Abstract:This paper proposes a three-dimensional uniform ultra-high frequency (UHF) near-field radio frequency identification (RFID) reader antenna. The antenna achieves a uniform electric field in the x and y directions by placing a single branch microstrip line along the x-axis and y-axis directions, respectively. It reaches a uniform electric field in the z-direction by a centrosymmetric four-branch microstrip line. The proposed antenna achieves three-dimensional direction uniformity through a reconfigurable method. The impedance matching bandwidth range of S 11 <−10 dB for simulation and measurement includes 0.66 to 0.98 GHz, which can meet the near-field RFID operation frequency band demand. The isolation degrees between ports are less than −24.6 dB within the UHF RFID frequency band (0.86 to 0.96 GHz). In addition, the antenna also has the characteristic of low gain in the far field, and the maximum gain in the far field is less than −27 dBi when operating at different ports. The test results show that the proposed antenna three-dimensional uniform volume of dipole tags above the antenna is 99 mm × 99 mm × 20 mm, and the reading volume of the near-field tags is 40 mm × 40 mm × 5 mm. When the tags are placed on a book, there will be a slight variation in the reading range of the tags.

Compact Tri-Band UHF RFID Tag Antenna for Monza4 Chip

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A Compact UHF-RFID Tag Antenna With Embedded AMC for Metallic Objects

Compact Broadband Circularly Polarized UHF RFID Tag Antenna for Metallic Mounting

Compact Single-Feed Dual-Mode Antenna for Active RFID Tag Application

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS

A novel printed folded dipole antenna used for modern RFID system

Bending Effect on Antenna with Radiation Performance for Electronic Tag

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

A Compact 915 MHz PCB Antenna for RFID Tag

Compact Rfid Tag Antenna with Circular Polarization and Embedded Feed Network for Metallic Objects

A UHF RFID Tag Antenna Placeable on a Metal Surface Without Degraded Performances

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

Design of UHF RFID Tag with On-Chip Antenna

Low-Cost Low-Power Uhf Rfid Tag With On-Chip Antenna

A Miniaturized Quad-Band Printed Antenna

A single port dipole for UHF RFID tag antennas with eliminated read-orientation sensitivity

Shorted Patch Antenna With Multi Slots for a UHF RFID Tag Attached to a Metallic Object

Design of a Three-Dimensional Uniform UHF Near-Field RFID Reader Antenna

Design of a miniaturized UHF tag antenna for global usage

UHF-RFID Tag Chip Integrated Reader Antenna Array