Thermal Insulation Properties of Fabrics in High-Intensity Heat Exposures

RL BARKER,YM LEE

1985-01-01

Abstract:On etudie les caracteristiques d'isolation thermique de non-tisses comparativement a celles de divers tissus synthetiques, dans des conditions d'exposition a de hautes intensites de chaleur, en vue d'une application dans des vetements de securite

What problem does this paper attempt to address?

Thermal Insulation: A Thermally Insulating Textile Inspired by Polar Bear Hair (adv. Mater. 14/2018)

Ying Cui,Huaxin Gong,Yujie Wang,Dewen Li,Hao Bai

DOI: https://doi.org/10.1002/adma.201870098

IF: 29.4

2018-01-01

Advanced Materials

Abstract:In article number 1706807, inspired by polar bear hair, Hao Bai and co-workers fabricate a textile with excellent thermal insulation properties by a “freeze-spinning” technique in which silk fibroin solution is continuously spun into aligned porous fibers. In addition to passively insulating heat loss, the textile can also function as a wearable heater, when doped with electroheating materials such as carbon nanotubes, to induce fast thermal response and uniform electroheating.
Thermal Protective Performance of Heat-Resistant Fabrics in Various High Intensity Heat Exposures

YM LEE,RL BARKER

DOI: https://doi.org/10.1177/004051758705700301

IF: 2.3

1987-01-01

Textile Research Journal

Abstract:The thermal protective performance of 21 heat-resistant fabrics made with poly benzimidazole (PBI), aromatic polyamide (aramid), and blends of PBI with aramid or with flame retardant rayon fibers was evaluated in laboratory tests using highly intense exposures to radiant or convective heat sources. The contribution of heat transfer mechanisms to thermal insulation is discussed, as is the degradation behavior of different materials in high intensity heating. Variables important in the development of improved fabrics for thermal protective apparel are identified.
Dynamic Gating of Infrared Radiation in a Textile.

Xu A. Zhang,Shangjie Yu,Beibei Xu,Min Li,Zhiwei Peng,Yongxin Wang,Shunliu Deng,Xiaojian Wu,Zupeng Wu,Min Ouyang,YuHuang Wang

DOI: https://doi.org/10.1126/science.aau1217

IF: 56.9

2019-01-01

Science

Abstract:The human body absorbs and loses heat largely through infrared radiation centering around a wavelength of 10 micrometers. However, neither our skin nor the textiles that make up clothing are capable of dynamically controlling this optical channel for thermal management. By coating triacetate-cellulose bimorph fibers with a thin layer of carbon nanotubes, we effectively modulated the infrared radiation by more than 35% as the relative humidity of the underlying skin changed. Both experiments and modeling suggest that this dynamic infrared gating effect mainly arises from distance-dependent electromagnetic coupling between neighboring coated fibers in the textile yarns. This effect opens a pathway for developing wearable localized thermal management systems that are autonomous and self-powered, as well as expanding our ability to adapt to demanding environments.
Analyzing the Transient Thermophysical Properties of Heat-Resistant Fabrics in TPP Exposures

RL BARKER,YM LEE

DOI: https://doi.org/10.1177/004051758705700603

IF: 2.3

1987-01-01

Textile Research Journal

Abstract:The effect of high intensity heat on the transient thermophysical properties has been investigated for eight protective fabrics made with polybenzimidazole (PBI), Kevlar®, Nomex®, and blends of PBI with Kevlar® or rayon fibers. Exposure conditions used for this study were 2.0 cal/cm 2 .s, 50/50 radiant/convective, and a 2.0 cal/cm 2 .s, 100% radiant heat. An interrupted exposure approach was used to obtain a series of test fabrics exposed for incrementally increasing durations. These samples were ana lyzed offline to determine the effect of timed exposures on properties affecting heat transfer. An analysis of momentary fluctuation reveals that two factors critically de termine the response of heat stable materials in TPP tests: one is the moisture in the fabric and its effect on fabric heating and transmission, and the other is the retention of effective thermal thickness.
Effect of Moisture on the Thermal Protective Performance of Heat-Resistant Fabrics

