m with a very narrow resonance line width (similar to 4 nm), this structure is promising for the development of high-performance portable, flexible, and real-time refractometric sensing applications.
Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

Jun Zhu,Liuli Qin,Shuxiang Song,Junwen Zhong,Siyuan Lin

DOI: https://doi.org/10.1007/s13320-015-0244-1

2015-01-01

Abstract:Nowdays, the study of measurement of the biological field focuses on the research of improving surface plasmon resonance (SPR) in the fields of integration and detection sensitivity. We designed a kind of grating connected surface plasmon resonance sensor. Theoretically, we analyzed the wave vector and the effective refractive index relations with the diffraction grating structure. Then we obtained the nanoparticles enhancement SPR structure with a resolution 10 times higher than that of traditional SPR sensors. Also, we used the finite-difference time-domain (FDTD) analysis and simulation which showed that it was obvious with coupling effect by the nanoparticles enhancement SPR structure that the reflectance spectral bandwidth results validated the structure significantly which improved the sensitivity. Experimental results showed that the dynamic response of the designed sensor reached 10 −6 RIU (refractive index unit). This study has the certain significance to long-distance and special sensing applications.
Coplanar Excitation of Terahertz Spoof Surface Plasmon and High-Q Sensing

De-xian Yan,Gang Cheng,Er-ping Li,Xiang-jun Li,Xue-ru Zhang,Yi-lin Wu

DOI: https://doi.org/10.37188/co.2022-0204

IF: 1.1

2023-01-01

Chinese Optics

Abstract:In this paper, the coplanar excitation of terahertz Spoof Surface Plasmon (SSP) realized by using a single-layer grating meta-surface coupling method is proposed, which overcomes the disadvantages such as the reflection measurement when applying the medium couplers. The periodic grating and terahertz SSP composite structure are simultaneously constructed on the monolayer metal structure. When the terahertz waves are incident vertically, the wave vector of grating structures and the wave vector of SSPs are matched, and the SSP mode can be excited. The high Q value resonant peaks can be generated in the transmission spectrum, and the Q factor can reach 1 923. The effects of the structural parameters on the grating-coupled meta -surface transmission spectrum and dispersion characteristics are also analyzed. In addition, based on the high Q resonant peak in the transmission spectrum of the designed structure, the high sensing sensitivity is about 67 GHz/RIU at the resonant center frequency of 0.22 THz. The structure proposed in this paper, which realizes terahertz SSP excitation and high Q sensing by treating a single-layer meta-surface structure, exhibits great application potential in many practical applications.
Unidirectional Coupling Of Surface Plasmons With Ultra-Broadband And Wide-Angle Efficiency: Potential Applications In Sensing

kun li,feng xiao,fan lu,kamal alameh,anshi xu

DOI: https://doi.org/10.1088/1367-2630/15/11/113040

2013-01-01

New Journal of Physics

Abstract:A cascaded-grating coupling scheme for unidirectionally coupling and launching surface plasmons from free-space light with ultra-broadband and wide-angle efficiency is proposed and theoretically investigated, and the potential applications in sensing are discussed. The cascaded sub-gratings of different periods couple the incident light over a relatively wide wavelength and angular range into surface plasmon polaritons (SPPs). After traveling a short distance, the SPPs interact with the sensed medium, and then are coupled back into freely propagating light through the nanoslit in the metal film. By observing the changes of SPP-mediated light coupled out through the slit, broadband sensing is achieved. A quantitative theoretical model is developed for performance prediction and validated with aperiodic Fourier modal method. Proof-of-principle demonstrations show that the spectral full-width-half-maximum reaches 400 nm and meanwhile the angular width is up to 25 degrees, both of which are almost four times compared to the reference single-periodic gratings. A wavelength sensitivity as high as 852 nm RIU-1 (RIU, refractive index units) and a relative intensity change up to similar to 5 x 10(4)% RIU-1 are obtained.
Tamm-surface Plasmon Resonances from Nanograting-Coupled Plasmonic-Photonic Multilayer Structure for an Integrated Fiber-Optic Sensing Application

