Abstract:Different types and amounts of steel fibers have varying effects on the improvement of concrete's mechanical properties. In order to identify the most suitable steel fiber types for the practical production of prefabricated pavements and derive a formula to predict and evaluate the mechanical properties based on steel fiber volume fraction, this study conducted experimental research on the physical mechanical properties of concrete using the method of equal volume substitution of coarse aggregate. The influence of steel fiber type and volume fraction on the microstructure and failure mechanism of steel fiber reinforced concrete (SFRC) was analyzed through electron microscopy scanning. The mechanical properties of plain concrete were used as benchmark. The results showed that when the steel fiber volume fractions were 0.6% and 1.5%, the bending and split tensile strengths of milled steel fibers were 3.1% higher than those of hooked-end steel fibers and the compressive strength of SFRC was significantly increased by 13.5%. The comprehensive mechanical properties of wave-shaped steel fibers were inferior to the first two types. Considering the requirements of SFRC in engineering, milled steel fibers are more suitable to be concrete components. This is because the tangling property of the hooked-end steel fibers makes them difficult to be shaped. In contrast, the smooth surface of milled steel fibers exerts a smaller impact on the forming of specimen and they are more economical. The mechanical properties of SFRC improve as the volume fraction of steel fibers increases from 0% to 2%, but start to decline when the volume fraction exceeds 2%. A volume fraction of 0.6% for steel fibers is sufficient to meet the standard for bending and tensile strength in heavy-duty concrete pavements. Finally, the relationship expressions between the compressive strength, flexural strength, and split tensile strength of SFRC and the steel fiber volume fraction were obtained through fitting the experimental data using Origin software.

Workability, Strength and Shrinkage of Fiber Reinforced Expansive Self-Consolidating Concrete

Experimental study on effects of polypropylene fiber on early-age shrinkage in concrete

Mechanical Properties and Axial Compression Deformation Property of Steel Fiber Reinforced Self-Compacting Concrete Containing High Level Fly Ash

Influences of Fiber Content on Properties of Self‐compacting Steel Fiber Reinforced Concrete

Properties of High-Content Micro-Steel Fiber Self-Compacting Concrete Incorporating Fly Ash and Slag Powder Performance Study

Mechanical and shrinkage performance of steel fiber reinforced high strength self-compacting lightweight concrete

Experimental study and numerical simulation of the effect of different fiber types on the basic mechanical properties of shotcrete

Effect of Cabon Fiber-Reinforced Polymer Layout on Mechanical Properties of Expansive Concrete Beams

Workability and mechanical behavior of steel fiber reinforced self-compacting concrete with supplementary cementitious materials

Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers

The Effects of Steel Fiber Types and Volume Fraction on the Physical and Mechanical Properties of Concrete

Effect of fiber hybridization on mechanical properties of concrete

Influence of Polypropylene and Steel Fibers on the Performance and Crack Repair of Self-Compacting Concrete

Investigating the Effect of Various Fibers on Plasticity and Compressive Strength of Concrete Samples

Workability and Mechanical Properties of Polypropylene Fiber Reinforced Concrete

High-flowable and High-Performance Steel Fiber Reinforced Concrete Adapted by Fly Ash and Silica Fume

Comparing and evaluating influence of nylon fiber and fly ash in self compacting concrete

Mechanical properties and corrosion resistance of high performance fiber-reinforced concrete with steel or amorphous alloy fibers

Effect of fiber type, shape and volume fraction on mechanical and flexural properties of concrete

Effect of Steel Fiber Content on Shear Behavior of Reinforced Expanded-Shale Lightweight Concrete Beams with Stirrups

Study on the effectiveness of fibre reinforcement on the engineering performance of foamed concrete