YM LEE,RL BARKER

DOI: https://doi.org/10.1177/073490418600400502

1986-01-01

Journal of Fire Sciences

Abstract:The effect of fabric moisture on thermal insulation properties of twelve heat resistant fabrics made with polybenzimidazole (PBI), aromatic polyamide (aramid) and blends of PBI with aramid or with flame retardant rayon fibers is investigated in several high intensity radiant and convective heat exposures. Three fabric preparations were evaluated: oven dry samples, samples condi tioned in a standard atmosphere (65% R.H., 21 ° C) and samples soaked with liquid water. This research shows that moisture enhances the thermal in sulation of all single layer protective fabrics evaluated against 2.0 cal/cm2 ·sec mixed convective exposure and against 0.48 cal/cm2 · sec radiant energy expo sure. Moisture hurts the thermal protective performance (TPP) of the same fabrics in high intensity radiant tests (i.e., 2.0 cal/cm2 · sec, 100% radiant heat). The mechanisms by which moisture acts to change the TPP of a fabric is discussed in light of fabric heating rates.
Wear comfort and thermal insulation of ceramic-imbedded fabrics with different yarn structures by thermal manikin experiment

Hyunah Kim

DOI: https://doi.org/10.1108/ijcst-06-2021-0081

2022-11-06

International Journal of Clothing Science and Technology

Abstract:Purpose This study examined the wear comfort and thermal insulation properties of Al 2 O 3 /graphite particle-imbedded sheath/core and dispersed fabrics via a thermal manikin experiment. Design/methodology/approach Al 2 O 3 /graphite sheath/core and dispersed polyethylene terephthalate (PET) yarn (POY 120d/24f) were spun using a pilot melt bi-component conjugated spinning machine, which was texturized as 75d/24f on the belt-type texturing machine. The woven fabric specimens were made using nylon 70d/34f in the warp with three types of weft yarn: Al 2 O 3 /graphite sheath/core, dispersed and regular PET yarns. Thermal insulation properties were measured and compared in terms of the heat retention rate (I) by KES-F7 apparatus and the maximum surface temperature by light heat emission equipment, as verified by the emissivity of various fabric specimens by far-infrared ray experiment. In addition, this study examined the thermal insulation (Clo value) characteristics of the clothes made of Al 2 O 3 /graphite sheath/core and dispersed fabrics using a thermal manikin apparatus, which were compared with the properties of regular PET clothing. Findings The thermal insulation of the dispersed fabric was superior to that of the sheath/core fabric, which was tentatively attributed to the higher emissivity of the dispersed yarn with Al 2 O 3 /graphite particles distributed over the whole yarn cross-section than that from the core of the sheath/core yarn. This result for the clothing measured using a thermal manikin was consistent with the higher heat retention rate (I) and the maximum surface temperature of the dispersed fabric than that of the sheath/core fabric. In addition, the thermal insulation of the dispersed and sheath/core fabrics was superior to that of the regular PET fabric, which revealed that the Al 2 O 3 /graphite particles imbedded in the dispersed and sheath/core yarns exerted a greater effect on the heat storage and release characteristics compared to that of the TiO 2 particles in regular PET yarn. The Clo values of the dispersed and sheath/core fabrics under the light-on condition were much higher than those under the light-off condition, and furthermore, the difference of the Clo value between the sheath/core and regular PET fabrics under light-on condition was approximately 1.7 times greater than that under the light-off condition. These results revealed that the far-infrared rays emitted from the Al 2 O 3 /graphite particles imbedded in the sheath/core and dispersed yarns enhance the heat storage and release characteristics from the fabric under the light-on condition, i.e. under the sunlight. Originality/value The previously examined thermal wear comfort properties of the various inorganic particle-imbedded fabrics were measured with the fabric state, not clothing, which could not provide objective data related to the actual wearing performance of clothing.

materials science, textiles
Thermal Insulations of Multilayer Clothing Systems Measured by A Bench Scale Test in Low Level Heat Exposures

