Abstract:Gas-liquid membrane contactors are frequently proposed as promising alternative for traditional ozone injection methods in water treatment. However, information on successfully implemented large-scale applications is scarce. This review discusses the state of research of ozone membrane contactors for water and wastewater applications with a focus on material stability, mass transfer performance and process design. It aims to identify favorable operating conditions, the benefits compared to traditional injection methods and critical aspects for upscaling. Reported experimental ozone mass transfer coefficients (K) in hollow fiber and single tube contactors were analyzed for relevant influential parameters and compared to calculations using the Lévêque solution and the Kreulen modification. Volumetric mass transfer coefficients (Kas) were used for comparison with other ozone delivery methods. Differences between experimental and calculated mass transfer coefficients increased towards lower mass transfer and liquid velocity, potentially due to enhanced membrane resistances and ozone decay. The highest mass transfer coefficients were found for hydrophobic polyvinylidene fluoride (PVDF) and polytetrafluoroethylene (PTFE) membranes, while polydimethylsiloxane (PDMS), hydrophilic PVDF, and inorganic membranes showed lower transfer efficiencies. Although mass transfer enhancement by fast ozone depletion in the liquid bulk and in the boundary layer can be significant during water treatment, this design-factor is mostly neglected for ozone membrane contactors examined in the peer-reviewed literature. PVDF and PTFE hollow fiber modules exhibit higher volumetric mass transfer coefficients compared to traditional injection methods including bubble columns and venturi injectors, but full-scale and economic studies are missing to assess potential benefits of this new ozone injection method. In addition, long-term material stability is uncertain for most materials. Overall, this study provides a comprehensive comparison of gas–liquid contactors, suggesting future areas of research.

Studies on Ozone Mass Transfer with High Dissolved Concentration

Effect Of The Scale-Up Process On The Reactor Performance Within The Riser: Simulation Using Ozone Decomposition

Enhancement of Ozone Mass Transfer by Stainless Steel Wire Mesh and Its Effect on Hydroxyl Radical Generation

Design and simulation of miniature vibrating electric field sensors

Using in-line static mixers to intensify gas–liquid mass transfer processes

Process intensification of the ozone-liquid mass transfer in ultrasonic cavitation-rotational flow interaction coupled-field: Optimization and application

Ozone microbubbles treatment with different gas-liquid mixing conditions and its application on printing and dyeing wastewater and Escherichia coli

Modeling investigation of mass transfer of gas-liquid-liquid dispersion systems

Investigation of surfactant effect on ozone bubble motion and mass transfer characteristics

Using a membrane contactor for ozone mass transfer study and model dye wastewater treatment

Microbubble-Dominated Mass Transfer Intensification in the Process of Ammonia-Based Flue Gas Desulfurization

Ozone Mass Transfer Behaviors on Physical and Chemical Absorption for Hollow Fiber Membrane Contactors.

Process intensification of H2O2 extraction using gas–liquid–liquid microdispersion system

Investigation of Mass Transfer of Ozone in Jet Loop Reactor

Ozone membrane contactors for water and wastewater treatment: A critical review on materials selection, mass transfer and process design

Effect of inlet ozone concentration on the performance of a micro-bubble ozonation system for inactivation of Bacillus subtilis spores

Microinterface Intensification in Hydrogenation and Air Oxidation Processes

The dynamics and transport of ozone in the gas and liquid phase generated by air surface microdischarge plasma at atmospheric pressure

Evaluating Dissolved Ozone in a Bubble Column Using a Discrete-Bubble Model

Experimental Research for the Simultaneous Removal of NOx and SO2 in Flue Gas by O3

Evaluating Effective Volume and Hydrodynamic Behavior in a Full-Scale Ozone Contactor with Computational Fluid Dynamics Simulation