Yuzhang Liang,Xinran Wei,Shuwen Chu,Xin Zhang,Yurui Fang,Wei Peng

DOI: https://doi.org/10.1088/1361-6463/acd7fa

2023-01-01

Journal of Physics D Applied Physics

Abstract:Simultaneous observation of Tamm plasmon (TP) and surface plasmon (SP) resonances has attracted much attention to improve the sensing performance and broaden the application field of plasmonic biosensors. Currently, enormous efforts are being devoted to simultaneously excite both SP and TP modes by exploiting total internal reflection. However, this method requires a bulky and complicated prism or microscopy setup to fulfill the phase-matching condition, limiting the miniaturization and integration of sensors. Herein, we propose and theoretically demonstrate a nanograting-coupled plasmonic-photonic multilayer structure potentially integrated on the optical fiber tip, comprising a multilayer of photonic crystal (PC) inserted between a flat gold film and a gold nanograting. The proposed plasmonic-photonic multilayer structure enables the simultaneous excitation of TP and SP modes at the normal incidence by using the zeroth and first-order diffraction light of the nanograting, respectively. The resonant positions of both SP and TP modes can be independently adjusted by changing the nanograting period and the center wavelength of the PC bandgap. Due to the insensitivity of the TP mode to ambient surroundings, the proposed structure can be served as a self-reference SP resonance sensor for robust measurement where the sensitivity of the SP resonance sensor is determined by the wavelength shift of SP mode relative to TP mode. Moreover, the spectral overlapping of both TP and SP modes results in the abrupt change of reflection intensity, which enables a rapid judgment to the refractive index of ambient surroundings by observing the red or blue shifts of SP resonant position relative to the case of TP. The simultaneous excitation of both TP and SP modes in the proposed structure opens a new path for improving detection accuracy and broadening application scenarios of fiber-optic SP resonance sensors.
Fiber Grating-Assisted Surface Plasmon Resonance for Biochemical and Electrochemical Sensing

Tuan Guo

DOI: https://doi.org/10.1109/jlt.2016.2590879

IF: 4.7

2016-01-01

Journal of Lightwave Technology

Abstract:Surface plasmon resonance (SPR) optical fiber sensors can be used as a cost-effective and relatively simple-to-implement alternative to well established bulky prism configurations for in situ high sensitivity biochemical and electrochemical measurements. The miniaturized size and remote operation ability offer them a multitude of opportunities for single-point sensing in hard-to-reach spaces, even possibly in vivo . Grating-assisted and polarization control are two key properties of fiber-optic SPR sensors to achieve unprecedented sensitivities and limits of detection. The biosensor configuration presented here utilizes a nanoscale metal-coated tilted fiber Bragg grating (TFBG) imprinted in a commercial single-mode fiber core with no structural modifications. Such sensor provides an additional resonant mechanism of high-density narrow cladding mode spectral combs that overlap with the broader absorption of the surface plasmon for high accuracy interrogation. In this paper, we briefly review the principle, characterization and implementation of plasmonic TFBG sensors, followed by our recent developments of the “surface” and “localized” affinity studies of the biomolecules for real life problems and the electrochemical actives of electroactive biofilms for clean energy resources.
Implementation and phase detection of dielectric-grating-coupled surface plasmon resonance sensor for backside incident light

Wen-Kai Kuo,Jaturon Tongpakpanang,Ping-Hong Kuo,Sheng-Feng Kuo

DOI: https://doi.org/10.1364/OE.27.003867

2019-02-18

Abstract:This paper proposes a design for a dielectric-grating-coupled surface plasmon resonance (SPR) sensor that can be fabricated using a low-cost nanoimprint process and exhibits a high phase detection sensitivity when light is incident on the backside of the sensor and does not pass through the analyte on the front-side of the sensor. A low-refractive-index material (mesoporous silica) is utilized to implement a reverse symmetric waveguide structure that can enhance electric-field strength on the sensor surface and improve detection sensitivity. A sol-gel method is used to fill the groove of the grating structure with a high-refractive-index material (titanium dioxide), and surface smoothness is improved via a flat silicon impression mold. The experimental results indicate that although the sensor device exhibits defects and non-smooth surface relief, phase detection sensitivity can still be achieved as high as 2 × 10-5 RIU by using an electro-optic heterodyne interferometer.
Surface Plasmon Resonance for Sensing

