Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Research on Rotor Magnet Loss in Fractional-Slot Concentrated-Windings Permanent Magnet Motor

Influence of Rotor Configuration on Iron and Magnet Losses of Fractional-Slot IPM Machines

Simple and accurate analytical estimation of slotting effect on magnet loss in fractional-slot surface-mounted PM machines

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Analytical Model for Predicting Magnet Loss of Surface-Mounted Permanent Magnet Machines Accounting for Slotting Effect and Load

An Analytical Model of Unbalanced Magnetic Force in Fractional-Slot Surface-Mounted Permanent Magnet Machines

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Effect of Multilayer Windings on Rotor Losses of Interior Permanent Magnet Generator with Fractional-Slot Concentrated-Windings

Effects of MMF Harmonics on Rotor Eddy-Current Losses for Inner-Rotor Fractional Slot Axial Flux Permanent Magnet Synchronous Machines

A Method to Reduce Eddy Current Loss in Permanent Magnet Synchronous Motor

Accurate Calculation and Reduction of Losses in Fractional Slot Concentrated Winding Permanent Magnet Machines

Reduction of Eddy-Current Losses by Circumferential and Radial PM Segmentation in Axial Flux Permanent Magnet Machines with Fractional-Slot Concentrated Winding

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Analysis of Air Gap Magnetic Field and Noise Suppression of Permanent Magnet Synchronous Machine with Fractional Slot

Demagnetization Performance of a 7 MW Interior Permanent Magnet Wind Generator with Fractional-slot Concentrated Windings

Eddy-Current Calculation of Solid Components in Fractional Slot Axial Flux Permanent Magnet Synchronous Machines

Loss Analysis and Experiment of Fractional-Slot Concentrated-Winding Axial Flux PMSM for EV Applications

Loss analysis of rotor magnet with PWM controller switching frequency variation

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines

Loss Analysis of High Speed Permanent Magnet Synchronous Motor