Abstract:With the fast development of full-field vibration measurements by combining digital image correlation (DIC) technique with the integrated highspeed camera system, the structural characteristic deflection shapes (CDS’s) can be readily captured, which are sensitive for damage localization. Naturally, the mode shapes are preferred due to their higher signal to noise ratio. However, traditional modal analysis methods are inefficient in processing the large volumes of data that acquired by high-speed camera system for mode shape-based damage localization. Moreover, how to extract the damage features and enhance the damage localization results without the baseline-data of the intact state is another challenging issue. To address these problems, a novel damage localization method is proposed by enhancing the mode shape estimation and optimizing the damage feature extraction. Firstly, the dominant singular vector at each interested resonant frequency is individually evaluated as the mode shapes in the proposed time domain decomposition (TDD) method. Moreover, based on the extracted mode shapes, a pseudo-excitation (PE) method is proposed to reveal the damage locations without baseline-data by examining the perturbation of local dynamic equilibrium. To circumvent the effects of measurement noise on PE method, an adaptive denoising technique is proposed based on Gaussian smoothing. Furthermore, the local contiguity and spatial sparsity of the damage-caused features are harnessed by a hierarchical clustering to optimize the damage localization performance via tuning the scale parameter of Gaussian smoothing. Finally, numerical and experimental studies of crack damaged plates are conducted to validate the feasibility and effectiveness of the proposed mode shape estimation and damage localization methods. During the experiment, the full-field vibration measurements are acquired by using an integrated binocular highspeed camera system. In addition, a comparison study based on benchmark data is carried out to demonstrate the performance and reliability of the proposed damage localization method.

Robust Structural Damage Detection and Localization Based on Joint Approximate Diagonalization Technique in Frequency Domain

Multi-damage Identification Based on Joint Approximate Diagonalisation and Robust Distance Measure

Output-Only Damage Identification Using Enhanced Structural Characteristic Deflection Shapes and Adaptive Gapped Smoothing Method

Robust Multi-Damage Localisation Using Common Eigenvector Analysis and Covariance Matrix Changes

Baseline-free Multidamage Identification in Plate-Like Structures by Using Multiscale Approach and Low-Rank Modelling

Baseline-free Adaptive Damage Localization of Plate-Type Structures by Using Robust PCA and Gaussian Smoothing

Adaptive Damage Localization Based on Locally Perturbed Dynamic Equilibrium and Hierarchical Clustering

Singular Spectrum Analysis Based Structural Damage Detection from Nonlinear Vibration Measurements Containing Noise

Structural damage identification using static test data and changes in frequencies

Dynamic Perturbation Characteristics for Non-Baseline Structural Damage Diagnosis

Identification of structural damage based on locally perturbed dynamic equilibrium with an application to beam component

Structural Damage Identification Based On The Anti-Resonant Frequency And Least Square Algorithm

Structural damage detection based on stochastic subspace identification and statistical pattern recognition: I. Theory

Structure damage detection method based on singular value decomposition and proper orthogonal decomposition

Intelligent Damage Detection of Frames based on Vibration Time-Series Responses

Statistical Moment-Based Structural Damage Detection Method in Time Domain

Damage diagnosis method based on structure response and its application

Robust Baseline-Free Damage Localization by Using Locally Perturbed Dynamic Equilibrium and Data Fusion Technique.

A Novel Time Domain Structural Damage Diagnosis Method Using Jensen-Shannon Divergence

Dynamic-Based Damage Identification Using Neural Network Ensembles and Damage Index Method

Modal Analysis and Damage Localization in Plate-Type Structures Via TDD and PE Methods Based on the Data of an Integrated Highspeed Camera System