Zhihong Chen,Chun Jiang

DOI: https://doi.org/10.1109/nusod.2012.6316518

2012-01-01

Abstract:We design a structure consisting of Ag strip pair arrays embedded in the background material to achieve localized surface plasmon resonance. Numerical simulation shows that one of the transmission dips of the structure is very sensitive to the background materials, which can be used to achieve high performance sensors.
High Sensitive Sensing Characteristics of Surface Plasmon Coupling Gratings

Rui Ma,Yumin Liu,Zhongyuan Yu

DOI: https://doi.org/10.1364/acpc.2015.asu2a.147

2015-01-01

Abstract:We propose an application of end-fire coupling gratings as sensor of refractive index. The sensitivity can reaching more than 2000 nm/RIU. This work has potential for designing refractive index sensors and other surface plasmon devices.
A Quasi-3D Fano Resonance Cavity on Optical Fiber End-Facet for High Signal-to-noise Ratio Dip-and-read Surface Plasmon Sensing

Xiaqing Sun,Zeyu Lei,Hao Zhong,Chenjia He,Sihang Liu,Qingfeng Meng,Qingwei Liu,Shengfu Chen,Xiangyang Kong,Tian Yang

DOI: https://doi.org/10.37188/lam.2022.046

2022-01-01

Light Advanced Manufacturing

Abstract:Surface plasmon devices mounted at the end-facets of optical fibers are appealing candidates for rapid and point-of-care sensing applications, by offering a special dip-and-read operation mode. At present, these devices’ noise-equivalent limits-of-detection lag far behind the free-space counterparts, leaving them incapable of most biosensing applications. Here we report a quasi-3D Fano resonance cavity and its fabrication method to fundamentally improve the quality factor and coupling efficiency for fiber-coupled surface plasmon resonance. In this device, the Fano resonance combines the high coupling efficiency of a Fabry-Pérot etalon and the high quality factor resonance of a plasmonic crystal cavity. The quasi-3D device was fabricated on a planar substrate and transferred to a single-mode fiber end-facet, which requires a low-adhesion yet surface-plasmon-tunneling interface between the device and the planar substrate. Such an interface was realized with a nanocap-slit unit structure, of which the plasmonic crystal was consisted. A noise-equivalent limit of detection of ~ 10-7 RIU was experimentally obtained, allowing bovine serum albumin physical adsorption to be distinguished at ng mL-1 level concentrations. Therefore, breaking through the long-standing signal-to-noise ratio bottleneck, this work makes fiber end-facet surface plasmon devices into one of high sensitivity label-free sensing technologies. At the same time, it provides an enabling top-down fabrication technology for making 3D plasmonic structures on fiber end-facets at the nanometer scale.
U-Shaped Photonic Crystal Fiber Based Surface Plasmon Resonance Sensors

Shu Ge,Fukun Shi,Guiyao Zhou,Songhao Liu,Zhiyun Hou,Lu Peng

DOI: https://doi.org/10.1007/s11468-015-0176-z

IF: 2.726

2016-01-01

Plasmonics

Abstract:A surface plasmon resonance sensor based on a U-shaped photonic crystal fiber with a rectangular lattice has been designed through finite element method. The U-shaped fiber exhibits not only stronger mechanical strength but also better sensor performance than our previous scheme. The upper detection limit extends to higher analyze refractive index, 1.384, for phase interrogation. We introduce a ratio to evaluate the impact of higher order plasmonic mode. For wavelength modulation scheme, the parameter to describe the performance of a sensor is chosen to be the figure of merit, which can be up to 533.8[RIU −1 ] around complete coupling condition.
Helicoid Grating-Coupled Surface Plasmon Resonance Sensor

