Abstract:2,4-Dinitrotoluene (2,4-DNT) is a broadly applied nitroaromatic compound with multiple applications, and its simple production has resulted in its extensive utilization in producing explosives, dyes, and rubber. This substance is hazardous and induces genetic mutations in humans, fish, and microorganisms. Thus, this research was done to assess the effectiveness of the three-dimensional electro-Fenton (3D/EF) process employing magnetic activated carbon particle electrodes (GAC/Fe 3 O 4 ) in eliminating 2,4-dinitrotoluene from water-based solutions. In this experimental investigation, Fe 3 O 4 nanoparticles were created using the chemical co-precipitation technique. The G/β-PbO 2 anode was fabricated by electrochemically depositing PbO 2 layers on graphite sheets. G/β-PbO 2 and stainless steel were utilized as the anode and cathode, respectively. The structure, particle size, and properties of the GAC/Fe 3 O 4 nanocomposite were analyzed using FESEM, XRD, and EDX. The morphology of the G/β-PbO 2 electrode was also examined using SEM. The Taguchi experimental design method was employed to identify the optimal conditions. The outcomes demonstrated that higher reaction time and current density, as well as lower pH and pollutant concentration, resulted in improved 3D/EF efficiency. Accordingly, the optimum values of parmeters were identified to be a concentration of 2,4-DNT = 50 mg/L, pH = 3, electrolysis time = 100 min, and current density = 8 mA/cm 2 . With these parameters, the degradation efficiency of 2,4-DNT through the examined system was 98.42 %, alongside removal efficiencies of 84.69 % for COD and 79.67 % for TOC. Additionally, the results indicated an increase in the average oxidation state (AOS) (from 1.27 to 1.95) and carbon oxidation state (COS) (from 1.27 to 2.75) in the 3D/EF process, along with a decrease in the COD/TOC ratio (from 1.81 to 1.36), indicating the effectiveness of the 3D/EF system in enhancing the biodegradability of 2,4-DNT. Overall, the combined 3D/EF process with a G/β-PbO 2 anode has relatively high efficiency in degrading solutions containing DNT and can be considered a viable treatment option for wastewater containing substances such as 2,4-DNT.

Optimized Degradation Removal of 2-Nitrotoluene by Combination of Cathodic Reduction and Electro-Oxidation Process

Efficient Nitrogen Removal by Simultaneous Photoelectrocatalytic Oxidation and Electrochemically Active Biofilm Denitrification

Improved Mineralization and Total Nitrogen Reduction by Combination of Electro-Reduction and Electro-Oxidation for Nitrophenol Removal.

Enhanced Biological Reduction of 2,6-Dinitrotoluene by Catalysis of Electropolymerization-Immobilized Redox Mediators

Study on the treatment of toluene nitrification wastewater by electro-catalytic reduction-electro-oxidation

Destruction of nitrotoluenes in wastewater by Electro-Fenton oxidation

Removal of Dinitrotoluene Sulfonate from Explosive Wastewater by Electrochemical Method Using Ti/IrO 2 As Electrode

Process Optimization of Electrochemical Treatment of COD and Total Nitrogen Containing Wastewater

Application Of Advanced Oxidation System Of Electrolysis Coupled Ozonation In Organic Degradation

Degradation of 2,4-dinitrotoluene from aqueous solutions by three-dimensional electro-Fenton with magnetic activated carbon particle electrodes (GAC/Fe 3 O 4 )

A sequencing electroreduction-electrooxidation system driven by atomic hydrogen for enhancing 2,4-dichloronitrobenzene removal from wastewater

Toxicity reduction in an industrial nitro-aromatic wastewater plant: an assessment and a proposed improvement.

Removal of Organic Pollutants from Mononitrotoluene (MNT) Wastewater by Reduced Pressure Distillation

Ultrasound-Assisted Mineralization of 2,4-Dinitrotoluene in Industrial Wastewater Using Persulfate Coupled with Semiconductors

Electrochemical Oxidation Combined with Adsorption : A Novel Route for Low Concentration Organic Wastewater Treatment

Reduction in the Acute Toxicity of Explosive Wastewater Containing Toxic Nitroaromatic Compounds by a Nanoscale Zerovalent Iron Pretreatment Process

Integration of heterogeneous photocatalysis (TiO2/UV) and activated sludge system operated in air lift reactor for the treatment of industrial effluent red water

Electrochemical treatment of simulated wastewater containing nitroaromatic compound with cobalt-titanium electrode

Reductive Dehalogenation Pathways and Inhibition Mechanisms of 2,5-Dichloronitrobenzene in UV/sulfite Advanced Reduction Process

Treatment of Ni-EDTA containing wastewater by electrochemical degradation using Ti<SUP>3+</SUP> self-doped TiO<sub>2</sub> nanotube arrays anode

Enhanced treatment of p-nitrophenol and coking wastewater through electrochemical and electrochemical-ozonation coupling process utilizing a novel Ti4O7 reactive electrochemical membrane anode