Abstract:The rational design of semiconductor photoanodes with sufficient light absorption, efficient photogenerated carrier separation, and fast charge transport is crucial for photoelectrochemical (PEC) water splitting. Incorporating a small-band-gap semiconductor to a large-band-gap material with matched energy band position is a promising route to improve the light harvesting and charge transport. Herein, we report the fabrication of a three-dimensional heterojunction with uniform Bi2S3 nanorods on WO3 nanoplates by hydrothermal process and chemical bath deposition. The seed layer strategy was used to assist the growth of Bi2S3 nanorods for perfect interface contact between WO3 and Bi2S3. The as-prepared WO3/Bi2S3 composite exhibited a much enhanced photocurrent (5.95 mA/cm2 at 0.9 V vs reversible hydrogen electrode), which is 35 and 1.4 times higher than those of pristine WO3 and WO3/Bi2S3 composite without a seed layer, respectively. In addition, higher incident photon-to-current conversion efficiency (68.8%) and photoconversion efficiency (1.70%) were achieved. The enhancement mechanism was investigated in detail, and the sufficient light absorption, efficient charge transport, and high carrier density simultaneously contribute to the improved PEC activity. These findings will open up new opportunities to develop other highly efficient heterostructures as photoelectrodes for PEC applications.

3D hierarchical WO3 grown on TiO2 nanotube arrays and their photoelectrochemical performance for water splitting

Enhanced photoelectrochemical water-splitting performance with a hierarchical heterostructure: Co<sub>3</sub>O<sub>4</sub> nanodots anchored TiO<sub>2</sub>@P-C<sub>3</sub>N<sub>4</sub> coreshell nanorod arrays

Preparation of Hierarchical CuO@TiO2 Nanowire Film and Its Application in Photoelectrochemical Water Splitting

Optimization of photoelectrochemical water splitting performance on hierarchical TiO2 nanotube arrays

Hierarchical 3D TiO2 Nanotube Arrays Sensitized by Graphene Oxide and ZnxCdyS for High Performance Photoelectrochemical Applications

ALD-based hydrothermal facile synthesis of a dense WO<sub>3</sub>@TiO<sub>2</sub>-Fe<sub>2</sub>O<sub>3</sub> nanodendrite array with enhanced photoelectrochemical properties

Ternary WO3/Porous‐BiVO4/FeOOH Hierarchical Architectures: Towards Highly Efficient Photoelectrochemical Performance

Facile Fabrication of Sandwich Structured WO3 Nanoplate Arrays for Efficient Photoelectrochemical Water Splitting.

Enhanced photoelectrochemical water splitting by a 3D hierarchical sea urchin-like structure: ZnO nanorod arrays on TiO 2 hollow hemisphere

Hierarchical WO3/TiO2 Nanotube Nanocomposites for Efficient Photocathodic Protection of 304 Stainless Steel under Visible Light

Design and Fabrication of an Α-Fe2o3/tio2/si 3D Hierarchical Photoanode for Improved Photoelectrochemical Water Splitting

Branched Tio2/Si Nanostructures for Enhanced Photoelectrochemical Water Splitting

Three-Dimensional WO3 Nanoplate/Bi2S3 Nanorod Heterojunction As a Highly Efficient Photoanode for Improved Photoelectrochemical Water Splitting.

3D TiO2/SnO2 Hierarchically Branched Nanowires on Transparent FTO Substrate As Photoanode for Efficient Water Splitting

Enhanced Photoelectrochemical Water Splitting by a 3D Hierarchical Sea Urchin-Like Structure: ZnO Nanorod Arrays on TiO2 Hollow Hemisphere

Cellulose nanofiber-templated three-dimension TiO2 hierarchical nanowire network for photoelectrochemical photoanode

Facile Fabrication of Three-Dimensional Interconnected Nanoporous N-TiO 2 for Efficient Photoelectrochemical Water Splitting

Hierarchical TiO2 Nanowire/microflower Photoanode Modified with Au Nanoparticles for Efficient Photoelectrochemical Water Splitting

Hierarchical Heterostructure of TiO 2 Nanosheets on CuO Nanowires for Enhanced Photocatalytic Performance

Hierarchical WO3 Nanoflakes Architecture with Enhanced Photoelectrochemical Activity

Direct Z-scheme WO3- Nanowire-Bridged TiO2 Nanorod Arrays for Highly Efficient Photoelectrochemical Overall Water Splitting