Ryeong Myeong Kim,Soo Min Lee,Jeong Hyun Han,Sung Hoon Cho,Jiawei Lv,Sang Won Im,In Han Ha,Yoon Ho Lee,Daeyoon Lim,Hyeohn Kim,Nam Heon Cho,Hye-Eun Lee,Seok Daniel Namgung,Ki Tae Nam

DOI: https://doi.org/10.1021/acs.nanolett.4c04212

IF: 10.8

2024-11-06

Nano Letters

Abstract:Ultrasensitive, rapid, and reliable biomolecular sensing is essential for biomedical diagnostics, requiring real-time monitoring and detection of trace samples. Optical sensing, particularly plasmonic biosensing, meets these demands through noninvasive, high-sensitivity detection based on the interaction between light and molecules. Here, we present novel plasmonic metamaterial-based sensing strategy, utilizing the circular dichroism (CD) response of grating-coupled surface plasmon resonance...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Transmission-type SPR Sensor Based on Coupling of Surface Plasmons to Radiation Modes Using a Dielectric Grating

Changkui Hu,Deming Liu

DOI: https://doi.org/10.1007/s12200-009-0040-x

2009-01-01

Frontiers of Optoelectronics

Abstract:A transmission-type surface plasmon resonance (SPR) sensor is presented. In the transmission-type SPR structure, surface plasmon waves are outcoupled to radiation modes by the use of dielectric grating on a thin-film layer of Ag. Compared with the traditional reflection-type SPR sensor, the new method provides larger detectable range, which might be useful to investigate thick targets such as in cell analysis. Theoretical simulations show that the structures provide high transmission efficiency for surface plasmon resonance and the devices present extremely linear sensing characteristics. Furthermore, it is found that the transmission efficiency and the refractive index detection sensitivity of the SPR sensor can be improved by the use of a lower refractive index glass prism.
Dielectric nanocavity-coupled surface lattice resonances for high-efficiency plasmonic sensing

Jinyong Hu,Chuxuan Tan,Wangdi Bai,Yiming Li,Qi Lin,Lingling Wang

DOI: https://doi.org/10.1088/1361-6463/ac31f2

2021-11-09

Abstract:Abstract Surface lattice resonances (SLRs) arising in metal nanostructure arrays have shown tremendous application prospects in the field of plasmonic biosensing. However, these SLRs still suffer from poor optical properties, such as broad linewidth or weak resonance intensity that is especially excited under normal incidence and asymmetric environments, which hinder further practical applications. Herein, we theoretically propose an effective strategy to tailor the SLRs performance of metal nanostructure arrays by introducing a dielectric nanocavity. Originating from the strong interference between the in-plane lattice resonance mode and plasmonic gap cavity modes, the dielectric nanocavity-mediated gold nanostructure arrays exhibit both narrow spectral features with a linewidth of ∼8.2 nm and strong resonance intensity with absorbance amplitude exceeding 95%, even though under normal incidence and asymmetric environment excitation. The simulation results then show that the sensitivity and the figure of merit can reach up to 527.5 nm RIU −1 and 64.3, respectively, as for plasmonic refractive index sensing. This work not only paves the way toward the achievement of effective control of in-plane SLRs, but also provides a potentially attractive candidate for the development of high-efficiency plasmonic sensors.
Ultrahigh sensitive surface plasmon sensor using a nanofilm coated D-type photonic crystal fiber

Xuanyi Liu,G. Melwin,M. S. Aruna Gandhi,H. Y. Fu,P. Ramesh Babu,K. Senthilnathan,Qian Li

