Abstract:Mixed ionic‐electronic conducting (MIEC) cathode materials are promising for application in intermediate‐temperature solid oxide fuel cell due to their potentially low polarization resistance for oxygen reduction reaction. Sintering is a key step in fabricating MIEC composite cathode to form interconnected networks for gas transport and electron/ion conduction. However, the sintering process of MIEC composite electrodes has rarely been studied and thus not well understood. In this study, an enhanced kinetic Monte Carlo (KMC) model is proposed to study the microstructure evolution of the composite MIEC electrodes. The key microstructural properties such as average particle size, pore size, porosity, tortuosity, effective surface area and effective three‐phase boundary (TPB) length are comprehensively extracted from the reconstructed electrode by a series of the estimation algorithm. A backpropagation artificial neural network (ANN) is established for the quick prediction of micro properties during the sintering process. Besides, a global sensitivity analysis approach based on the elementary effects method is applied to assess the sensitivity degree of structural and operating parameters while Kolmogorov‐Smirnov test is conducted to ensure the reliability of the sampling strategy (P‐value >> .05). By considering the time evolution within the ANN surrogate model, this study firstly explores the coupling parametric effects of the KMC model at different sintering stages. The initial sintering stage (KMC steps <1000) is found to be the dominant section throughout the sintering procedure due to higher initial system free energy. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of effective surface reaction area but adversely hinder the gas transport at the same time. Free energy and sintering temperature are the determining factors in the sintering process. Even though grain growth and pore migration frequency show almost the same importance, their influence on the different output factors is quite different. This study establishes a qualitative framework to gain an essential perception about how the sintering process influences the micro properties of the electrode thereby efficiently guiding the sintering control and microstructure design. A kinetic Monte Carlo model is established considering sintering kinetics. A BP‐ANN method is proposed for quick prediction of micro‐characteristics An elementary effects approach is employed to perform global sensitivity analysis. Decisive role of initial powder fabrication on the sintering process is emphasized Porosity and tortuosity play the most significant effects than other structural factors. This study establishes a qualitative framework to gain an essential perception about how the sintering influences the micro properties of the electrode thereby efficiently guiding microstructure design. The initial sintering stage is found to be the dominant section throughout the sintering procedure. Tortuosity and porosity show the most significant influence on the formation of effective surface and TPB reaction sites. Large tortuosity and small porosity favor the formation of surface reaction area but adversely hinder gas transport.

Generalized Electrical Conductivity Relaxation Approach to Determine Electrochemical Kinetic Properties for MIECs

Determination of Electrochemical Kinetic Property for Mixed Ionic Electronic Conductors from Electrical Conductivity Relaxation Measurements

Electrochemical Kinetic Property Determination of MIECs by Comprehensive Multi-physical Coupling Model

Review: Measurement of partial electrical conductivities and transport numbers of mixed ionic-electronic conducting oxides

Oxygen Transport Kinetics of Mixed Ionic-Electronic Conductors by Coupling Focused Ion Beam Tomography and Electrochemical Impedance Spectroscopy

Chemical Relaxation in Porous Ionic-Electronic Conducting Materials Represented by the Distribution of Characteristic Times

Perspective on High-Temperature Surface Oxygen Exchange in a Porous Mixed Ionic-Electronic Conductor for Solid Oxide Cells.

Distribution of Characteristic Times: A High-Resolution Spectrum Approach for Visualizing Chemical Relaxation and Resolving Kinetic Parameters of Ionic-Electronic Conducting Ceramic Oxides

Cross-Validation of the Remarkably High Surface Oxygen Exchange Kinetics of PrBa 0.5 Sr 0.5 Co 1.5 Fe 0.5 O 5+δ : A Combined Thin-Film Mass Relaxation and Bulk Electrical Conductivity Relaxation Study

Electrochemical Techniques for Intercalation Electrode Materials in Rechargeable Batteries

Xct Images-Based Modeling for Elucidating Electrochemical Inert Phase-Dependent Multiscale Electrode Kinetic Behaviors

A Method Developed for Getting Kinetic Information from Electrochemical Impedance Spectroscopy Measured for Anodized Ti in Fluoride

An ABAQUS Implementation of Electrochemomechanical Theory for Mixed Ionic Electronic Conductors

Methodology for determining the electronic thermal conductivity of metals via direct non-equilibrium ab initio molecular dynamics

A New Method to Measure Oxygen Surface Exchange Kinetics On Porous Mixed Conducting Oxides With Simple Determination of Microstructure Parameters

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO2 Reduction Using Physical Vapor Deposition Methods.

Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

Sintering kinetics and microstructure analysis of composite mixed ionic and electronic conducting electrodes

On the Study of Lithium Diffusivity in Lithium Nickel Manganese Cobalt Oxide Cathodes

How to Improve the Accuracy of Equilibrium Molecular Dynamics for Computation of Thermal Conductivity?

(Invited) Impact of Size Scale on Electro-Chemo-Mechanical Coupling Properties in MIECs: Bulk and Thin Film (Pr,ce)o2-Δ