Fu Ming,Weng Wenguo,Yuan Hongyong

DOI: https://doi.org/10.1108/ijcst-06-2013-0069

2014-01-01

International Journal of Clothing Science and Technology

Abstract:Purpose – The purpose of this paper is to measure the thermal insulation of protective clothing with multilayer gaps in low-level heat exposures. Design/methodology/approach – Nine different combinations of protective clothing systems with multiple air gaps are used to measure the thermal insulation by a self-designed bench-scale test apparatus in different levels of an external thermal radiation of 2-10 kW/m2. The outside and inside surface temperatures of each fabric layer are also measured to calculate the local thermal insulation of each fabric layer and each air gap. Findings – The results show that the total thermal insulation of protective clothing under thermal radiation is less than that in normal environments, and the exposed thermal radiation will worsen the total thermal insulation of the multilayer fabric systems. Air gap plays a positive role in the total thermal insulation, and thus provides the enhanced thermal protection. It is also suggested that the local resistance of the air gap closer to the external thermal radiation is more easily affected by the thermal radiation, due to the different heat transfer ways in the fabric system and the external thermal radiation. Originality/value – Effects of air gap on the thermal insulation of protective clothing, and contribution of the local thermal resistance of each fabric layer and each air gap to the total thermal insulation.
ANALYSIS OF THE THERMAL REGULATING PROPERTIES OF FIRE-FIGHTING PROTECTIVE CLOTHING WITH AN INCORPORATED PHASE-CHANGE MATERIAL

Hassan Mohammed Ali Akram,Weidong Yu,H. M. Ali Akram

DOI: https://doi.org/10.1615/heattransres.2015006992

2015-01-01

Heat Transfer Research

Abstract:Firefighters and workers in many industrial settings can suffer a noticeable effect from a very high temperature exposure. Flash fire temperature can reach more than 800°C, and the heat fluxes can be up to 80 kW/m2. Textile protective garments were used in the flash fire to prevent the skin burn and provide protection against a high heat flux environment. Applying phase-change materials (PCMs) in fabrics leads to the improvement of the thermal regulating property of the fabrics. In order to prevent or minimize skin burn damage resulting from flashover, a thermal protective composite fabric using a glass fiber and a basalt fiber incorporated into a PCM has been upgraded, developed, and compared with fabric performance without PCMs. A thermal protective performance (TPP) testing apparatus was used to evaluate the heat insulation and fire protective performance properties. Galactitol and NaCl + MgCl2 phase-change materials were used and investigated using a scanning electron microscope (SEM) and a differential scanning calorimetry (DSC) testing apparatus. Thermal radiation reflecting properties of an aluminum foil fabric in the present study were characterized using a UV−Vis−NIR (ultraviolet−visible−near infrared) spectrophotometer.

thermodynamics
Determination of heat transfer by radiation in textile fabrics by means of method with known emissivity of plates

Monika Bogusławska-Baczek,Lubos Hes

DOI: https://doi.org/10.1177/1528083713480377

2013-03-19

Journal of Industrial Textiles

Abstract:High thermal resistance of thermal insulating fabrics is a major factor in the decision to use them in protective apparel applications, sleeping bags and other functional textiles. New standards and new applications of fibre layers in industrial textiles require more accurate methods of testing of their thermal resistance and conductivity, which minimise the dependence of the measured parameters on the testing conditions, such as the temperature drop between the plates of testing instrument and infrared radiation properties of these plates. In this article, the use of a testing method based on two different temperature drops between the plates of the ALAMBETA testing instrument revealed that the portion of heat transferred by radiation through the tested woven fabrics reached 12–17%. From the second series of measurements it follows that decrease in surface emissivity of the plates of the mentioned testing instrument influences the level of heat transfer by radiation between the plates of the ALAMBETA testing instrument and may cause the changes in the experimentally determined thermal conductivity and thermal resistance of certain porous fabrics. These changes presented up to 8% for the studied non-woven fabrics with low density.