DOI: https://doi.org/10.1364/AO.418191

IF: 1.9

2021-01-01

Applied Optics

Abstract:We investigate a novel, to the best of our knowledge, D-type photonic crystal fiber-based refractive index microbiosensor that works on surface plasmon resonance. We study the performance of the proposed sensor using the finite element method. Further, we analyze the influence of various materials, namely, gold, silver, and indium tin oxide that are deposited on the D-type fiber surface. Of these metals, gold has been examined to be advantageous owing to its enhanced sensitivity and greater chemical stability. The proposed microbiosensor exhibits a high wavelength sensitivity of 19,000 nm/RIU in the sensing range of 1.40-1.41, and its wavelength interrogation resolution is 5.26 x 10(-6) RIU. Besides, this novel scheme provides a high amplitude sensitivity of 569 RIU-1 with the corresponding resolution of 2.63 x 10(-6) RIU. Further, the linearity of the proposed microbiosensor, R-2, is 0.9745 in the sensing environment of the refractive index ranging between 1.31 and 1.40. Finally, optimizing the metal coating thickness, diameter of the air-hole, and the lattice pitch of the proposed sensor have been conducted systematically, in order to augment the sensing performance of the proposed sensor. We foresee that the proposed microbiosensor would turn out to be an appropriate candidate in sensing the analyzes of high refractive index. (C) 2021 Optical Society of America
Optical Cavity-Enhanced Localized Surface Plasmon Resonance for High-Quality Sensing

Jing Chen,Qian Zhang,Cheng Peng,Chaojun Tang,Xueyang Shen,Licheng Deng,Gun-Sik Park

DOI: https://doi.org/10.1109/lpt.2018.2814216

IF: 2.6

2018-01-01

IEEE Photonics Technology Letters

Abstract:We report an effective strategy to enhance the localized surface plasmon resonances (LSPRs) of metallic nanoparticles by introducing a Fabry-Perot (FP) cavity for high-quality sensing. The concept is based on the combined excitation of LSPRs in metallic nanoparticles and optical cavity modes supported by the FP cavities, whose strong interactions result in two ultra-narrowband hybridized plasmon modes with a huge electric field enhancement. A high-quality double-band plasmonic nanosensor, with the refractive index sensitivity approaching 600 nm/RIU and a figure of merit exceeding 28 is achieved here, which suggests that the cavity-coupling strategy could offer new perspectives for achieving ultra-compact efficient biosensors.
A Flat Plasmonic Biosensing Interface on Optical Fiber End-Facet via SPP-MIM Hybridization

Chenjia He,Xiaqing Sun,Hao Zhong,Qingfeng Meng,Xuetong Zhou,Sihang Liu,Li Zheng,Xiangyang Kong,Shengfu Chen,Shengce Tao,Tian Yang

2024-10-19

Abstract:We found that the specific dispersion of metal-insulator-metal (MIM) waveguide allows the hybridization of surface plasmon polaritons (SPPs) and the waveguide, which is not possible with dielectric waveguides. The SPP-MIM hybridization structure forms such a meta-film that integrates the previously incompatible respective merits of SPR and LSPR, including flat interfaces, high sensitivities, short evanescent fields and easy coupling with confined light. On the other hand, to achieve stable and reproducible performance is one of the greatest unresolved challenges for the development of nanophotonic biosensors. We point out that the key is to obtain well-controlled biomolecular behaviors using simple physical interfaces, for which the SPP-MIM meta-film provides a capable solution. We embed the SPP-MIM meta-film with a plasmonic crystal cavity and integrate it on a single-mode fiber's end-facet to detect biomolecular interactions. This device demonstrates highly reproducible sensorgrams and convincing detection of biotinylated proteins at down to 30 fM, with the sensorgrams following the Langmuir model. By unprecedentedly having both high sensitivity and high reproducibility, our device proposal provides a comprehensive solution for optical fiber-tip plasmonic devices to turn into a useful industrial biosensing technology.

Optics
Surface Plasmon Polaritons Enhanced Magnetic Plasmon Resonance for High-Quality Sensing

Jing Chen,Lu Cheng,Lianjie Zhao,Ping Gu,Zhendong Yan,Chaojun Tang,Fan Gao,Mingwei Zhu

DOI: https://doi.org/10.35848/1882-0786/aca316

IF: 2.819

2022-01-01

Applied Physics Express

Abstract:We investigate the metamaterials consisting of top layer U-shaped metallic split-ring resonators, the middle thin dielectric layer, and the bottom thick metal film, which can realize high-quality refractive index sensing. When propagating surface plasmon polaritons are introduced, two ultra-narrow-band hybridized modes will appear, whose full width at half maximum can reach up to 2.5 nm. Because of the ultra-narrow linewidth and huge magnetic field enhancement at hybridized modes, the metamaterials display very high sensitivity (S = 912 nm RIU-1, S* = 95.64 RIU-1) and large figure of merit (FOM = 364.8, FOM*= 160 740.34), which has great potential in label-free biomedical sensing.
Ultrathin plasmonic nanogratings for rapid and highly-sensitive detection

