Abstract:Effective control of shale swelling and lost circulation using drilling fluid is considered the dominant strategy for maintaining borehole stability, especially drilling operations in deep oil and gas wells. In this work, a hybrid silicate that contains lithium silicate and potassium methyl silicate (PMS) was employed as a film-forming additive to reduce shale hydration and filtration loss in the high-temperature drilling fluid. Scanning electron microscopy (SEM) results revealed that a dense quartz crystal film coating on the shale can be formed in a hybrid silicate solution when the temperature exceeds 150 °C. The in situ-formed film on the shale surface with a thickness of 60–130 μm was composed of fibrous crystalline silica. Furthermore, the aqueous hybrid silicate exhibited enhanced hydration inhibition ability by preventing water invasion of the formation. Aqueous hybrid silicate with a concentration of 0.5–3 wt % lithium silicate and 0.1–0.2 mol/L PMS was first chosen to obtain the optimum concentration according to the hydration inhibition ability and film formation characteristics. The hybrid silicate was added into a drilling fluid formulation applicable in high-pressure and high-temperature conditions, and the rheological characteristics and filtration properties were investigated. The results confirmed that drilling fluids with the addition of hybrid silicate can mitigate variation of viscosity and yield point before and after aging at 180 and 220 °C. Besides, the filtration behavior was also improved by adding hybrid silicate into the drilling fluid. A lower filtration loss was observed at the concentration of 1.0 wt % lithium silicate and 0.2 mol/L potassium methyl silicate, which showed 63 and 50% HPHT fluid loss reduction for unweighted and weighted formulations at 205 °C and 3.5 MPa, respectively. In addition, the drilling fluid featured stable rheological and filtration properties and excellent shale hydration inhibition characteristics when exposed to high temperatures, making it a promising candidate for drilling in deep oil and gas wells.This article has not yet been cited by other publications.

Influence of an ionic liquid on rheological and filtration properties of water-based drilling fluids at high temperatures

Effect of Ionic Liquids with Different Structures on Rheological Properties of Water-Based Drilling Fluids and Mechanism Research at Ultra-High Temperatures

Experimental Study on the Application of an Ionic Liquid As a Shale Inhibitor and Inhibitive Mechanism

Investigation on Filtration Control of Zwitterionic Polymer AADN in High Temperature High Pressure Water-Based Drilling Fluids

Study of a High-Temperature and High-Density Water-Based Drilling Fluid System Based on Non-sulfonated Plant Polymers

Synthesis of a Novel Filtrate Reducer and Its Application in Water-Based Drilling Fluid for Ultra-High-Temperature Reservoirs

Influence of alkyl chain length in ionic liquid based drilling mud for rheology modification: a review

A zwitterionic copolymer as fluid loss reducer for water-based drilling fluids in high temperature and high salinity conditions

Effect of Synthetic Quadripolymer on Rheological and Filtration Properties of Bentonite-Free Drilling Fluid at High Temperature

Application of Hybrid Silicate as a Film-Forming Agent in High-Temperature Water-Based Drilling Fluids

Synthesis of a Low-Molecular-Weight Filtrate Reducer and Its Mechanism for Improving High Temperature Resistance of Water-Based Drilling Fluid Gel System

An Amphiphilic Multiblock Polymer as a High-Temperature Gelling Agent for Oil-Based Drilling Fluids and Its Mechanism of Action

The effect of high-temperature environment on the rheology and filtration properties of Rhizophora spp. tannin-lignosulfonate as bio-based additive in water-based drilling fluid

Application of zwitterionic copolymer as a filtration control agent against high temperature and high salinity for water-based drilling fluids

Investigation of regulating rheological properties of water-based drilling fluids by ultrasound

The Effects of Organically Modified Lithium Magnesium Silicate on the Rheological Properties of Water-Based Drilling Fluids

A Thermal-Responsive Zwitterionic Polymer Gel as a Filtrate Reducer for Water-Based Drilling Fluids

Effect of Alkylation Chain Length on Inhibiting Performance of Soluble Ionic Liquids in Water-Based Drilling Fluids

A Zwitterionic Copolymer as Rheology Modifier and Fluid Loss Agents for Water-Based Drilling Fluids

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Insight into β-cyclodextrin polymer microsphere as a potential filtration reducer in water-based drilling fluids for high temperature application