materials science, textiles
A new thermal protective clothing design with silica aerogel filled acrylic nanofibers

Pelin Altay,Selin Hanife Eryürük,Gülay Özcan,Didem Öztürk,Melda Naz Saral,Çağla Altınordu

DOI: https://doi.org/10.1108/ijcst-12-2020-0185

2022-09-25

International Journal of Clothing Science and Technology

Abstract:Purpose Firefighters are exposed to high outdoor temperature and heat stress caused by metabolic activities during firefighting and should wear protective clothing to ensure their safety and health. Traditional firefighter protective suits are bulky and heavy garments with reduced thermal comfort properties since the fabric thickness and moisture barrier layers prevent heat transfer of the garment and cause additional heat stress. The aim of this study is to reduce heat stress by creating a new fabric design with silica aerogel membrane as a moisture barrier for three-layer fabric system. Design/methodology/approach Polyacrylonitrile (PAN) nanofibers were produced with three different silica aerogel contents and used for three-layered clothing system as a moisture barrier for giving desired protectiveness and thermal comfort to firefighters. Different fabric combinations were designed using two types of outer shell fabrics, two types of moisture barrier fabrics, two types of thermal barrier fabrics and PAN/silica aerogel membranes. Findings The results show that a lighter fabric system with improved wearer's mobility and thermal comfort properties (thermal resistance and moisture permeability) is achieved with the use of PAN/silica aerogel membrane as an intermediate layer compared to commercial thermal protective fabric systems. Originality/value Differently from traditional thermal protective clothing, which may not provide adequate protection in long-term heat conditions or when exposed to flash fire, a new thermal protective clothing has been developed to be used in extremely hot environments, providing desired technical and performance properties, ease to wear comfort.
Heat and moisture transfer properties of a firefighter clothing with a new fire-resistant underwear

SH Eryuruk,H Gidik,V Koncar,F Kalaoglu,X Tao,Y Saglam

DOI: https://doi.org/10.1177/1528083721993775

2021-02-10

Journal of Industrial Textiles

Abstract:Under dynamic wear conditions, moisture management and heat transfer behaviour of clothing between the human body and its environment are very important attributes for comfort and performance. Especially considering heavy works like firefighting, it is important to analyse liquid moisture management and thermal comfort properties of fabrics that influence moisture sensation and personnel comfort feeling significantly. This study mainly investigates thermal comfort and moisture management properties of a firefighter clothing with a new fire resistant underwear. Analysing single layer fabric (underwear, outer shell, moisture barrier and thermal barrier) performance properties, together with their three-layered and four-layered combinations gives a better understanding of comfort and protective performance. For characterizing the fabric structures, weight, thickness, FTIR analysis and SEM-EDX tests were conducted. Heat and moisture transfer properties were measured with limited flame spread, thermal resistance (skin model), water vapour transmission rate (dish method), thermal conductivity, air permeability, thermal diffusion, water vapour resistance, moisture management transfer (MMT) and water vapour permeability tests.

materials science, textiles
Experimental study of moisture role and heat transfer in thermal insulation fabric against hot surface contact

Yun Su,Jie Yang,Rui Li,Guowen Song,Jun Li

DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106501

IF: 4.779

2020-10-01

International Journal of Thermal Sciences

Abstract:Understanding of moisture role and heat transfer in thermal insulation fabric was crucial for improving thermal protective performance of the fabric against hot surface contact. The hot contact tester was used to measure the heat transfer in "hot surface-fabric-skin simulant sensor". Two new indexes were proposed for investigating the effect of moisture content on the transmitted and stored energy. The moisture in the fabric presented different roles for four stages that were divided into sharply increase, stable state, slowly increase and decrease according to the changes of skin temperature. The energy storing efficiencies for these fabrics ranged from 4.1% to 20.7%. The moisture in the fabric increased the energy storing efficiencies, which decreased the heat transfer rate during the heat exposure. The discharging thermal energy previously presented an increase and then decreased over the moisture content. However, the moisture reduced the energy discharging efficiencies, thus enhancing the cooling after the heat exposure. The conclusions from this study would contribute to understanding the moisture effect on the heat transfer for improving the protective level of thermal insulation fabric.