Beibei Zeng,Yongkang Gao,Filbert J. Bartoli

DOI: https://doi.org/10.48550/arXiv.1410.3716

2014-10-14

Optics

Abstract:We developed a nanoplasmonic sensor platform employing the extraordinary optical properties of one-dimensional nanogratings patterned on 30nm-thick ultrathin Ag films. Excitation of Fano resonances in the ultrathin Ag nanogratings results in transmission spectra with high amplitude, large contrast, and narrow bandwidth, making them well-suited for rapid and highly-sensitive sensing applications. The ultrathin nanoplasmonic sensor chip was integrated with a polydimethylsiloxane (PDMS) microfluidic channel, and the measured refractive index resolution was found to be 1.46x10-6 refractive index units (RIU) with a high temporal resolution of 1 sec. This compares favorably with commercial prism-based surface plasmon resonance sensors, but is achieved using a more convenient collinear transmission geometry and a significantly smaller sensor footprint of 50x50um2. In addition, an order-of-magnitude improvement in the temporal and spatial resolutions was achieved relative to state-of-the-art nanoplasmonic sensors, for comparable detection resolutions.
Surface Plasmon Sensor Based on Bilayer Metallic Nanowire Grating

She Yi,Lindong Guo,Nanling Sun,Jun Zhen,Zhicheng Ye

DOI: https://doi.org/10.1364/n3.2013.nsu1b.2

2013-01-01

Abstract:A bilayer metallic grating was fabricated by laser interfere lithography and E-beam evaporation. The lateral-guiding mode resonances excite a sharp peak in the reflection spectrum, which is red shifted with the increase of reflective index and incident angles for sensors.

Dielectric-grating-coupled Surface Plasmon Resonance for Ultrasensitive Sensing

Dielectric-Grating-Coupled Surface Plasmon Resonance from the Back Side of the Metal Film for Ultrasensitive Sensing

Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

Coplanar Excitation of Terahertz Spoof Surface Plasmon and High-Q Sensing

Unidirectional Coupling Of Surface Plasmons With Ultra-Broadband And Wide-Angle Efficiency: Potential Applications In Sensing

Tamm-surface Plasmon Resonances from Nanograting-Coupled Plasmonic-Photonic Multilayer Structure for an Integrated Fiber-Optic Sensing Application

Fiber Grating-Assisted Surface Plasmon Resonance for Biochemical and Electrochemical Sensing

Implementation and phase detection of dielectric-grating-coupled surface plasmon resonance sensor for backside incident light

Surface Plasmon Resonance for Sensing

High Sensitive Sensing Characteristics of Surface Plasmon Coupling Gratings

A Quasi-3D Fano Resonance Cavity on Optical Fiber End-Facet for High Signal-to-noise Ratio Dip-and-read Surface Plasmon Sensing

U-Shaped Photonic Crystal Fiber Based Surface Plasmon Resonance Sensors

Helicoid Grating-Coupled Surface Plasmon Resonance Sensor

Transmission-type SPR Sensor Based on Coupling of Surface Plasmons to Radiation Modes Using a Dielectric Grating

Dielectric nanocavity-coupled surface lattice resonances for high-efficiency plasmonic sensing

Ultrahigh sensitive surface plasmon sensor using a nanofilm coated D-type photonic crystal fiber

Optical Cavity-Enhanced Localized Surface Plasmon Resonance for High-Quality Sensing

A Flat Plasmonic Biosensing Interface on Optical Fiber End-Facet via SPP-MIM Hybridization

Surface Plasmon Polaritons Enhanced Magnetic Plasmon Resonance for High-Quality Sensing

Ultrathin plasmonic nanogratings for rapid and highly-sensitive detection

Surface Plasmon Sensor Based on Bilayer Metallic Nanowire Grating