Abstract:As emerging and revolutionary alloy materials, high entropy alloys (HEAs) have been extensively studied because of their unique composition, microstructures and excellent mechanical properties and performances. However, there have been limited studies on the deformation behaviors and mechanisms of HEA single crystals at the micro/nanoscale. Here, we fabricated single-crystalline CoCrFeNi HEA pillars with typical orientations of <100>, <110> and <111> and diameters ranging from 272 nm to 1,253 nm and then conducted in situ uniaxial compression tests on these fabricated micro/nanopillars inside a scanning electron microscope. The in situ compression tests showed pronounced size effects on yield and flow stresses in the <100>-, <110>- and <111>-oriented micro/nanopillars, i.e., both yield and flow stresses follow a scaling law with pillar diameter. The scaling exponents of <110>- and <111>-oriented micro/nanopillars are approximately -0.60, which is close to those of face-centered-cubic (FCC) pure metallic micro/nanopillars. However, the <100>-oriented pillars, having a scaling exponent of -0.32∼-0.17, exhibit weaker size effects on yield and flow stresses compared with the <110>- and <111>-oriented micro/nanopillars. Combining observations and analyses using transmission electron microscopy, and large-scale atomistic simulations, we revealed that the nucleation and slip of full dislocations dominate the plastic deformation in the <110>- and <111>-oriented micro/nanopillars, while deformation twinning is a governing mechanism in the <100>-oriented micro/nanopillars. These underlying deformation mechanisms are responsible for the size effects of single-crystalline HEA micro/nanopillars. Large-scale atomistic simulations further reveal that twin nucleation in <100>-oriented pillars is initiated by the slip of pre-existing partial dislocations from an internal source. By considering the free energy change during partial slip, we used a theoretical model to predict the scaling law for the size effects of <100>-oriented micro/nanopillars. The predicted scaling exponent for the size effect of <100>-oriented micro/nanopillars is consistent with our experimental results. Our current study sheds light on the underlying deformation mechanisms in FCC HEA single crystals at the micro/nanoscale, which provides a guide for the design and fabrication of HEAs with high strength and remarkable plasticity.

Size Effects of Shear Deformation Response for Nano-Single Crystals Examined by the Phase-Field-crystal Model

Elastic Strain Response in the Modified Phase-Field-crystal Model

Phase Field Crystal Simulation of Microscopic Deformation Mechanism of Reverse Hall-Petch Effect in Nanocrystalline Materials

The effect of mechanical strains on the ferroelectric and dielectric properties of a model single crystal ? Phase field simulation

Phase Field Crystal Study During Plastic Deformation of Polycrystalline Material

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Multiscale Analysis of Size Effect in Crystalline Solid Dislocation

Strong crystal size effect on deformation twinning

A stochastic crystal plasticity model with size-dependent and intermittent strain bursts characteristics at micron scale

Simulation of uniaxial tensile deformation in nanocrystalline material by phase field crystal method

A phase field model for deformation-induced amorphization

Multistage Microstructural Evolution Caused by Deformation in Two-Mo De Phase Field Crystals

Modeling and Simulation of Microcrack Propagation Behavior under Shear Stress Using Phase-Field-crystal

SIZE EFFECT ON DEFORMATION MODE IN MICRON-SIZED Ti-5Al SINGLE CRYSTAL LOADED ALONG $[2\,\overline 1 \,\overline 1 \,0]$ AND [0001]

Size effects and plastic deformation mechanisms in single-crystalline CoCrFeNi micro/nanopillars

Phase field crystal simulation of stress induced localized solid-state amorphization in nanocrystalline materials.

Size-Induced Strain And Stiffness Of Nanocrystals

Influence of Crystal Structure on Size Dependent Deformation Behavior and Strain Heterogeneity in Micro-Scale Deformation

A multiscale analysis of fixed-end simple shear using molecular dynamics, crystal plasticity, and a macroscopic internal state variable theory

Phase-field Simulation of Effects of Normal Strain on the Morphology and Kinetics Evolution of Nanoscale Phase

A Model Scaling Approach for Fracture and Size Effect Simulations in Solids: Cohesive Zone, Smeared Crack Band and Phase-Field Models