engineering, mechanical,thermodynamics
Heat Storage and Release Characteristics of Ceramic-Imbedded Woven Fabric for Emotional Clothing

Hyun Ah Kim,Seung Jin Kim

DOI: https://doi.org/10.1515/aut-2018-0039

2019-05-22

Autex Research Journal

Abstract:Abstract This study examined the heat storage and release characteristics of ZrC-imbedded woven fabrics by light emission and thermal manikin experiments. The surface temperature of the ZrC-imbedded fabric was higher than that of the regular PET fabric. Furthermore, the Clo values of both the total and torso of the ZrC-imbedded fabric by the thermal manikin experiment were higher than those of the regular PET fabric, which suggests that the heat release is caused by far infrared rays emitted from the ZrC particles imbedded in the yarns as they receive light. This was confirmed by the higher emissivity and emissive power of the ZrC-imbedded fabric. However, the tactile hand of the ZrC-imbedded fabric needs to be improved by adjusting the structural parameters of the fabric and finishing process factors.

materials science, textiles
Influence of the Structure of 3D Woven Fabrics on Radiation Heat Resistance and Thermophysiology Properties

Ana Kiš,Stana Kovačević

DOI: https://doi.org/10.3390/textiles4020016

2024-06-17

Textiles

Abstract:The goal of this study was to investigate the influence of structural and constructional parameters of 3D fabric on two of the most significant properties of fabrics for thermal protection—resistance to radiation heat and thermophysiological properties. Today’s textile materials provide high thermal protection, but they display poor thermophysiological properties in extreme conditions. Six samples of 3D fabrics were developed using a laboratory weaving machine. The examined samples were made of identical warp, with a total of three different weft densities, and were woven in two different weaves. The conditions of the weaving process and construction were the same. EN ISO 6942:2022 and EN ISO 11092:2014 methods were used to determine the resistance of the samples to thermal radiation and thermophysiological properties. The results showed that the samples that contained folds in their structure with a larger volume of “trapped” air had better thermophysiological properties and better resistance to thermal radiation. The volume of air contained in the 3D structure was used as a thermal insulator and it did not have a negative effect on the thermophysiological properties. The described structure enabled the 3D fabric to have an optimal ratio of thermal protection and comfort, which is of crucial importance for fabrics used to make thermal protective clothing.
Research on Heat Conduction Performance of Carbon-Fibre Fabric based on Infrared Thermal Imaging Technology

Li Yunhong,Sun Xiaogang,Lian Jihong,Liu Sa

DOI: https://doi.org/10.1109/KAMW.2008.4810419

2008-01-01

Abstract:Based on the principles of thermal radiation and temperature measurement with infrared thermal imager, the different performance of heat conduction through poly-acrylonitrile carbon-fibre fabric (or carbon-fibre) was mensurated with infrared thermal imaging technology under different temperature. A new evaluation approach of carbon-fibre heat conduction performance was proposed by analysing and calculating the heat-transferring-characteristics thermal image.
Recycling of cotton apparel waste and its utilization as a thermal insulation layer in high performance clothing

M. A. Rahman Bhuiyan,Ayub Ali,Md. Mohebbullah,M. Firoz Hossain,Ayub Nabi Khan,Lijing Wang

DOI: https://doi.org/10.1186/s40691-023-00342-y

2023-06-15

Fashion and Textiles

Abstract:Recycling and converting textile waste into value-added products with enhanced functional properties pave the way toward a circular economy for sustainability. This research investigates the utilization of recycled cotton fiber from apparel cutting waste for fabricating high-performance thermal barrier fabrics. The physical characterization of the developed fabrics revealed a regular arrangement of fibers, consequently the uniform thickness of the fabric with no distortion on fiber surfaces due to the recycling operation of cotton waste. The developed fabrics also demonstrated a high softness index and low compression and bending average rigidity compared to the commercial fabric with similar thickness. The heat protection performance revealed an increase in fabric conductive and radiative heat resistance with increasing the amount of recycled cotton fiber in the fabrics. The inherent thermal resistance of cotton fiber and the low inter-fiber spacing because of their uniform orientation in the fabric lead to the high thermal resistance of developed fabrics. In the case of fabric air permeability concerning the clothing thermal comfort, no significant difference in breathability was observed among the test specimens. Besides, the moisture management profile of developed fabrics indicated the capability to create favorable thermal comfort within the clothing-skin microenvironment because of improved liquid transportation and diffusion of perspiration vapor through the fabric.

