Abstract:dTT is synthesized and its homopolymer (PdTT) is prepared electrochemically.PdTT presents camel, olive green, and dark blue at 0.0, 0.8, and 1.0 V, respectively.P(dTT-co-bTp) reveals high △T (41.3%) and η (149.4 cm2/C) at 1070 nm.P(dTT-co-TF)/PEDOT-PSS ECD exhibits high △T (44.7%) at 680 nm.P(dTT-co-CPdT)/PEDOT-PSS ECD displays high η (656.5 cm2/C) at 686 nm and rapid switching time.A 2,5-di(2-thienyl)thieno[3,2-b]thiophene (dTT)-containing homopolymer (PdTT) and four dTT-containing copolymers (P(dTT-co-bTp (2,2′-bithiophene)), P(dTT-co-TF), P(dTT-co-CPdT) and P(dTT-co-CPdTK)) were polymerized using electrochemical method and their electrochromic switching properties were explored. dTT shows lower onset oxidized potential (Eonset) than that of bTp, conjecturing that dTT displays more extended conjugated degree than that of bTp ring. PdTT film presents camel, olive green, and dark blue at 0.0, 0.8 and 1.0 V, respectively. Colorful-to-colorless switching investigations of polymeric films display that P(dTT-co-bTp) has high △T (41.3% at 1070 nm) and η (149.4 cm2/C at 1070 nm) in 0.2 M LiClO4/ACN/DCM solution. Five dual-layer complementary electrochromic devices based on PdTT, P(dTT-co-bTp), P(dTT-co-TF), P(dTT-co-CPdT) or P(dTT-co-CPdTK) as the anodic layer and PEDOT-PSS as the cathodic layer are assembled. P(dTT-co-TF)/PEDOT-PSS ECD exhibits high △T (44.7% at 680 nm) and satisfactory electrochemical redox stability, while P(dTT-co-CPdT)/PEDOT-PSS ECD displays high η (656.5 cm2/C at 686 nm) and rapid switching time (≤ 0.9 s). On the basis of these findings, the present work offers new structural insights for significant design of large contrast and multicolored electrochromic electrodes.Background: The thieno[3,2-b]thiophene (TT) unit is a fused heterocyclic ring, its coplanar structure and electron-donating ability can enhance carrier transporting properties of polymer chain. A 2,5-di(2-thienyl)thieno[3,2-b]thiophene (dTT) unit displays more extended conjugated degree than that of bTp, it is interesting to explore the multichromic behaviors of five dTT-based polymers and their corresponding ECDs upon applying various potentials.Methods: A dTT-containing homopolymer (PdTT) and four dTT-containing copolymers (P(dTT-co-bTp), P(dTT-co-TF), P(dTT-co-CPdT) and P(dTT-co-CPdTK)) are polymerized using electrochemical method. The spectral properties, kinetic characterizations, open-circuit memory, and electrochemical redox stability of PdTT/PEDOT-PSS, P(dTT-co-bTp)/PEDOT-PSS, P(dTT-co-TF)/PEDOT-PSS, P(dTT-co-CPdT)/PEDOT-PSS and P(dTT-co-CPdTK)/PEDOT-PSS ECDs are systematically studied.Significant Findings: The present work offers new structural insights for significant design of large contrast and multicolored electrochromic electrodes.The dual-layer electrochromic devices were assembled by arranging PdTT, P(dTT-co-bTp), P(dTT-co-TF), P(dTT-co-CPdT), or P(dTT-co-CPdTK) as the anodically coloring electrochromic polymer and PEDOT-PSS as the cathodically coloring electrochromic polymer to face each other, and two electrodes were separated by a PMMA/PC/LiClO4 electrolyte. At 0.0 V, P(dTT-co-TF) was bright camel in its neutral state and PEDOT-PSS was transparent in its oxidized state. Therefore, the P(dTT-co-TF)/PEDOT-PSS ECD was transparent. As the potential increased from 0.0 V to +1.4 V, the color of P(dTT-co-TF) and PEDOT-PSS films became grayish-blue and light blue, respectively. As the potential increased further from +1.4 V to +2.0 V, the color of PEDOT-PSS film became dark blue in its neutral state. The color of P(dTT-co-TF)/PEDOT-PSS ECD was dark blue at +2.0 V. P(dTT-co-TF)/PEDOT-PSS ECD exhibits high △T (44.7% at 680 nm) and satisfactory long-term cycling stability.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021003321-fx1_lrg.jpg">Download : Download high-res image (105KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1876107021003321-fx1.jpg">Download : Download full-size image</a></li></ol>

