Adsorption equilibria and kinetics of CO2, CH4, and N2 on activated carbon and carbon molecular sieve
Si'ang chen,Wenling Wu,Zhaoyang Niu,Kong De-qi,Wenbin Li,Zilong Tang,Donghui Zhang
DOI: https://doi.org/10.21203/rs.3.rs-2910745/v1
2023-01-01
Abstract:Abstract Flue gas and coal bed methane are two important sources of greenhouse gases. Pressure swing adsorption process has a wide range of application in the field of gas separation, and the selection of adsorbent is crucial. In this regard, in order to assess the better adsorbent for separating CO 2 from flue gas and CH 4 from coal bed methane, adsorption isotherms of CO 2 , CH 4 and N 2 on activated carbon and carbon molecular sieve are measured at 303.15, 318.15, and 333.15 K, and up to 250 kPa. The experimental data fits better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models, and Clausius-Clapeyron equation was used to calculate the isosteric heat. Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO 2 > CH 4 > N 2 . The adsorption kinetics are calculated by the pseudo-first kinetic model, and the order of adsorption rates on activated carbon is N 2 ≥ CH 4 > CO 2 , while on carbon molecular sieve it is CO 2 ≥ N 2 > CH 4 . It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon, while kinetic diameter is the main resistance factor for carbon molecular sieve. Moreover, the adsorption selectivity of CH 4 /N 2 and CO 2 /N 2 were estimated with the ideal adsorption solution theory, and carbon molecular sieve performed best at 318.15 K for both CO 2 and CH 4 separation. Overall, the study suggested that carbon molecular sieve is a better option for separating flue gas and coal bed methane.