Abstract:The development of highly sensitive wearable and foldable pressure sensors is one of the central topics in artificial intelligence, human motion monitoring, and health care monitors. However, current pressure sensors with high sensitivity and good durability in low, medium, and high applied strains are rather limited. Herein, a flexible pressure sensor based on hierarchical three-dimensional and porous reduced graphene oxide (rGO) fiber fabrics as the key sensing element is presented. The internal conductive structural network is formed by the rGO fibers which are mutually contacted by interfused or noninterfused fiber-to-fiber interfaces. Thanks to the unique structures, the sensor can show an excellent sensitivity from low to high applied strains (0.24-70.0%), a high gauge factor (1668.48) at an applied compression of 66.0%, a good durability in a wide range of frequencies, a low detection limit (1.17 Pa), and anultrafast response time (30 ms). The dominated mechanism is that under compression, the slide of the graphene fibers through the polydimethylsiloxane matrix reduces the connection points between the fibers, causing a surge in electrical resistance. In addition, because graphene fibers are porous and defective, the change in geometry of the fibers also causes a change in the electrical resistance of the composite under compression. Furthermore, the interfused fiber-to-fiber interfaces can strengthen the mechanical stability under 0.01-1.0 Hz loadings and high applied strains, and the wrinkles on the surface of the rGO fibers increased the sensitivity under tiny loadings. In addition, the noninterfused fiber-to-fiber interfaces can produce a highly sensitive contact resistance, leading to a higher sensitivity at low applied strains.

Environmentally-friendly Conductive Cotton Fabric As Flexible Strain Sensor Based on Hot Press Reduced Graphene Oxide

Wearable Gas/strain Sensors Based on Reduced Graphene Oxide/linen Fabrics

Cotton Fabrics Decorated with Conductive Graphene Nanosheet Inks for Flexible Wearable Heaters and Strain Sensors

Flexible and highly conductive Ag/G-coated cotton fabric based on graphene dipping and silver magnetron sputtering

Reduced Graphene Oxide-Coated Carbonized Cotton Fabric Wearable Strain Sensors with Ultralow Detection Limit

Flexible cotton fabric with stable conductive coatings for piezoresistive sensors

Highly Stretchable, Ultrasensitive, and Wearable Strain Sensors Based on Facilely Prepared Reduced Graphene Oxide Woven Fabrics in an Ethanol Flame.

High-Performance Wearable Strain Sensor Based on Graphene/Cotton Fabric with High Durability and Low Detection Limit.

Electronic textiles based on aligned electrospun belt-like cellulose acetate nanofibers and graphene sheets: portable, scalable and eco-friendly strain sensor

Smart Fabric Strain Sensor Comprising Reduced Graphene Oxide with Structure-Based Negative Piezoresistivity

Multifunctional and Ultrasensitive-Reduced Graphene Oxide and Pen Ink/Polyvinyl Alcohol-Decorated Modal/Spandex Fabric for High-Performance Wearable Sensors.

Graphene Oxide/graphite Nanosheets Composite Thin Films for Wearable Strain Sensors

Carbonized Cotton Fabric for High‐Performance Wearable Strain Sensors

Reduced Graphene Oxide Coated Silk Fabrics with Conductive Property for Wearable Electronic Textiles Application

Flexible and wearable strain sensing fabrics

Wearable and washable textile-based strain sensors via a single-step, environment-friendly method

Moisture-Resilient Graphene-Dyed Wool Fabric for Strain Sensing

Graphene-Based Flexible and Eco-Friendly Wearable Electronics and Humidity Sensors

Environmentally Friendly Flexible Strain Sensor from Waste Cotton Fabrics and Natural Rubber Latex.

High-performance Flexible Strain Sensors Based on Biaxially Stretched Conductive Polymer Composites with Carbon Nanotubes Immobilized on Reduced Graphene Oxide

Highly Compressible and Sensitive Pressure Sensor under Large Strain Based on 3D Porous Reduced Graphene Oxide Fiber Fabrics in Wide Compression Strains.