Abstract:REBCO coated conductors are exposed to rotating magnetic fields in various high-temperature super conducting (HTS) applications, such as HTS rotating machines and flux pumps. AC loss will begenerated in the conductors when they carry AC current under rotating magnetic fields. We define AC loss in the coated conductors with and without current as total AC loss and magnetization loss, respectively. In this work, total AC loss and magnetization loss, in a REBCO tape under rotating magnetic fields and a perpendicular AC standing wave magnetic field are numerically investigated. We employ a 2D finiteelement method (FEM) based on the T-A formulation, where T and A, are the current and magnetic vectorpotentials, respectively. In the simulations, the external magnetic field amplitude (B-m) is up to 500 mT and the reduced AC current (i=I-t/I-c0) varies from 0.1 to 0.9, where theItandIc0are the amplitude of the transport current and self-field critical current of the conductor, respectively. Two different types of rotatingfields are considered: one is a uniform field with equal amplitudes and phases at each position, and the other being a non-uniform field created by a rotating Halbach array. Different tape widths ranging from4 mm to 40 mm are considered. Interestingly, the simulation results show substantially higher magnetizationloss in the perpendicular standing wave compared to the rotating magnetic fields when B-m is over 100 m T. We attribute the result to the fact that the magnetization loss is propotional to Jc of the conductor at magnetic field amplitudes much greater than the effective penetration magnetic field. Evidently, the instantaneous loss curves of the SW model and RMF-Uniform model at 200 mT exhibited close similarity with evolvingJcvalues of the two models. Furthermore, when B-m is lower than the effective penetrated field, we observea pronounced disparity in magnetization loss of the wider tape between uniform and non-uniform rotating fields. This highlights the importance of considering the effects of non-uniform field distribution, particularlyat lower magnetic field. We further show that total AC loss under the perpendicular standing wave magnetic field remains greater than that under rotating magnetic fields when B-m>100 mT and i<0.5.

Influence of the LTS Outsert Shape on AC Losses in a REBCO HTS Insert

The Effect of Winding Conditions on the Stress Distribution in a 10.7 T REBCO Insert for the 25.7 T Superconducting Magnet

Numerical Study On Ac Loss Of An Hts Coil Placed On Laminated Silicon Steel Sheets With Distorted Ac Transport Currents

Stress Analysis of Winding Process, Cooling Down, and Excitation in a 10.7 T REBCO HTS Magnet

Numerical Simulations on the AC Loss of REBCO Stacks under Rotating Magnetic Fields

The Effect of Temperature Dependence of AC Losses in a Bi-2223/Ag Insert of an 8-T Superconducting Magnet

Numerical Simulations on AC Loss of the REBCO Tape under Rotating Magnetic Field

3-D Modeling of AC Loss in D-Shaped HTS Coils Using and - Formulation-Based Finite Element Methods

AC Loss Reduction in REBCO Coated Conductors Using the Hexagonal Arrangement Cabling Method

Magnetic Losses in Bi2223 High Temperature Superconductors Measured by AC and DC Magnetization Method

Study on AC Loss Characteristics in HTS Windings of a HTS Controllable Reactor with Orthogonally Configured Core

Numerical Analysis of Screening-Current Induced Strain in a 16 T REBCO Insert Within a 20 T Background Field

Experimental AC loss study on REBCO coil assemblies coupled with an iron cylinder

Study on Ac Losses of HTS Coil Carrying Ac Transport Current

The Effect of Different Meshes on the AC Loss Calculation of HTS Conductors

AC Loss Calculation on a 10 MJ/5 MW HTS SMES with Hybrid Winding Structure

A High-Efficiency Protecting Scheme for HTS Inserts in Case of Background Magnet Quenches

Numerical Study on AC Loss of HTS Coil with DC Transport Current under External AC Magnetic Field

Numerical Study of the Electromagnetic-Thermal Characteristics During the Charging Process of Ultra-high Field HTS Insert Magnet

Design of a 20 T Class REBCO Insert in a 15 T Low Temperature Superconducting Magnet

AC Loss Computation in Large-Scale Low-Temperature Superconducting Magnets: Multi-Scale and Semi-Analytical Procedures