Back Cover: Improved Electrochromic Performance of Poly(3,4‐ethylenedioxythiophene) by Incorporating a Three‐Dimensionally Ordered Macroporous Structure (chem. Asian J. 20/2016)

Blue/green-to-transmissive Electrochromic-Supercapacitor Bifunctional Polymer Films Via Electropolymerization Containing 3,4-Propylenedioxythiophene Derivatives As Novel Donor Units

Preparation of Multicolor Electrochromic Polymer Composite Film with Laminated Structure

Electropolymerized Thiophene-Based Polymer with Pure Donor System Enable Magenta-to-transmissive Electrochromic-Supercapacitor Bifunctional Material

An Electrochromic Copolymer Based on Pyrrole and 3,4-Ethylenedioxythiophene Electrodeposited in Aqueous Micellar Solution

A Poly(3,4-Ethylenedioxythiophene):Poly(styrene Sulfonic Acid)/titanium Oxide Nanocomposite Film Synthesized by Sol–gel Assisted Electropolymerization for Electrochromic Application

Quadruple Thiophene Based Electrochromic Electrodeposited Film As High Performance Hybrid Energy Storage System

Electrochromic Properties of Polymers/Copolymers Via Electrochemical Polymerization Based on Star-Shaped Thiophene Derivatives with Different Central Cores

A Flexible Electrochromic Device Based on PEDOT: PSS Working in Visible and Infrared Band

Improving the electrochromic properties of the composite films for electrochromic device

Electrochromic Polymers Based on 1,4-Bis((9H-carbazol-9-yl)methyl)benzene and 3,4-Ethylenedioxythiophene Derivatives as Promising Electrodes for Flexible Electrochromic Devices

Tetra-EDOT Substituted 3D Electrochromic Polymers with Lower Band Gaps

Exploring the electrochromic properties of poly(thieno[3,2-: B] thiophene)s decorated with electron-deficient side groups

Electrochromic polymers based on 2,5-di(thiophen-2-yl)thieno[3,2-b]thiophene and thiophene derivatives as potential anodic layers for high performance electrochromic devices

Electrochemical And Optical Properties Of The Poly(3,4-Ethylenedioxythiophene) Film Electropolymerized In An Aqueous Sodium Dodecyl Sulfate And Lithium Tetrafluoroborate Medium

Solution-Processed Interfacial PEDOT:PSS Assembly into Porous Tungsten Molybdenum Oxide Nanocomposite Films for Electrochromic Applications

4-(Trifluoromethoxy)phenyl-Containing Polymers as Promising Anodic Materials for Electrochromic Devices

Fluorinated Oleophilic Electrochromic Copolymer Based on 3‐(N‐Trifluoroacetamido)thiophene and 3,4‐Ethylenedioxythiophene (EDOT)

Recent Advances of Synthesis, Properties, Film Fabrication Methods, Modifications of Poly(3,4‐ethylenedioxythiophene), and Applications in Solution‐Processed Photovoltaics

An In-Situ Synthesized Pedot:Pss/Tio2 Nanocomposite Film by Electropolymerization and Its Enhanced Electrochromic Properties

Electrosynthesis of electrochromic polymers based on bis-(4-(N-carbazolyl)phenyl)-phenylphosphine oxide and 3,4-propylenedioxythiophene derivatives and studies of their applications in high contrast dual type electrochromic devices