Abstract:This paper presents the modeling and optimization of a manifold-coupled superconducting quadruplexer at VHF-band. The quadruplexer consists of four individually designed channel filters with a bandwidth of 400 kHz centered at 216, 224, 232, and 240 MHz, respectively, connected to a common manifold. The complex interactions between the channel filters make the design and optimization of the quadruplexer difficult and even impossible. An equivalent circuit for the manifold and the capacitive external couplings of the four channel filters in the quadruplexer is presented. The parameters of the equivalent circuit are accurately extracted from electromagnetic simulations. Afterward, the equivalent circuit is optimized to compensate for the interactions between the channel filters and obtain a good common-port return loss and channel transfer characteristics. Thereafter, the design of the individual channel filters is improved according to the optimized parameters of the equivalent circuit. The superconducting quadruplexer is successfully designed and fabricated. The measurements show high performance and match well with the simulations. The experimental insertion losses of the four channels are less than 0.45 dB, the center frequency discrepancies of the four channels are less than 40 kHz, the common-port return loss is greater than 16.3 dB, and the out-of-band rejection is higher than 90 dB. Moreover, a high isolation greater than 75 dB between the channels is achieved.

Simultaneous Frequency- and Coupling Coefficient-Reconfigurable Quadrature Coupler

Highly Reconfigurable Dual-Band Coupler With Independently Tunable Frequency and Coupling Coefficient at the Lower Band

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

Compact Phase-Reconfigurable Couplers with Wide Tuning Range

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

An Ultra Broadband Passive Vector Modulator Phase Shifter

A Fully-Reconfigurable Coupler with Lumped Elements

A Novel Multifunctional Quadrature Hybrid Coupler

Novel Compact Coupler With Tunable Frequency, Phase Difference, and Power-Dividing Ratio

A W-band compact wide 1-dB bandwidth semi- lumped quadrature coupler in 65 nm CMOS

A Compact Microstrip Branch-Line Coupler with Capacitor Loading

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Hybrid Coupler Used as Tunable Phase Shifter Based on Varactor Diodes

Design of Impedance Transforming 90 Degree Patch Hybrid Couplers

Design of a miniaturized 90-degree quadrature hybrid coupler with harmonic suppression ability using π-shaped lumped elements

Design and Optimization of a Compact Superconducting Quadruplexer at VHF-Band with an Accurate Equivalent Circuit Model

A Compact Quasi -Circulator with High Isolation Using Reconfigurable 180° Hybrid

A Compact Dual-Band Coupler with Arbitrary Power Dividing Ratio Using Broadside-Coupled Microstrip

Reconfigurable Branch-Line Coupler with Tunable Phase Difference

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator