Abstract:Nanocrystalline Ti1- x Crx O2 (0 ≤ x ≤ 0.20) samples were synthesised via acid-modified sol-gel process and characterised with various techniques, such as HRTEM, FESEM, Raman, XPS, DTA and VSM. The TEM image of TiO2 exhibits elongated nanoparticles with an average size of 10 nm. The HRTEM in combination with selected area electron diffraction (SAED) reveals the interplanar spacing and polycrystalline nature of the samples, respectively. FESEM micrographs divulge nonuniform morphologies and less aggregation of the particles in the doped sample. Raman spectra ensure the phase purity of the samples and a blue shift on Cr doping. X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. Room temperature magnetic measurements exhibit a significant variation in the magnetic parameters on Cr doping in TiO2 . The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance is studied for the degradation of methylene blue (MB) dye under visible light irradiation. A higher photocatalytic efficiency is found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment. LAY DESCRIPTION: In the present study, nanoparticles of TiO2 and Cr-doped TiO2 have been synthesised by a cost-effective acid-modified sol-gel process. The effect of Cr doping on the microstructure, thermal, magnetic and photocatalytic properties of TiO2 were explored in detail. The transmission electron microscopy (TEM) images exhibit the presence of elongated nanoparticles with an average size of 10 nm. Field emission scanning electron microscopy (FESEM) was used to study the surface morphology of the synthesised materials, which revealed nonuniform morphologies and less aggregation of the particles in the Cr-doped sample. Energy dispersive x-ray spectroscopy (EDS) confirms the elemental compositions with the appropriate stoichiometry of the elements. Raman spectra ensure the phase purity of the materials and also a blue shift with the incorporation of Cr ions in TiO2 . X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. The magnetic nature of all the synthesised samples was examined through the vibrating sample magnetometer (VSM) and revealed weak ferromagnetic behaviour of the samples. These results signify that the oxygen vacancies and defects play a crucial role in developing the ferromagnetic nature of oxide semiconductors. The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance of the prepared samples was studied for the degradation of methylene blue (MB) dye under irradiation of visible light. A higher photocatalytic efficiency was found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment.

Synthesis and Characterization of Fe, N and C Tri-Doped Polymorphic TiO2 and the Visible Light Photocatalytic Reduction of Cr(VI)

Facile Fabrication of N-doped TiO2 Nanocatalyst with Superior Performance under Visible Light Irradiation

Highly Enhanced Photoelectrocatalytic Properties by Α-Fe 2 O 3 Modified NF-TiO 2 Pyramids with Dominant (101) Facets

Photonic, and Photocatalytic Behavior of Tio2 Mediated by Fe, Co, Ni, N Doping and Co-Doping

Synergistic photoelectrochemical reduction of Cr(VI) and oxidation of organic pollutants by g-C3N4/TiO2-NTs electrodes.

Curcumin Doped SiO2/TiO2 Nanocomposites for Enhanced Photocatalytic Reduction of Cr (VI) under Visible Light

Preparation and Photocatalytic Activity of TiO<sub>2</sub>/Fe<sub>2</sub>O<sub>3 &Lt;/sub>nanocomposite

Co-Modified Commercial P25 Tio2 by Fe Doping and G-C3n4 Coating As High Performance Photocatalyst under Visible Light Irradiation

Coprecipitation synthesis of N, Fe doped anatase TiO2 nanoparticles and photocatalytic mechanism

Ultrathin carbon-coated Fe-TiO 2-x nanostructures for enhanced photocatalysis under visible-light irradiation

Development of TiO2 Decorated Fe2O3QDs/g-C3N4 Ternary Z-scheme Photocatalyst Involving the Investigation of Phase Analysis Via Strain Mapping and Its Photocatalytic Performance under Visible Light Illumination

Physical properties and photocatalytic activity of Cr-doped TiO2 nanoparticles

Preparation and Enhanced UV Visible Light Photoelectrocatalytic Activity of TiO2 Fe2O3/Cu Ternary Nanocomposites

Enhancement of photocatalytic activity and regeneration of Fe-doped TiO2 (Ti1−xFexO2) nanocrystalline particles synthesized using inexpensive TiO2 precursor

Enhanced photocatalytic reduction of Cr(VI) from aqueous solution using Fe0/TiO2-based polymeric nanocomposites

Effect of Calcination on Structure and Photocatalytic Property of N-TiO2/g-C3N4@diatomite Hybrid Photocatalyst for Improving Reduction of Cr(Ⅵ).

Marked Enhancement of Photocatalytic Activity and Photochemical Stability of N–doped TiO2 Nanocrystals by Fe3+/Fe2+ Surface Modification

Biomolecule-controlled hydrothermal synthesis of C-N-S-tridoped TiO2 nanocrystalline photocatalysts for NO removal under simulated solar light irradiation.

Photocatalytic Treatment of 2,4,6-Trinitotoluene in Red Water by Multi-Doped Tio2 with Enhanced Visible Light Photocatalytic Activity

Preparation of Fe3+ Doped High-Ordered TiO2 Nanotubes Arrays with Visible Photocatalytic Activities

Synthesis and Photocatalytic Properties of New Ternary Ni–Fe–Cr Hydrotalcite-Like Compounds