materials science, textiles
Heat release and wear comfort characteristics of the ceramic imbedded fabrics for cold weather protective clothing

HyunAh Kim

DOI: https://doi.org/10.1177/15280837221109638

2022-11-08

Journal of Industrial Textiles

Abstract:Journal of Industrial Textiles, Volume 52, Issue , July-December 2022. This paper examined the heat release and wear comfort characteristics of clothing made of aluminium oxide (Al2O3)/graphite imbedded yarn fabrics for cold weather protective clothing. The wear comfort of the clothing was compared and discussed in terms of the moisture vapor resistance of the fabric, which was verified by far-infrared and light heat emission experiments. The maximum surface temperature of the Al2O3/graphite-imbedded sheath/core yarn fabric was 3.4°C higher than that of the regular one, which was attributed to heat release by the far-infrared radiation emitted from the Al2O3/graphite imbedded in the yarns. The moisture vapor resistance of the Al2O3/graphite-imbedded sheath/core yarn clothing, as measured by a sweating thermal manikin test, was 3.6% lower than that of the regular PET one. In addition, the clothing microclimate temperature of the Al2O3/graphite sheath/core yarn fabric measured by wearer trials was approximately 1°C higher than that of the regular PET fabric, which revealed the superior thermal insulation of the Al2O3/graphite sheath/core yarn clothing compared to the regular PET one. Finally, the superior breathability with thermal insulation of the Al2O3/graphite-imbedded sheath/core yarn fabric were revealed due to its good heat release and storage properties, which support the possible applications for cold weather protective clothing.

materials science, textiles

Thermal Insulation Properties of Fabrics in High-Intensity Heat Exposures

Thermal Insulation: A Thermally Insulating Textile Inspired by Polar Bear Hair (adv. Mater. 14/2018)

Thermal Protective Performance of Heat-Resistant Fabrics in Various High Intensity Heat Exposures

Dynamic Gating of Infrared Radiation in a Textile.

Analyzing the Transient Thermophysical Properties of Heat-Resistant Fabrics in TPP Exposures

Effect of Moisture on the Thermal Protective Performance of Heat-Resistant Fabrics

Wear comfort and thermal insulation of ceramic-imbedded fabrics with different yarn structures by thermal manikin experiment

Thermal Insulations of Multilayer Clothing Systems Measured by A Bench Scale Test in Low Level Heat Exposures

ANALYSIS OF THE THERMAL REGULATING PROPERTIES OF FIRE-FIGHTING PROTECTIVE CLOTHING WITH AN INCORPORATED PHASE-CHANGE MATERIAL

Determination of heat transfer by radiation in textile fabrics by means of method with known emissivity of plates

A new thermal protective clothing design with silica aerogel filled acrylic nanofibers

Heat and moisture transfer properties of a firefighter clothing with a new fire-resistant underwear

Experimental study of moisture role and heat transfer in thermal insulation fabric against hot surface contact

Heat Storage and Release Characteristics of Ceramic-Imbedded Woven Fabric for Emotional Clothing

Influence of the Structure of 3D Woven Fabrics on Radiation Heat Resistance and Thermophysiology Properties

Research on Heat Conduction Performance of Carbon-Fibre Fabric based on Infrared Thermal Imaging Technology

Recycling of cotton apparel waste and its utilization as a thermal insulation layer in high performance clothing

Heat release and wear comfort characteristics of the ceramic imbedded fabrics for cold weather protective clothing