Abstract:This research has presented a single-layer metal-backed dipole antenna, which consists of a feedline loaded with two pairs of closely-coupled arc-shaped open stubs, for designing a metal-mountable tag that features tuning capability over a wide range of frequency. Here, the stubs can generate sufficient inductive reactance for bringing down the tag resonant frequency tunable in both the regulated UHF RFID passbands (North American (NA) and Lower European (LEu) standards). Adjusting the stubs’ length can be utilized as a simple and effective tuning mechanism, enabling broadband frequency adjustment in between the two major spectra in a straightforward manner, while maintaining a maximum power transmission coefficient (τ=1). In addition, the proposed antenna structure is easy to construct. The tuning mechanism has enabled the antenna to match well with any commercial RFID chips, and it does not require the use of any external lumped components or shorting elements (vias or stubs). The proposed tag can be easily fabricated using an inexpensive flexible polytetrafluoroethylene (PTFE) substrate, which is broadly adopted by the RFID industry. Stable read performance is achievable, providing freedom of frequency tuning without the need to modify the radiator structure. The volume of the tag is reasonably small: π × (28)2 × 1.5 mm3. It has a measured detection distance is 9.75 m (4 W EIRP) on metal surface in the NA RFID passband while 8.41 m (3.24 W EIRP) in the LEu passband.

Compact Wideband Single-Layer Rfid Tag Antenna Tolerant On Mounting Objects

Compact Broadband Circularly Polarized UHF RFID Tag Antenna for Metallic Mounting

Compact Rfid Tag Antenna with Circular Polarization and Embedded Feed Network for Metallic Objects

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

A novel printed folded dipole antenna used for modern RFID system

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A Low-Profile Metal-backed Dipole Loaded with Closely Coupled Arc-shaped Open Stubs for On-metal Tag Design with Wide Frequency Tuning Capability

Compact Single-Feed Dual-Mode Antenna for Active RFID Tag Application

A Compact UHF-RFID Tag Antenna With Embedded AMC for Metallic Objects

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

A Compact 915 MHz PCB Antenna for RFID Tag

A Dual-Environment Active RFID Tag Antenna Mountable on Metallic Objects

A single port dipole for UHF RFID tag antennas with eliminated read-orientation sensitivity

Three to Two Curve Fractal Folded Dipole Antenna for Rfid Application

A UHF RFID Tag Antenna Placeable on a Metal Surface Without Degraded Performances

Design of Compact Passive Tag Antenna for Practical Rfid Applications

Capacitively loaded, inductively coupled fed loop antenna with an omnidirectional radiation pattern for UHF RFID tags

A Compact and Robust RFID Tag Based on an AMC Structure

An UHF RFID Circularly Polarized Tag Antenna With Long Read Distance for Metal Objects

Broadband UHF RFID Tag Antenna with a Pair of U Slots Mountable on Metallic Objects

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS