Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Research of the low impact space docking mechanism based on impedance control strategy

Study on Impact Process of Auv Underwater Docking with A Cone-Shaped Dock

Impact Analysis During Docking Process of Autonomous Underwater Vehicle

Development and Overview of Space Docking Mechanism

Impedance Control for Space Manipulator Assisted Massive Module Docking Mission

Adaptive impedance control for docking robot via Stewart parallel mechanism

Micro- and Nanosatellite Sensorless Electromagnetic Docking Control Based on the High-Frequency Injection Method

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

Docking Strategy for a Space Station Container Docking Device Based on Adaptive Sensing

Design and Analysis of a New Deployable Docking Mechanism for Microsatellites

μ-Based Theory in Compliant Force Control for Space Docking.

Design and Analysis of a Large Tolerance Docking Mechanism

Design and analysis of a new capture mechanism for space docking

<inline-formula> <tex-math notation="LaTeX">$\mu$ </tex-math></inline-formula>-Based Theory in Compliant Force Control for Space Docking

Research on Human-Robot Collaboration Method for Parallel Robots Oriented to Segment Docking

A Genderless Docking Mechanism with Passive Locking and High Rotation Misalignment Tolerance for Modular Space Robots

Docking Dynamics Between Two Spacecrafts with APDSes

$\Mu$ -Based Theory in Compliant Force Control for Space Docking

Force and Moment Compensation Method Based on Three Degree-of-Freedom Stiffness-Damping Identification for Manipulator Docking Hardware-In-The-Loop Simulation System.

A Force- and Position-Based Distortion Compensation Method for a Hardware-in-the-Loop Simulator of Space Docking

Design and Analysis of the Mechanical Structure of a Robot System for Cabin Docking